|
Problem: ON CERTAIN PASSENGER VEHICLES, THE FUEL TANK MAY HAVE A LOCALIZED THIN WALL SECTION IN THE LOWER HALF OF THE TANK. THE FUEL TANK MAY CRACK CREATING A POTENTIAL FOR A FUEL LEAK AND FUEL ODOR. THE "SERVICE ENGINE SOON" INDICATOR MAY ILLUMINATE. Recall Details
Problem: VEHICLE DESCRIPTION: PASSENGER VEHICLES ORIGINALLY SOLD OR CURRENTLY REGISTERED IN THE STATES OF CONNECTICUT, DISTRICT OF COLUMBIA, DELAWARE, IOWA, ILLINOIS, INDIANA, KENTUCKY, MASSACHUSETTS, MARYLAND, MAINE, MICHIGAN, MINNESOTA, MISSOURI, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, WISCONSIN, AND WEST VIRGINIA. MOVEMENT OF THE FUEL LINES CAUSES THE NYLON FUEL LINE JUMPER TO CHAFE AGAINST THE FLOOR PAN. THIS WEAR CAN CAUSE A PIN HOLE IN THE FUEL LINE RESULTING IN FUEL LEAKAGE. Recall Details
Problem: VEHICLE DESCRIPTION: PASSENGER VEHICLES ORIGINALLY SOLD OR CURRENTLY REGISTERED IN THE STATES OF CONNECTICUT, DISTRICT OF COLUMBIA, DELAWARE, IOWA, ILLINOIS, INDIANA, KENTUCKY, MASSACHUSETTS, MARYLAND, MAINE, MICHIGAN, MINNESOTA, MISSOURI, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, WISCONSIN, AND WEST VIRGINIA. MOVEMENT OF THE FUEL LINES CAUSES THE NYLON FUEL LINE JUMPER TO CHAFE AGAINST THE FLOOR PAN. THIS WEAR CAN CAUSE A PIN HOLE IN THE FUEL LINE RESULTING IN FUEL LEAKAGE. Recall Details
Problem: PLASTIC ROLLOVER VALVE MOUNTING PLATE MAY NOT BE PROPERLY SEALED TO THE PLASTIC FUEL TANK. Recall Details
Problem: SPRING LOCK FUEL LINE COUPLING MAY NOT BE PROPERLY ENGAGED. Recall Details
Problem: SPRING LOCK FUEL LINE COUPLING MAY NOT BE PROPERLY ENGAGED. Recall Details
Problem: SOME OF THESE VEHICLES MAY HAVE BEEN BUILT WITH FUEL TANKS THAT HAVE INADEQUATELY WELDED FRONT SEAMS THAT CAN LEAK. Recall Details
Problem: FUEL LEAKS COULD DEVELOP IN EITHER OF TWO CONNECTIONS IN A FUEL SUPPLY LINE. ONE CONNECTION UNDER THE VEHICLE MAY HAVE BEEN DAMAGED OR IMPROPERLY INSTALLED. THE OTHER SUSPECT PART IS IN THE ENGINE COMPARTMENT AND CONTAINS A PRESSURE RELIEF VALVE. Recall Details
Problem: THE INVOLVED VEHICLES MAY EXPERIENCE FUEL LEAKAGE AT THE RUBBER HOSE CONNECTING THE FUEL INLET TUBE TO THE CARBURETOR FILTER. THIS LEAKAGE CONDITION IS DUE TO INSUFFICIENT INSERTION OF THE FUEL TUBE INTO THE HOSE OR IMPROPER POSITIONING OF THE HOSE CLAMP, CAUSING THE CLAMP TO BE CRIMPED DIRECTLY OVER THE FUEL TUBE BEAD. Recall Details
|