2006 DODGE RAM 1500 RECALL - #07V038000
RECALL FOR SUSPENSION : FRONT : WHEEL BEARING
ON CERTAIN PICKUP TRUCKS, THE FRONT WHEEL BEARING MAY HAVE RECEIVED AN INSUFFICIENT QUANTITY OF GREASE DURING THE MANUFACTURING PROCESS.
Information provided by the
National Highway Traffic Safety Administration.
•
Send to a friend
•
Hide Form
Recall Details
| Vehicle |
2006 DODGE RAM 1500 |
|
| Manufacturer |
DAIMLERCHRYSLER CORPORATION |
| Manufactured between |
11/7/2005 - 4/27/2006 |
| Recalled on |
2/12/2007 |
| Influenced by |
DAIMLERCHRYSLER CORPORATION |
| Owners Notified on |
2/26/2007 |
| # Affected |
86,333 |
| Recalled for |
SUSPENSION:FRONT:WHEEL BEARING |
|
|
| Description |
ON CERTAIN PICKUP TRUCKS, THE FRONT WHEEL BEARING MAY HAVE RECEIVED AN INSUFFICIENT QUANTITY OF GREASE DURING THE MANUFACTURING PROCESS. |
| Consequences |
THIS COULD RESULT IN BEARING DEGRADATION, AND IF SUBSEQUENT NOISE AND VIBRATION ARE IGNORED, COULD RESULT IN HUB ASSEMBLY SEPARATION. THIS MAY RESULT IN A LOSS OF VEHICLE CONTROL AND CAUSE A CRASH WITHOUT WARNING. |
| Corrective action |
DEALERS WILL REPLACE THE FRONT HUB AND BEARING UNITS. THE RECALL BEGAN ON FEBRUARY 26, 2007. OWNERS MAY CONTACT DAIMLERCHRYSLER AT 1-800-853-1403. |
| Notes |
DAIMLERCHRYSLER RECALL NO. G02.CUSTOMERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV. |
| See also |
2006 DODGE RAM 1500 Recall for POWER TRAIN, TRANSFER CASE (4-WHEEL DRIVE)
2006 DODGE RAM 1500 Recall for SERVICE BRAKES, HYDRAULIC, ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP, CONTROL UNIT/MODULE
2006 DODGE RAM 1500 Recall for AIR BAGS, FRONTAL
2006 DODGE RAM 1500 Recall for SEAT BELTS, FRONT
2006 DODGE RAM 1500 Recall for STEERING, LINKAGES, TIE ROD ASSEMBLY
2006 DODGE RAM 1500 Recall for ELECTRICAL SYSTEM, IGNITION, SWITCH
2006 DODGE RAM 1500 Recall for AIR BAGS, FRONTAL, DRIVER SIDE, INFLATOR MODULE
2006 DODGE RAM 1500 Recall for AIR BAGS, FRONTAL, PASSENGER SIDE, INFLATOR MODULE
|
| Technical Service Bulletins |
May 03, 2021 - 060000 ENGINE AND ENGINE COOLING
Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only.
May 03, 2021 - 060000 ENGINE AND ENGINE COOLING
Valve Body. These may cause over drive cycling.
May 03, 2021 - 350000 EQUIPMENT
Mechanical rocker arm, intake, 1.7 ratio.
Apr 26, 2021 - 060000 ENGINE AND ENGINE COOLING
GEAR MOTOR, Transfer Case The gear motor assembly is shipped in AWD/2WD position. The transfer case needs to be positioned in AWD/2WD position to properly assemble gear motor to T-Case. Please reference Star Online publication S2121000003
May 26, 2020 - 110000 ELECTRICAL SYSTEM
Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are nece
View all Technical Service Bulletins
|
|
Comments
9/11/2012 - Ram 1500 Owner
THE WINDSHIELD WIPERS JUST STOP WORKING. IT WOULD OCCASIONALLY WORK AT TIMES BUT IT WOULDN'T CORRESPOND TO THE CORRECT SPEED. YOU CAN PUT THE WIPERS ON THE FASTEST SETTING AND IT WILL ONLY WORK ON THE SLOWEST SETTING OR JUST WORK INTERMITTENTLY AND SOMETIMES NOT WORK AT ALL. THIS SEEMS TO BE A COMMON PROBLEM WITH OTHER OWNERS OF THE 2006 DODGE RAM 1500.
2/18/2012 - gary
hi i have a 2006 ram 3500 meggacab dually 4x4 5.9 automatic, and i have the transfer case problem of automatically going into neutral even with key out of ignition. it has happened 2 times now. i was walking near my truck and i could hear the transfer case going in and out of gear (no key engine off cold ) and i went int the truck and the selector switch for the transfer case was neutral and selector was 2wd. neutral light red was on by the switch, and when i turned on the key service transfer case light was on and both 4hi and 4lo and 4 hi were flashing. and the transfer case was actually in neutral. after frigging around key on and off and playing with the switch in all places. and pushing the nutral smallpushbutton it corrected it self and went into proper operation. this happened two different occasions. what can i expect to have to fix,buy..... is it the same as the 1500. the controls don't have to be heavy duty(3500) do they.any info is great