2001 HYUNDAI ACCENT RECALL - #01V346000
RECALL FOR VEHICLE SPEED CONTROL
VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH 1.5 LITER OR 1.6 LITER ENGINES THAT WERE ORIGINALLY SOLD IN OR CURRENTLY REGISTERED IN THE STATES OF ALASKA, COLORADO, IDAHO, ILLINOIS, INDIANA, IOWA, KANSAS, MAINE, MASSACHUSETTS, MICHIGAN, MINNESOTA, MISSOURI, MONTANA, NORTH DAKOTA, NEBRASKA, NEW HAMPSHIRE, NEW YORK, OHIO, PENNSYLVANIA, SOUTH DAKOTA, VERMONT, WISCONSIN, AND WYOMING. WHILE DRIVING AT A STEADY THROTTLE OPENING FOR AN EXTENDED PERIOD OF TIME DURING EXTREMELY COLD AMBIENT TEMPERATURES (BELOW APPROXIMATELY -5 DEGREES FAHRENHEIT WITH HIGH HUMIDITY), MOISTURE IN THE COMBUSTION CHAMBER BLOWBY GASES CAN FREEZE AND BLOCK THE POSITIVE CRANKCASE VENTILATION (PCV) VALVE AND HOSE. IF THE PCV HOSE FREEZES, COMBUSTION CHAMBER GASES ARE FORCED THROUGH THE BREATHER HOSE INTO THE AIR INTAKE HOSE AND THEN INTO THE THROTTLE BODY.
Information provided by the
National Highway Traffic Safety Administration.
•
Send to a friend
•
Hide Form
Recall Details
| Vehicle |
2001 HYUNDAI ACCENT |
|
| Manufacturer |
HYUNDAI MOTOR COMPANY |
| Manufactured between |
8/30/1999 - 6/5/2001 |
| Recalled on |
11/15/2001 |
| Influenced by |
HYUNDAI MOTOR COMPANY |
| Owners Notified on |
4/15/2002 |
| # Affected |
49,371 |
| Recalled for |
VEHICLE SPEED CONTROL |
|
|
| Description |
VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH 1.5 LITER OR 1.6 LITER ENGINES THAT WERE ORIGINALLY SOLD IN OR CURRENTLY REGISTERED IN THE STATES OF ALASKA, COLORADO, IDAHO, ILLINOIS, INDIANA, IOWA, KANSAS, MAINE, MASSACHUSETTS, MICHIGAN, MINNESOTA, MISSOURI, MONTANA, NORTH DAKOTA, NEBRASKA, NEW HAMPSHIRE, NEW YORK, OHIO, PENNSYLVANIA, SOUTH DAKOTA, VERMONT, WISCONSIN, AND WYOMING. WHILE DRIVING AT A STEADY THROTTLE OPENING FOR AN EXTENDED PERIOD OF TIME DURING EXTREMELY COLD AMBIENT TEMPERATURES (BELOW APPROXIMATELY -5 DEGREES FAHRENHEIT WITH HIGH HUMIDITY), MOISTURE IN THE COMBUSTION CHAMBER BLOWBY GASES CAN FREEZE AND BLOCK THE POSITIVE CRANKCASE VENTILATION (PCV) VALVE AND HOSE. IF THE PCV HOSE FREEZES, COMBUSTION CHAMBER GASES ARE FORCED THROUGH THE BREATHER HOSE INTO THE AIR INTAKE HOSE AND THEN INTO THE THROTTLE BODY. |
| Consequences |
MOISTURE IN THE COMBUSTION CHAMBER BLOWBY GASES MAY FREEZE INSIDE THE THROTTLE BODY BORE AND THROTTLE BODY IDLE SPEED CONTROL CIRCUIT RESULTING IN THE THROTTLE VALVE NOT CLOSING FULLY AND A HIGHER THAN NORMAL IDLE SPEED WHEN THE ACCELERATOR PEDAL IS RELEASED. |
| Corrective action |
DEALERS WILL INSTALL A NEW, RELOCATED PCV HOSE AND WILL ADDITIONALLY INSTALL A HEATED THROTTLE BODY ON THE 2000-2001 ACCENTS EQUIPPED WITH 1.5 LITER ENGINES THAT WERE PRODUCED THROUGH JANUARY 31, 2001. OWNER NOTIFICATION BEGAN APRIL 15, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT HYUNDAI AT 1-800-633-5151. |
| Notes |
ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236). |
| See also |
2001 HYUNDAI ACCENT Recall for STRUCTURE, FRAME AND MEMBERS
|
| Technical Service Bulletins |
Jun 09, 2021 - 100000 POWER TRAIN
Hyundai approves only the ATF, DCT gear oil and IVT gear oil specified in the vehicle+ó-+-+s owner+ó-+-+s manual. +»-+-+ Use of other ATF may result in improper shift quality or other drivability conditions. +»-+-+ Use of other DCT and IV
Apr 06, 2021 - 030000 BRAKES (PWS)
This bulletin provides best practice recommendations when performing brake service procedures.
Apr 06, 2021 - 060000 ENGINE AND ENGINE COOLING
This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below.
Apr 06, 2021 - 060000 ENGINE AND ENGINE COOLING
This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps
Dec 07, 2020 - 030000 BRAKES (PWS)
This bulletin describes the procedure to inspect and identify fluid which may appear around the brake caliper area.
View all Technical Service Bulletins
|
|