1998 FORD RANGER RECALL - #99V062001
RECALL FOR VEHICLE SPEED CONTROL
VEHICLE DESCRIPTION: CERTAIN 1997-1999 RHD EXPLORER EQUIPPED WITH 4.0L OHV/SOHC ENGINES AND CRUISE CONTROL BUILT FROM MAY 29, 1996 THROUGH MARCH 4, 1999; 1998-1999 EXPLORER/MOUNTAINEERS EQUIPPED WITH 4.0L OHV/SOHC OR 5.0L ENGINES OR 1998-1999 RANGERS EQUIPPED WITH 2.5L, 3.0L FFV/EFI OR 4.0L ENGINES AND CRUISE CONTROL BUILT FROM JANUARY 5, 1998 THROUGH MARCH 4, 1999; 1998-1999 MUSTANGS EQUIPPED WITH 3.8L, 4.6L 2-VALVE OR 4-VALVE ENGINES AND CRUISE CONTROL BUILT FROM MARCH 2, 1998 THROUGH MARCH 4, 1999; 1999 F250/F350/F450/F550 (OVER 8,500 LBS.) TRUCKS EQUIPPED WITH 5.4L OR 6.8L ENGINES AND CRUISE CONTROL BUILT FROM MARCH 2, 1998 THROUGH MARCH 4, 1999; AND 1999 F-53 STRIPPED CHASSIS EQUIPPED WITH 5.4L OR 6.8L ENGINES AND CRUISE CONTROL BUILT FROM MARCH 2, 1998 THROUGH MARCH 4, 1999. A CRUISE CONTROL CABLE CAN INTERFERE WITH THE SPEED CONTROL SERVO PULLEY AND NOT ALLOW THE THROTTLE TO RETURN TO IDLE WHEN DISENGAGING THE CRUISE CONTROL.
Information provided by the
National Highway Traffic Safety Administration.
•
Send to a friend
•
Hide Form
Recall Details
| Vehicle |
1998 FORD RANGER |
|
| Manufacturer |
FORD MOTOR COMPANY |
| Manufactured between |
1/5/1998 - 3/4/1999 |
| Recalled on |
3/31/1999 |
| Influenced by |
FORD MOTOR COMPANY |
| Owners Notified on |
3/27/1999 |
| # Affected |
898,739 |
| Recalled for |
VEHICLE SPEED CONTROL |
|
|
| Description |
VEHICLE DESCRIPTION: CERTAIN 1997-1999 RHD EXPLORER EQUIPPED WITH 4.0L OHV/SOHC ENGINES AND CRUISE CONTROL BUILT FROM MAY 29, 1996 THROUGH MARCH 4, 1999; 1998-1999 EXPLORER/MOUNTAINEERS EQUIPPED WITH 4.0L OHV/SOHC OR 5.0L ENGINES OR 1998-1999 RANGERS EQUIPPED WITH 2.5L, 3.0L FFV/EFI OR 4.0L ENGINES AND CRUISE CONTROL BUILT FROM JANUARY 5, 1998 THROUGH MARCH 4, 1999; 1998-1999 MUSTANGS EQUIPPED WITH 3.8L, 4.6L 2-VALVE OR 4-VALVE ENGINES AND CRUISE CONTROL BUILT FROM MARCH 2, 1998 THROUGH MARCH 4, 1999; 1999 F250/F350/F450/F550 (OVER 8,500 LBS.) TRUCKS EQUIPPED WITH 5.4L OR 6.8L ENGINES AND CRUISE CONTROL BUILT FROM MARCH 2, 1998 THROUGH MARCH 4, 1999; AND 1999 F-53 STRIPPED CHASSIS EQUIPPED WITH 5.4L OR 6.8L ENGINES AND CRUISE CONTROL BUILT FROM MARCH 2, 1998 THROUGH MARCH 4, 1999. A CRUISE CONTROL CABLE CAN INTERFERE WITH THE SPEED CONTROL SERVO PULLEY AND NOT ALLOW THE THROTTLE TO RETURN TO IDLE WHEN DISENGAGING THE CRUISE CONTROL. |
| Consequences |
IF THE CRUISE CONTROL IS USED AND THIS CONDITION IS PRESENT, A STUCK THROTTLE COULD RESULT, WHICH COULD POTENTIALLY RESULT IN A CRASH. |
| Corrective action |
DEALERS WILL REPLACE THE CRUISE CONTROL CABLES. AT THE PRESENT TIME, THE REPLACEMENT CABLES ARE NOT AVAILABLE. CUSTOMERS ARE BEING ADVISED NOT TO USE THE CRUISE CONTROL SYSTEM UNTIL A REPLACEMENT CAN BE MADE. |
| Notes |
A PRE-RELEASE WARNING LETTER THAT IDENTIFIED AN INTERIM FIX UNTIL THE PARTS FOR THE PERMANENT FIX BECAME AVAILABLE WAS MAILED TO OWNERS BEGINNING MARCH 27, 1999.A SECOND OWNER NOTIFICATION, IDENTIFYING THE PERMANENT FIX WAS MAILED TO OWNERS BEGINNING MAY 24, 1999.OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT FORD AT 1-800-392-3673.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236). |
| See also |
1998 FORD RANGER Recall for FUEL SYSTEM, GASOLINE, DELIVERY, HOSES, LINES/PIPING, AND FITTINGS
1998 FORD RANGER Recall for EQUIPMENT, OTHER, LABELS
1998 FORD RANGER Recall for POWER TRAIN, AUTOMATIC TRANSMISSION
1998 FORD RANGER Recall for TIRES, TREAD/BELT
1998 FORD RANGER Recall for VEHICLE SPEED CONTROL
|
| Technical Service Bulletins |
Dec 06, 2005 - 106000 POWER TRAIN:AXLE ASSEMBLY
FRONT AXLE LEAKS FLUID FROM VENT TUBE - VEHICLES EQUIPPED WITH 4X4 OR AWD. *TT
Apr 28, 2005 - 021000 SUSPENSION:FRONT
REVISED PROCEDURE FOR ADJUSTING ALIGNMENT ON ALL SUSPENSIONS - NEW RIGHT HAND UPPER CONTROL ARM DESIGN FOR TORSION BAR FRONT SUSPENSIONS. *TT
Apr 28, 2005 - 103100 POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM, PCM)
GENERAL (PCM) POWER TRAIN CONTROL MODULE PROGRAMMING PROCEDURES. *TT
Apr 18, 2005 - 105300 POWER TRAIN:DRIVELINE:DRIVESHAFT
DRIVESHAFT THUMP CLUNK ON LIGHT ACCELERATION FROM STOP OR WHEN BRAKING AND COMING TO A STOP. *EH
Apr 15, 2005 - 103100 POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM, PCM)
GENERAL POWER TRAIN CONTROL MODULE (PCM) PROGRAMMING PROCEDURES. *TT
View all Technical Service Bulletins
|
|
Comments
2/15/2013 - Neil Mcroy
my transmission is slipping and missing i was wanting to know how to get that replaced it is a 1998 ford ranger with a recall
8/30/2010 - Marcel
Good comprehensive summary