Ford F-250 Recall for Hoses Problem - (7 Recalls Found)
Find your car listed below. Results are sorted year from newest to oldest. Select the desired vehicle to view the complete details.
Information provided by the National Highway Traffic Safety Administration.
|
|
|
Problem: VEHICLE DESCRIPTION: LIGHT DUTY PICKUP TRUCKS MANUFACTURED AT THE KANSAS CITY OR NORFOLK ASSEMBLY PLANTS. THE FRONT FUEL LINE ASSEMBLY COULD HAVE A HOLE RUBBED THROUGH IN ONE OF TWO LOCATIONS. THE FIRST LOCATION IS BELOW THE FUEL RAIL CONNECTION WHERE THE FLEXIBLE HOSE IS CRIMPED TO THE STEEL TUBE. THE BRACKET THAT ATTACHES THE FRONT FUEL LINE TO THE TRANSMISSION COULD HAVE BEEN BENT DURING ASSEMBLY. THE SECOND LOCATION IS AT THE REAR STEEL TUBE SECTION FORWARD OF THE REAR BRACKET. DURING INSTALLATION THE REAR STEEL TUBES OF THE FRONT FUEL LINE ASSEMBLY COULD HAVE BEEN BENT DOWNWARD. IN VEHICLES EQUIPPED WITH A MANUAL 4XZ4 TRANSFER CASE SHIFTER, THE SHIFTER LINKAGE MAY CONTACT THE STEEL TUBES AS IT IS BEING SHIFTED BETWEEN 4H, 4L, 2L AND NEUTRAL. Recall Details
Problem: THE STEEL FUEL RETURN TUBES THAT CONNECT THE FRAME FUEL RETURN LINES WITH THE ENGINE FUEL RAIL CAN CONTACT THE PINCH WELD FLANGE CONNECTING THE DASH PANEL TO THE FLOOR PAN. CONTINUED CONTACT LEADS TO ABRASION OF THE STEEL FUEL RETURN TUBE AND EVENTUALLY RESULTS IN A FUEL LEAK. Recall Details
Problem: THE STEEL FUEL RETURN TUBES THAT CONNECT THE FRAME FUEL RETURN LINES WITH THE ENGINE FUEL RAIL CAN CONTACT THE PINCH WELD FLANGE CONNECTING THE DASH PANEL TO THE FLOOR PAN. CONTINUED CONTACT LEADS TO ABRASION OF THE STEEL FUEL RETURN TUBE AND EVENTUALLY RESULTS IN A FUEL LEAK. Recall Details
Problem: SPRING LOCK FUEL LINE COUPLING MAY NOT BE PROPERLY ENGAGED. Recall Details
Problem: SPRING LOCK FUEL LINE COUPLING MAY NOT BE PROPERLY ENGAGED. Recall Details
Problem: IN A COLLISION, BOLTS MAY DAMAGE OR PIERCE A FUEL LINE, CAUSING FUEL SPILLAGE. AFFECTED VEHICLES MAY NOT BE CAPABLE OF MEETING THE MINIMUM FUEL LEAKAGE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD 301, "FUEL SYSTEM INTEGRITY". Recall Details
Problem: THE INVOLVED VEHICLES MAY EXPERIENCE FUEL LEAKAGE AT THE RUBBER HOSE CONNECTING THE FUEL INLET TUBE TO THE CARBURETOR FILTER. THIS LEAKAGE CONDITION IS DUE TO INSUFFICIENT INSERTION OF THE FUEL TUBE INTO THE HOSE OR IMPROPER POSITIONING OF THE HOSE CLAMP, CAUSING THE CLAMP TO BE CRIMPED DIRECTLY OVER THE FUEL TUBE BEAD. Recall Details
|