Vehicle |
2020 BMW X3 |
|
Manufacturer |
BMW of North America, LLC |
Manufactured between |
1/1/1900 - 1/1/1900 |
Recalled on |
2/19/2021 |
Influenced by |
BMW of North America, LLC |
Owners Notified on |
4/16/2021 |
# Affected |
13,858 |
Recalled for |
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA |
|
|
Description |
BMW of North America, LLC (BMW) is recalling certain 2019-2021 X3 sDrive30i, X3 xDrive30i, X3 M40i, X3M, X4 xDrive30i, X4 M40i, M550i, X4M, X5 sDrive40i, X5 xDrive40i, X5 xDrive50i, X5M, X5 M50i, X7 xDrive40i, X7 xDrive50i, X7 M50i, Alpina XB7, 330i, 330i xDrive, M340i, M340i xDrive, and 8 Series Coupe, Convertible and Grand Coupe, 840i, 840i xDrive, M850i xDrive, M8, 2020-2021 530e, 530e xDrive, 330e, 330e xDrive, 745Le, 745Le xDrive, X5 xDrive45e, X3 xDrive30e, X6 sDrive40i, X6 xDrive40i, X6 xDrive50i, X6 M50i, X6M, 530i, 530i xDrive, 540i, 540i xDrive, M550i xDrive, M5, 740i, 740Li, 740Li xDrive, M760i Drive, M760Li xDrive, 750Li xDrive Alpina, Alpina B7 xDrive, and 2021 4 Series Coupe 430i, 430i xDrive, M440i xDrive vehicles. When shifting into Reverse, a small portion of the rearview image may be obscured, or the screen may not illuminate. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility." |
Consequences |
If the driver relies on only the rearview camera image, the missing or reduced rearview image view can increase the risk of a crash or injury. |
Corrective action |
BMW will notify owners, and dealers will inspect the rearview camera software and update it if necessary, free of charge. The recall began April 16, 2021. Owners may contact BMW customer service at 1-800-525-7417. |
Notes |
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. |
See also |
2020 BMW X3 Recall for STEERING
2020 BMW X3 Recall for SUSPENSION, FRONT
2020 BMW X3 Recall for BACK OVER PREVENTION, SENSING SYSTEM, CAMERA
2020 BMW X3 Recall for STEERING, RACK AND PINION, PINION SHAFT
2020 BMW X3 Recall for ELECTRICAL SYSTEM, INSTRUMENT CLUSTER/PANEL
2020 BMW X3 Recall for AIR BAGS, FRONTAL, PASSENGER SIDE, INFLATOR MODULE
2020 BMW X3 Recall for AIR BAGS
2020 BMW X3 Recall for SEAT BELTS, FRONT, BUCKLE ASSEMBLY
2020 BMW X3 Recall for SEAT BELTS, FRONT, WARNING LIGHT/DEVICES
2020 BMW X3 Recall for SEAT BELTS, PRETENSIONER
2020 BMW X3 Recall for STEERING, LINKAGES, TIE ROD ASSEMBLY
2020 BMW X3 Recall for ELECTRICAL SYSTEM, SOFTWARE
2020 BMW X3 Recall for BACK OVER PREVENTION, SENSING SYSTEM, CAMERA
2020 BMW X3 Recall for ELECTRICAL SYSTEM, 12V/24V/48V BATTERY
2020 BMW X3 Recall for ELECTRICAL SYSTEM, PROPULSION SYSTEM, TRACTION BATTERY
2020 BMW X3 Recall for BACK OVER PREVENTION, SENSING SYSTEM, CAMERA
2020 BMW X3 Recall for ELECTRICAL SYSTEM, PROPULSION SYSTEM, TRACTION BATTERY
2020 BMW X3 Recall for BACK OVER PREVENTION, SOFTWARE
2020 BMW X3 Recall for ENGINE
|
Technical Service Bulletins |
Dec 27, 2021 - 280000 BACK OVER PREVENTION
???Due to an unfavorable operating point primarily in the low-end torque range, the fuel vapor scavenging that takes place in that range may result in incorrect detection of a mixture that is too rich. As a result, an incorrect mixture adap
Dec 20, 2021 - 061560 ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION:PRESSURE/TEMPERATURE SENSOR
The BMW Gesture Control function may fail permanently as a result of high temperature fluctuations.
Dec 20, 2021 - 110000 ELECTRICAL SYSTEM
BMW AG has issued a Delivery Stop (effective October 15, 2021) on certain Model Year 2022 BMW vehicles that were produced between September 28, 2021 and October 8, 2021. The issue involves the Active Crash Safety Module (ACSM) sensor.
Dec 20, 2021 - 110000 ELECTRICAL SYSTEM
Customer states the following about their vehicle: active radio or music source is interrupted, the navigation is no longer available, a black screen is shown in the Control Display, the system works again after a short interruption.
Dec 20, 2021 - 118000 ELECTRICAL SYSTEM:SOFTWARE
The "energy management" Check control message (ID code 415) is falsely displayed when entering the vehicle.
View all Technical Service Bulletins
|
|