1995 NISSAN 240SX RECALL - #94V135000
RECALL FOR SERVICE BRAKES, HYDRAULIC : BRAKE FLUID LOW WARNING : LAMP
THE INSTRUMENT PANEL BRAKE WARNING LIGHT WILL NOT ILLUMINATE WHEN THE BRAKE FLUID LEVEL IN THE MASTER CYLINDER DROPS SUFFICIENTLY TO ACTIVATE THE LOW LEVEL SWITCH DUE TO AN IMPROPERLY WIRED DIODE, REQUIRED BY FMVSS NO. 105, "HYDRAULIC BRAKE SYSTEMS."
Information provided by the
National Highway Traffic Safety Administration.
•
Send to a friend
•
Hide Form
Recall Details
| Vehicle |
1995 NISSAN 240SX |
|
| Manufacturer |
NISSAN NORTH AMERICA, INC. |
| Manufactured between |
2/1/1994 - 1/1/1995 |
| Recalled on |
7/28/1994 |
| Influenced by |
NISSAN NORTH AMERICA, INC. |
| Owners Notified on |
8/19/1994 |
| # Affected |
7,500 |
| Recalled for |
SERVICE BRAKES, HYDRAULIC:BRAKE FLUID LOW WARNING: LAMP |
|
|
| Description |
THE INSTRUMENT PANEL BRAKE WARNING LIGHT WILL NOT ILLUMINATE WHEN THE BRAKE FLUID LEVEL IN THE MASTER CYLINDER DROPS SUFFICIENTLY TO ACTIVATE THE LOW LEVEL SWITCH DUE TO AN IMPROPERLY WIRED DIODE, REQUIRED BY FMVSS NO. 105, "HYDRAULIC BRAKE SYSTEMS." |
| Consequences |
CONSEQUENCE OF NON-COMPLIANCE: THERE WOULD BE NO INDICATION TO THE DRIVER OF THE VEHICLE THAT BRAKE FLUID WAS LOW. LOW BRAKE FLUID CAN BE CAUSED BY A LEAK IN THE SYSTEM WHICH MAY RESULT IN PARTIAL OR COMPLETE LOSS OF BRAKES AND AN ACCIDENT. |
| Corrective action |
DEALERS WILL CORRECT THE ELECTRICAL CIRCUIT FOR THE BRAKE WARNING SYSTEM SO THAT THE WARNING LAMP WILL ILLUMINATE WHEN THE LOW LEVEL SWITCH IS ACTIVATED. |
| Notes |
SYSTEM: BRAKES; HYDRAULIC; LAMP LIGHT; BRAKE WARNING; FMVSS 105.VEHICLE DESCRIPTION: PASSENGER CARS.NOTE: IF YOUR VEHICLE IS PRESENTED TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND THE REMEDY IS NOT PROVIDED WITHIN A REASONABLE TIME AND FREE OF CHARGE, OR THE REMEDY DOES NOT CORRECT THE DEFECT OR NONCOMPLIANCE, PLEASE CONTACT NISSAN SERVICE CENTER AT 1-800-647-7261. ALSO, CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393. |
| See also |
|
| Technical Service Bulletins |
May 10, 2021 - 010000 STEERING
If YOU CONFIRM: A vehicle needs to have the brake rotors resurfaced (front or rear). ACTION: Use the ProCut PFM Series on-car brake lathe to perform brake rotor resurfacing and follow the tips listed in this bulletin. - The ProCut P
May 10, 2021 - 010000 STEERING
SERVICE INFORMATION - This bulletin is to assist you in responding to customer questions about brake operation, and provides diagnostic and repair information for each item listed, if any should occur. - Most brake incidents fall into
May 10, 2021 - 020000 SUSPENSION
SERVICE INFORMATION This bulletin provides information to identify: - A leaking strut or a shock absorber that qualifies for replacement under warranty. - A strut or shock absorber that has slight oil seepage, a condition wh
May 10, 2021 - 020000 SUSPENSION
SERVICE INFORMATION - This bulletin is to assist you in responding to customer questions about brake operation, and provides diagnostic and repair information for each item listed, if any should occur. - Most brake incidents fall into
May 10, 2021 - 030000 BRAKES (PWS)
If YOU CONFIRM: A vehicle needs to have the brake rotors resurfaced (front or rear). ACTION: Use the ProCut PFM Series on-car brake lathe to perform brake rotor resurfacing and follow the tips listed in this bulletin. - The ProCut P
View all Technical Service Bulletins
|
|