2008 INFINITI QX56 RECALL - #10V349000
RECALL FOR AIR BAGS : SIDE/WINDOW
NISSAN IS RECALLING MODEL YEAR 2008 NISSAN ARMADA AND INFINITI QX56 VEHICLES MANUFACTURED FROM FEBRUARY 7, 2007 THROUGH FEBRUARY 14, 2007. THESE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 201, "PROTECTION IN INTERIOR IMPACT." AN OUT-OF-SPECIFICATION A-PILLAR FINISHER MIGHT IMPEDE THE CORRECT INFLATION OF THE SIDE CURTAIN AIR BAG NEAR THE UPPER PORTION OF THE B-PILLAR.
Information provided by the
National Highway Traffic Safety Administration.
•
Send to a friend
•
Hide Form
Recall Details
Vehicle |
2008 INFINITI QX56 |
|
Manufacturer |
NISSAN NORTH AMERICA, INC. |
Manufactured between |
2/7/2007 - 2/14/2007 |
Recalled on |
7/29/2010 |
Influenced by |
NISSAN NORTH AMERICA, INC. |
Owners Notified on |
8/16/2010 |
# Affected |
21 |
Recalled for |
AIR BAGS:SIDE/WINDOW |
|
|
Description |
NISSAN IS RECALLING MODEL YEAR 2008 NISSAN ARMADA AND INFINITI QX56 VEHICLES MANUFACTURED FROM FEBRUARY 7, 2007 THROUGH FEBRUARY 14, 2007. THESE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 201, "PROTECTION IN INTERIOR IMPACT." AN OUT-OF-SPECIFICATION A-PILLAR FINISHER MIGHT IMPEDE THE CORRECT INFLATION OF THE SIDE CURTAIN AIR BAG NEAR THE UPPER PORTION OF THE B-PILLAR. |
Consequences |
INCORRECT INFLATION OF THE SIDE CURTAIN AIR BAG MAY INCREASE THE RISK OF INJURY TO A VEHICLE OCCUPANT IN THE EVENT OF A CRASH REQUIRING DEPLOYMENT OF THAT AIR BAG. |
Corrective action |
DEALERS WILL REPLACE BOTH RIGHT AND LEFT FRONT PILLAR FINISHERS FREE OF CHARGE. THE SAFETY RECALL BEGAN ON AUGUST 16, 2010. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261. |
Notes |
OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV . |
See also |
2008 INFINITI QX56 Recall for SERVICE BRAKES, HYDRAULIC, PEDALS AND LINKAGES
2008 INFINITI QX56 Recall for FUEL SYSTEM, OTHER, STORAGE, FUEL GAUGE SYSTEM
|
Technical Service Bulletins |
May 10, 2021 - 010000 STEERING
If YOU CONFIRM: A vehicle needs to have the brake rotors resurfaced (front or rear). ACTION: Use the ProCut PFM Series on-car brake lathe to perform brake rotor resurfacing and follow the tips listed in this bulletin. - The ProCut P
May 10, 2021 - 010000 STEERING
SERVICE INFORMATION When servicing run flat tires or low profile tires: - Special equipment and procedures are required to avoid damage. - Specifically, Tire Pressure Monitor transmitters (TPMS sensors) can be damaged when imprope
May 10, 2021 - 010000 STEERING
SERVICE INFORMATION - This bulletin is to assist you in responding to customer questions about brake operation, and provides diagnostic and repair information for each item listed, if any should occur. - Most brake issues fall into th
May 10, 2021 - 020000 SUSPENSION
SERVICE INFORMATION This bulletin provides information to identify: - A leaking strut or a shock absorber that qualifies for replacement under warranty. - A strut or shock absorber that has slight oil seepage, a condition wh
May 10, 2021 - 020000 SUSPENSION
SERVICE INFORMATION - This bulletin is to assist you in responding to customer questions about brake operation, and provides diagnostic and repair information for each item listed, if any should occur. - Most brake issues fall into th
View all Technical Service Bulletins
|
|