2013 INFINITI M35 HYBRID RECALL - #14V583000
RECALL FOR ENGINE AND ENGINE COOLING : ENGINE
Nissan North America, Inc. (Nissan) is recalling certain model year 2013-2014 Infiniti M35 hybrid vehicles manufactured April 7, 2012, to September 9, 2013, 2014 Infiniti Q50 hybrid vehicles manufactured December 10, 2012, to July 15, 2014, and 2014-2015 Infiniti Q70 hybrid vehicles manufactured April 9, 2010, to May 7, 2014. Due to a software error, In the affected vehicles, if the signal is lost from one of the two throttle position sensors (TPS), the engine control module (ECM) will go into a fail-safe mode, partially closing the throttle chamber. Should the lost signal be restored, the throttle chamber may open, regardless of the position signal from the TPS.
Information provided by the
National Highway Traffic Safety Administration.
•
Send to a friend
•
Hide Form
Recall Details
| Vehicle |
2013 INFINITI M35 HYBRID |
|
| Manufacturer |
Nissan North America, Inc. |
| Manufactured between |
4/7/2012 - 9/9/2013 |
| Recalled on |
9/22/2014 |
| Influenced by |
Nissan North America, Inc. |
| Owners Notified on |
11/10/2014 |
| # Affected |
6,562 |
| Recalled for |
ENGINE AND ENGINE COOLING:ENGINE |
|
|
| Description |
Nissan North America, Inc. (Nissan) is recalling certain model year 2013-2014 Infiniti M35 hybrid vehicles manufactured April 7, 2012, to September 9, 2013, 2014 Infiniti Q50 hybrid vehicles manufactured December 10, 2012, to July 15, 2014, and 2014-2015 Infiniti Q70 hybrid vehicles manufactured April 9, 2010, to May 7, 2014. Due to a software error, In the affected vehicles, if the signal is lost from one of the two throttle position sensors (TPS), the engine control module (ECM) will go into a fail-safe mode, partially closing the throttle chamber. Should the lost signal be restored, the throttle chamber may open, regardless of the position signal from the TPS. |
| Consequences |
The vehicle may gradually accelerate due to the throttle chamber reopening. This unexpected acceleration may increase the risk of a crash. |
| Corrective action |
Nissan will notify owners, and dealers will reprogram the ECM, free of charge. The recall began on November 10, 2014. Owners may contact Nissan customer service at 1-800-647-7261. |
| Notes |
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. |
| See also |
2013 INFINITI M35 HYBRID Recall for VEHICLE SPEED CONTROL, ACCELERATOR PEDAL
2013 INFINITI M35 HYBRID Recall for HYBRID PROPULSION SYSTEM
2013 INFINITI M35 HYBRID Recall for POWER TRAIN, DRIVELINE, DRIVESHAFT
2013 INFINITI M35 HYBRID Recall for POWER TRAIN, DRIVELINE, DRIVESHAFT
2013 INFINITI M35 HYBRID Recall for POWER TRAIN, DRIVELINE, DRIVESHAFT
2013 INFINITI M35 HYBRID Recall for POWER TRAIN, DRIVELINE, DRIVESHAFT
|
| Technical Service Bulletins |
Jul 09, 2021 - 100000 POWER TRAIN
CLICKING NOISE FROM FRONT OR REAR AXLE DURING TAKE-OFF/ACCELERATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
May 10, 2021 - 071110 FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP
SERVICE INFORMATION If the clip for the fuel filler cap tether becomes lost or is detached for any reason, it is no longer necessary to replace the fuel filler cap. The clip or "pin" is now available as a separate service part. NOTE -
May 10, 2021 - 100000 POWER TRAIN
IF YOU CONFIRM: A delay or harsh engagement into reverse is present. ACTION: 1. Refer to step 20 in the SERVICE PROCEDURE to confirm this bulletin applies to the vehicle you are working on. 2 If this bulletin applies, reprog
May 10, 2021 - 350000 EQUIPMENT
SERVICE INFORMATION If the clip for the fuel filler cap tether becomes lost or is detached for any reason, it is no longer necessary to replace the fuel filler cap. The clip or "pin" is now available as a separate service part. NOTE -
May 08, 2021 - 110000 ELECTRICAL SYSTEM
INTELLIGENT KEY NOT DETECTED / ENGINE WILL NOT START This bulletin has been amended to update the Applied Vehicles. No other changes were made. Please discard previous versions of this bulletin.
View all Technical Service Bulletins
|
|