1999 FORD CROWN VICTORIA RECALL - #00V157002
RECALL FOR SEAT BELTS : FRONT : ANCHORAGE
VEHICLE DESCRIPTION: PASSENGER VEHICLES USING AFTERMARKET FRONT PASSENGER SIDE SEAT BELT ASSEMBLIES THAT WERE SOLD BY FORD PARTS DEPARTMENTS FROM JANUARY 1, THROUGH JUNE 13, 2000. THESE SEAT BELT ASSEMBLIES FAIL TO COMPLY WITH THE REQUIREMENTS OF FMVSS NO. 209, "SEAT BELT ASSEMBLIES." THE EQUIPMENT INVOLVED IS SERVICE STOCK SEAT BELT ASSEMBLIES, MODEL NOS. H 9977, H 9979, T 9063, AND T 9217, BUILT BY TRW VEHICLE SAFETY SYSTEMS, INC. (TRW) MANUFACTURED FROM JUNE 1, 1998 THROUGH MAY 21, 2000. SOME OF THESE SEAT BELT ASSEMBLIES MAY HAVE BEEN INSTALLED AS SERVICE REPLACEMENT EQUIPMENT ON THE VEHICLES INVOLVED IN THE RECALL.
Information provided by the
National Highway Traffic Safety Administration.
•
Send to a friend
•
Hide Form
Recall Details
| Vehicle |
1999 FORD CROWN VICTORIA |
|
| Manufacturer |
FORD MOTOR COMPANY |
| Manufactured between |
1/1/1900 - 1/1/1900 |
| Recalled on |
6/16/2000 |
| Influenced by |
OFFICE OF VEHICLE SAFETY AND COMPLIANCE |
| Owners Notified on |
9/28/2000 |
| # Affected |
1,129 |
| Recalled for |
SEAT BELTS:FRONT:ANCHORAGE |
|
|
| Description |
VEHICLE DESCRIPTION: PASSENGER VEHICLES USING AFTERMARKET FRONT PASSENGER SIDE SEAT BELT ASSEMBLIES THAT WERE SOLD BY FORD PARTS DEPARTMENTS FROM JANUARY 1, THROUGH JUNE 13, 2000. THESE SEAT BELT ASSEMBLIES FAIL TO COMPLY WITH THE REQUIREMENTS OF FMVSS NO. 209, "SEAT BELT ASSEMBLIES." THE EQUIPMENT INVOLVED IS SERVICE STOCK SEAT BELT ASSEMBLIES, MODEL NOS. H 9977, H 9979, T 9063, AND T 9217, BUILT BY TRW VEHICLE SAFETY SYSTEMS, INC. (TRW) MANUFACTURED FROM JUNE 1, 1998 THROUGH MAY 21, 2000. SOME OF THESE SEAT BELT ASSEMBLIES MAY HAVE BEEN INSTALLED AS SERVICE REPLACEMENT EQUIPMENT ON THE VEHICLES INVOLVED IN THE RECALL. |
| Consequences |
IN THE EVENT OF A COLLISION, THESE SEAT BELTS MAY NOT RESTRAIN AN OCCUPANT INCREASING THE RISK OF INJURY. |
| Corrective action |
DEALERS WILL INSPECT THESE VEHICLES AND REPLACE THE SERVICE SEAT BELT ASSEMBLIES THAT WERE INSTALLED IN THESE VEHICLES FROM JANUARY 1 THROUGH JUNE 13, 2000. |
| Notes |
OWNER NOTIFICATION BEGAN SEPTEMBER 28, 2000. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT FORD AT 1-800-392-3673.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236). |
| See also |
1999 FORD CROWN VICTORIA Recall for SUSPENSION, FRONT, CONTROL ARM, LOWER BALL JOINT
1999 FORD CROWN VICTORIA Recall for SEAT BELTS, FRONT, ANCHORAGE
1999 FORD CROWN VICTORIA Recall for EQUIPMENT, MECHANICAL, INTEGRATED JACK/LEVELER/STABILIZER
1999 FORD CROWN VICTORIA Recall for FUEL SYSTEM, OTHER, STORAGE, TANK ASSEMBLY
|
| Technical Service Bulletins |
Oct 24, 2008 - 071100 FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY
FORD/LINCOLN MERCURY: CERTAIN 1992-2001 MODEL YEAR CROWN VICTORIA, GRAND MARQUIS, AND TOWN CAR VEHICLES REGISTERED IN THE STATES OF WISCONSIN AND CONNECTICUT UPGRADE MODIFICATIONS FOR HIGH SPEED REAR IMPACTS. *PE
Oct 24, 2008 - 091100 FUEL SYSTEM, OTHER:STORAGE:TANK ASSEMBLY
FORD/LINCOLN MERCURY: CERTAIN 1992-2001 MODEL YEAR CROWN VICTORIA, GRAND MARQUIS, AND TOWN CAR VEHICLES REGISTERED IN THE STATES OF WISCONSIN AND CONNECTICUT UPGRADE MODIFICATIONS FOR HIGH SPEED REAR IMPACTS. *PE
Oct 23, 2008 - 063140 ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR
FORD: CERTAIN 1999-2001 MODEL YEAR VEHICLES UP TO 6000 LB GVWR REGISTERED IN NEW YORK AND CERTAIN 2001 VEHICLES UP TO 6000 LB GVWR REGISTERED IN THE STATE OF MAINE, CERTIFIED FOR SALE IN CALIFORNIA-FEDERAL EMISSION WARRANTY REFUND. *PE
Feb 20, 2008 - 061000 ENGINE AND ENGINE COOLING:ENGINE
SOME 1997-2008 VEHICLES EQUIPPED WITH A 4.6L 2V, 5.4L 2V, OR 6.8L 2V ENGINE--SPARK PLUG THREAD REPAIR PROCEDURE--NOT COVERED UNDER NEW VEHICLE LIMITED WARRANTY. *NJ THIS INCLUDES F-53 MOTORHOME CHASSIS. UPDATED 2/23/10. *PE
Jan 25, 2006 - 063200 ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE
EXTENDED COVERAGE PROGRAM 05N04 - EXTENDED COVERAGE FOR COMPOSITE INTAKE MANIFOLD. THIS PROGRAM IS BEING PROVIDED AS A SETTLEMENT TO A CLASS ACTION LAWSUIT. THE TERMS OF THE SETTLEMENT EXTEND THE COVERAGE OF THE ALL-COMPOSITE INTAKE MANIF
View all Technical Service Bulletins
|
|