by General Motors, LLC
Chevrolet C30 Recall for Suspension Problem - (7 Recalls Found)
Find your car listed below. Results are sorted year from newest to oldest. Select the desired vehicle to view the complete details.
Information provided by the National Highway Traffic Safety Administration.
|
Problem: THE FOUR U-BOLTS NUTS ON EITHER SIDE OF THE REAR AXLE WERE UNDER-TORQUED. Recall Details
Problem: TRUCKS WERE ASSEMBLED WITH THE LEFT-HAND LOWER CONTROL ARM TO FRAME REAR NUT TIGHTENED BELOW THE SPECIFIED TORQUE. LOW TORQUE ON THIS NUT MAY ALLOW THE ATTACHMENT BOLT TO LOOSED AND SUBSEQUENTLY FATIGUE AND BREAK. THE BOLT BREAKAGE CAN CAUSE THE LEFT HAND CONTROL ARM TO SEPARATE FROM THE FRAME. Recall Details
Problem: THE LEFT HAND LOWER CONTROL ARM CAN CRACK STARTING AT THE REAR FLANGE AND PROGRESSING TO THE BALL JOINT MOUNTING HOLE AND EVENTUALLY CAUSE THE LOWER BALL JOINT TO SEPARATE FROM THE CONTROL ARM. Recall Details
Problem: THE LEFT HAND LOWER CONTROL ARM CAN CRACK STARTING AT THE REAR FLANGE AND PROGRESSING TO THE BALL JOINT MOUNTING HOLE AND EVENTUALLY CAUSE THE LOWER BALL JOINT TO SEPARATE FROM THE CONTROL ARM. Recall Details
Problem: THE LEFT AND RIGHT FRONT SUSPENSION CROSSMEMBER STRUT RODS, WHICH GIVE ADDED STRENGTH, MAY HAVE BEEN OMITTED DURING ASSEMBLY. CONSEQUENTLY, A FRAME CROSSMEMBER CRACK COULD EVENTUALLY DEVELOP AT THE FORWARD VERTICAL FRONT SUSPENSION BOLT. Recall Details
Problem: THE FRONT SUSPENSION CONTROL ARMS WERE ASSEMBLED WITH BALL JOINTS WHICH MAY CONTAIN SOCKETS THAT WERE NOT PROPERLY HEAT-TREATED. THIS MAY CAUSE THE SOCKET TO WEAR RAPIDLY AND ALLOW THE BALL JOINT STUD TO SEPARATE FROM THE SOCKET, CAUSING EITHER THE LEFT OR RIGHT WHEEL SUSPENSION TO COLLAPSE. Recall Details
Problem: THE FRONT SUSPENSION CONTROL ARMS WERE ASSEMBLED WITH BALL JOINTS WHICH MAY CONTAIN SOCKETS THAT WERE NOT PROPERLY HEAT-TREATED. THIS MAY CAUSE THE SOCKET TO WEAR RAPIDLY AND ALLOW THE BALL JOINT STUD TO SEPARATE FROM THE SOCKET, CAUSING EITHER THE LEFT OR RIGHT WHEEL SUSPENSION TO COLLAPSE. Recall Details
|