2007 DODGE RAM 3500 RECALL - #11V350000
RECALL FOR STEERING : LINKAGES : TIE ROD ASSEMBLY
CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2008-2011 DODGE RAM 2500/3500 4X4, MANUFACTURED FROM FEBRUARY 14, 2008, THROUGH MARCH 28, 2011; MODEL YEAR 2008-2011 DODGE RAM 3500 CAB CHASSIS 4X2, MANUFACTURED FROM FEBRUARY 14, 2008, THROUGH MARCH 28, 2011; AND MODEL YEAR 2008 DODGE RAM 1500 MEGA CAB 4X4, MANUFACTURED FROM FEBRUARY 14, 2008, THROUGH AUGUST 15, 2008, BECAUSE THE LEFT TIE ROD BALL STUD MAY FRACTURE. THIS CONDITION TENDS TO OCCUR DURING LOW SPEED PARKING LOT TYPE MANEUVERS WHEN THE CUSTOMER IS MAKING A TIGHT TURN. ADDITIONALLY, MODEL YEAR 2003-2008 DODGE RAM 2500/3500 VEHICLES MAY HAVE RECEIVED THE AFFECTED TIE ROD ASSEMBLY AS A REPLACEMENT PART DURING NORMAL SERVICE.
Information provided by the
National Highway Traffic Safety Administration.
•
Send to a friend
•
Hide Form
Recall Details
| Vehicle |
2007 DODGE RAM 3500 |
|
| Manufacturer |
CHRYSLER GROUP LLC |
| Manufactured between |
1/1/1900 - 1/1/1900 |
| Recalled on |
7/11/2011 |
| Influenced by |
OFFICE OF DEFECTS INVESTIGATION |
| Owners Notified on |
10/3/2011 |
| # Affected |
242,780 |
| Recalled for |
STEERING:LINKAGES:TIE ROD ASSEMBLY |
|
|
| Description |
CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2008-2011 DODGE RAM 2500/3500 4X4, MANUFACTURED FROM FEBRUARY 14, 2008, THROUGH MARCH 28, 2011; MODEL YEAR 2008-2011 DODGE RAM 3500 CAB CHASSIS 4X2, MANUFACTURED FROM FEBRUARY 14, 2008, THROUGH MARCH 28, 2011; AND MODEL YEAR 2008 DODGE RAM 1500 MEGA CAB 4X4, MANUFACTURED FROM FEBRUARY 14, 2008, THROUGH AUGUST 15, 2008, BECAUSE THE LEFT TIE ROD BALL STUD MAY FRACTURE. THIS CONDITION TENDS TO OCCUR DURING LOW SPEED PARKING LOT TYPE MANEUVERS WHEN THE CUSTOMER IS MAKING A TIGHT TURN. ADDITIONALLY, MODEL YEAR 2003-2008 DODGE RAM 2500/3500 VEHICLES MAY HAVE RECEIVED THE AFFECTED TIE ROD ASSEMBLY AS A REPLACEMENT PART DURING NORMAL SERVICE. |
| Consequences |
THIS CONDITION COULD RESULT IN THE POTENTIAL LOSS OF DIRECTIONAL STABILITY IN THE LEFT HAND FRONT WHEEL, INCREASING THE RISK OF A CRASH. |
| Corrective action |
DEALERS WILL INSPECT THE TIE ROD ENDS FOR RELATIVE ORIENTATION AND REPLACE THE LEFT OUTER TIE ROD AS REQUIRED AND PERFORM A FRONT END TOE ALIGNMENT AS NEEDED. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON OCTOBER 3, 2011. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403. |
| Notes |
CHRYSLER SAFETY RECALL NO. L16.OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV . |
| See also |
2007 DODGE RAM 3500 Recall for POWER TRAIN, AUTOMATIC TRANSMISSION
2007 DODGE RAM 3500 Recall for VISIBILITY, REARVIEW MIRRORS/DEVICES
2007 DODGE RAM 3500 Recall for FUEL SYSTEM, GASOLINE, STORAGE, TANK ASSEMBLY
2007 DODGE RAM 3500 Recall for TRAILER HITCHES
2007 DODGE RAM 3500 Recall for ENGINE AND ENGINE COOLING, ENGINE, DIESEL
2007 DODGE RAM 3500 Recall for EQUIPMENT, APPLIANCE, AIR CONDITIONER
2007 DODGE RAM 3500 Recall for STEERING, LINKAGES, TIE ROD ASSEMBLY
2007 DODGE RAM 3500 Recall for ELECTRICAL SYSTEM, IGNITION, SWITCH
2007 DODGE RAM 3500 Recall for AIR BAGS, FRONTAL, DRIVER SIDE, INFLATOR MODULE
2007 DODGE RAM 3500 Recall for AIR BAGS, FRONTAL, PASSENGER SIDE, INFLATOR MODULE
|
| Technical Service Bulletins |
May 03, 2021 - 060000 ENGINE AND ENGINE COOLING
Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only.
May 03, 2021 - 060000 ENGINE AND ENGINE COOLING
Valve Body. These may cause over drive cycling.
May 26, 2020 - 110000 ELECTRICAL SYSTEM
Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are nece
May 26, 2020 - 160000 STRUCTURE
Disinfectant Solution Recommended for COVID-19
May 26, 2020 - 350000 EQUIPMENT
Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are nece
View all Technical Service Bulletins
|
|