Vehicle |
2009 MAZDA CX-7 |
|
Manufacturer |
Mazda North American Operations |
Manufactured between |
2/14/2006 - 5/9/2012 |
Recalled on |
8/11/2016 |
Influenced by |
Mazda North American Operations |
Owners Notified on |
9/20/2017 |
# Affected |
190,102 |
Recalled for |
SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT |
|
|
Description |
Mazda North American Operations (Mazda) is recalling certain model year 2007-2012 Mazda CX-7 vehicles manufactured February 14, 2006, to May 9, 2012. In the affected vehicles, water may enter the front suspension ball joint fittings. If the water is contaminated with salt, such as from driving on snowy roads that have been treated, the ball joint may corrode and separate from the lower control arm, resulting in a loss of steering control. |
Consequences |
A loss of steering control can increase the risk of a crash. |
Corrective action |
Mazda will notify owners, and dealers will replace both front lower control arms, free of charge. As a priority, Mazda will first address all affected 2007-2008 vehicles as well as 2009-2011 vehicles currently registered in Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia. West Virginia, Wisconsin, and the District of Columbia. The remaining vehicles will be addressed as parts are available. The recall began September 20, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9716H. |
Notes |
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. |
See also |
2009 MAZDA CX-7 Recall for AIR BAGS, FRONTAL, PASSENGER SIDE, INFLATOR MODULE
2009 MAZDA CX-7 Recall for AIR BAGS, FRONTAL, PASSENGER SIDE, INFLATOR MODULE
2009 MAZDA CX-7 Recall for AIR BAGS, FRONTAL, PASSENGER SIDE, INFLATOR MODULE
2009 MAZDA CX-7 Recall for AIR BAGS, FRONTAL, PASSENGER SIDE, INFLATOR MODULE
|
Technical Service Bulletins |
Jan 05, 2022 - 100000 POWER TRAIN
Automatic Transmission/Transaxle Cooler and Lines Flushing Procedure: Automatic Transaxle/Transmission (A/T) oil cooler and lines must be power flushed completely before an overhauled or replacement A/T is installed (except SKYACTIV-DRIVE)
Jan 05, 2022 - 110000 ELECTRICAL SYSTEM
Battery Maintenance: This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost.
Oct 30, 2021 - 061540 ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION:OIL COOLER
Some customers may complain about high engine oil consumption. Before attempting any repairs, verify the complaint by using the guideline below to determine if an engine repair is necessary:
Oct 30, 2021 - 070000 FUEL SYSTEM, GASOLINE
Ethanol is becoming a common additive in gasoline. Gasoline containing ethanol is likely available at your local gasoline station. Typical blends of ethanol include E10 and E85. E10: A blend of 10% ethanol and 90% gasoline. E85: A blend of
Oct 30, 2021 - 090000 FUEL SYSTEM, OTHER
Ethanol is becoming a common additive in gasoline. Gasoline containing ethanol is likely available at your local gasoline station. Typical blends of ethanol include E10 and E85. E10: A blend of 10% ethanol and 90% gasoline. E85: A blend of
View all Technical Service Bulletins
|
|