| Vehicle |
2009 MAZDA MAZDA6 |
|
| Manufacturer |
Mazda North American Operations |
| Manufactured between |
2/4/2008 - 8/24/2012 |
| Recalled on |
9/25/2013 |
| Influenced by |
OFFICE OF DEFECTS INVESTIGATION |
| Owners Notified on |
10/29/2013 |
| # Affected |
161,400 |
| Recalled for |
LATCHES/LOCKS/LINKAGES:DOORS:LATCH |
|
|
| Description |
Mazda is recalling certain model year 2009-2013 Mazda6 vehicles manufactured February 4, 2008, through August 24, 2012. The door latch mounting screws may become loose. |
| Consequences |
If all three door latch mounting screws become excessively loose the door latch mechanism would not engage and the door might open while the vehicle is in motion increasing the risk of accident or injury. |
| Corrective action |
Mazda will notify owners, and dealers will apply a thread locking adhesive to the door screws and retorque them, free of charge. The recall began on October 29, 2013. Owners may contact Mazda at 1-800-222-5500. Mazda's recall number is 7013I. |
| Notes |
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. |
| See also |
2009 MAZDA MAZDA6 Recall for STRUCTURE, BODY, DOOR, HINGE AND ATTACHMENTS
2009 MAZDA MAZDA6 Recall for FUEL SYSTEM, GASOLINE, STORAGE, TANK ASSEMBLY
2009 MAZDA MAZDA6 Recall for AIR BAGS
2009 MAZDA MAZDA6 Recall for AIR BAGS, FRONTAL, SENSOR/CONTROL MODULE-INACTIVE
2009 MAZDA MAZDA6 Recall for AIR BAGS, FRONTAL, PASSENGER SIDE, INFLATOR MODULE
2009 MAZDA MAZDA6 Recall for AIR BAGS, FRONTAL, PASSENGER SIDE, INFLATOR MODULE
2009 MAZDA MAZDA6 Recall for AIR BAGS, FRONTAL, PASSENGER SIDE, INFLATOR MODULE
2009 MAZDA MAZDA6 Recall for SUSPENSION, FRONT, CONTROL ARM
2009 MAZDA MAZDA6 Recall for STRUCTURE
2009 MAZDA MAZDA6 Recall for AIR BAGS, FRONTAL, PASSENGER SIDE, INFLATOR MODULE
|
| Technical Service Bulletins |
Jan 05, 2022 - 100000 POWER TRAIN
Automatic Transmission/Transaxle Cooler and Lines Flushing Procedure: Automatic Transaxle/Transmission (A/T) oil cooler and lines must be power flushed completely before an overhauled or replacement A/T is installed (except SKYACTIV-DRIVE)
Jan 05, 2022 - 110000 ELECTRICAL SYSTEM
Battery Maintenance: This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost.
Oct 30, 2021 - 061540 ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION:OIL COOLER
Some customers may complain about high engine oil consumption. Before attempting any repairs, verify the complaint by using the guideline below to determine if an engine repair is necessary:
Oct 30, 2021 - 070000 FUEL SYSTEM, GASOLINE
Ethanol is becoming a common additive in gasoline. Gasoline containing ethanol is likely available at your local gasoline station. Typical blends of ethanol include E10 and E85. E10: A blend of 10% ethanol and 90% gasoline. E85: A blend of
Oct 30, 2021 - 090000 FUEL SYSTEM, OTHER
Ethanol is becoming a common additive in gasoline. Gasoline containing ethanol is likely available at your local gasoline station. Typical blends of ethanol include E10 and E85. E10: A blend of 10% ethanol and 90% gasoline. E85: A blend of
View all Technical Service Bulletins
|
|