1998 KIA SEPHIA RECALL - #99V318000
RECALL FOR FUEL SYSTEM, GASOLINE : DELIVERY : FUEL PUMP
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE ELECTRICAL CIRCUIT FOR THE FUEL PUMP IS GROUNDED AT JUNCTION CONNECTOR G300. IF THE PIN TENSION IS POOR, OR THE BOLT SECURING THE CONNECTOR TO THE VEHICLE FLOOR IS NOT TIGHTENED SUFFICIENTLY, A POOR CONNECTION IS MADE. AS THE FUEL PUMP OPERATES, THE POOR CONNECTION CAN CREATE HEAT WHICH IN TURN INCREASES RESISTANCE. EVENTUALLY THE FUEL PUMP WILL NOT RECEIVE ENOUGH CURRENT TO OPERATE.
Information provided by the
National Highway Traffic Safety Administration.
•
Send to a friend
•
Hide Form
Recall Details
Vehicle |
1998 KIA SEPHIA |
|
Manufacturer |
KIA MOTORS AMERICA, INC. |
Manufactured between |
9/3/1997 - 5/16/1999 |
Recalled on |
11/17/1999 |
Influenced by |
OFFICE OF DEFECTS INVESTIGATION |
Owners Notified on |
12/23/1999 |
# Affected |
102,944 |
Recalled for |
FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP |
|
|
Description |
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE ELECTRICAL CIRCUIT FOR THE FUEL PUMP IS GROUNDED AT JUNCTION CONNECTOR G300. IF THE PIN TENSION IS POOR, OR THE BOLT SECURING THE CONNECTOR TO THE VEHICLE FLOOR IS NOT TIGHTENED SUFFICIENTLY, A POOR CONNECTION IS MADE. AS THE FUEL PUMP OPERATES, THE POOR CONNECTION CAN CREATE HEAT WHICH IN TURN INCREASES RESISTANCE. EVENTUALLY THE FUEL PUMP WILL NOT RECEIVE ENOUGH CURRENT TO OPERATE. |
Consequences |
THIS CONDITION COULD CAUSE THE ENGINE TO STALL, INCREASING THE RISK OF A CRASH. |
Corrective action |
THIS CORRECTIVE ACTION IS BEING PERFORMED IN CONJUNCTION WITH RECALL NO. 99V317. |
Notes |
OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT KIA AT 1-800-333-4542.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236). |
See also |
1998 KIA SEPHIA Recall for VISIBILITY, WINDSHIELD WIPER/WASHER, LINKAGES
1998 KIA SEPHIA Recall for FUEL SYSTEM, GASOLINE, DELIVERY, FUEL PUMP
1998 KIA SEPHIA Recall for ENGINE AND ENGINE COOLING, EXHAUST SYSTEM, EMISSION CONTROL
1998 KIA SEPHIA Recall for EXTERIOR LIGHTING, HAZARD FLASHING WARNING LIGHTS, SWITCH
1998 KIA SEPHIA Recall for SEAT BELTS, FRONT, BUCKLE ASSEMBLY
|
Technical Service Bulletins |
Oct 01, 2021 - 120000 EXTERIOR LIGHTING
TECHNICAL SERVICE BULLETIN: INFORMATION FOR HEADLAMP CONDENSATION AND MOISTURE - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This b
Oct 01, 2021 - 160000 STRUCTURE
TECHNICAL SERVICE BULLETIN: INFORMATION FOR HEADLAMP CONDENSATION AND MOISTURE - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This b
Apr 16, 2018 - 060000 ENGINE AND ENGINE COOLING
PITSTOP - ENGINE COMPONENT RE-USE GUIDELINES - In general, parts and components removed during engine repairs should be considered serviceable, and should be thoroughly cleaned and transferred to the new engine.
Aug 02, 2017 - 170000 LATCHES/LOCKS/LINKAGES
TSB: MANDATORY REPLACEMENT OF LOCKING/SECURITY HARDWARE - By design, certain fasteners utilized in various Kia models are strictly intended for ?one time use?. Though not limited to the following, some examples are: axle shaft nuts with sta
Aug 02, 2017 - 354000 EQUIPMENT:MECHANICAL
TSB: MANDATORY REPLACEMENT OF LOCKING/SECURITY HARDWARE - By design, certain fasteners, which are designed to lock into place once fully attached, are utilized in various Kia models and are strictly intended for ?one time use.? Some example
View all Technical Service Bulletins
|
|
Comments
9/9/2013 - Danielle
This has been a wonderful little car for me and my family, fuel line problems set aside. The insurance is low and I get 30mpg! However, I've been stranded on several occasions because the fuel gauge does not work, and replacing the fuel pump did not fix it as the mechanic said it would. The fuel pump ground wire burned out right through the harness at one point, and currently it has been spitting back the gas I try to feed it. It's been money efficient, if one is willing to overlook those aggrevations.