1994 NISSAN QUEST RECALL - #00V419001
RECALL FOR FUEL SYSTEM, GASOLINE : STORAGE : TANK ASSEMBLY
VEHICLE DESCRIPTION: MINIVANS. THE FUEL TANK VENT HOSE ALLOWS AIR TO VENT FROM THE FUEL TANK DURING REFUELING. CRACKS HAVE DEVELOPED IN THE VENT HOSE. IF (1) THE FUEL TANK IS OVERFILLED, NOT ALLOWING EXCESS FUEL IN THE VENT HOSE TO FLOW BACK INTO THE TANK, (2) THE VEHICLE IS DRIVEN ONLY A SHORT DISTANCE AFTER REFUELING AND, (3) THERE IS SUBSEQUENTLY SIGNIFICANT HEATING OF THE FUEL TANK, THE FUEL IN THE TANK CAN EXPAND INTO THE VENT HOSE AND LEAK FUEL.
Information provided by the
National Highway Traffic Safety Administration.
•
Send to a friend
•
Hide Form
Recall Details
Vehicle |
1994 NISSAN QUEST |
|
Manufacturer |
NISSAN NORTH AMERICA, INC. |
Manufactured between |
4/1/1992 - 6/30/1997 |
Recalled on |
12/18/2000 |
Influenced by |
OFFICE OF DEFECTS INVESTIGATION |
Owners Notified on |
2/16/2001 |
# Affected |
268,229 |
Recalled for |
FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY |
|
|
Description |
VEHICLE DESCRIPTION: MINIVANS. THE FUEL TANK VENT HOSE ALLOWS AIR TO VENT FROM THE FUEL TANK DURING REFUELING. CRACKS HAVE DEVELOPED IN THE VENT HOSE. IF (1) THE FUEL TANK IS OVERFILLED, NOT ALLOWING EXCESS FUEL IN THE VENT HOSE TO FLOW BACK INTO THE TANK, (2) THE VEHICLE IS DRIVEN ONLY A SHORT DISTANCE AFTER REFUELING AND, (3) THERE IS SUBSEQUENTLY SIGNIFICANT HEATING OF THE FUEL TANK, THE FUEL IN THE TANK CAN EXPAND INTO THE VENT HOSE AND LEAK FUEL. |
Consequences |
FUEL LEAKAGE IN THE PRESENCE OF AN IGNITION SOURCE CAN RESULT IN A FIRE. |
Corrective action |
DEALERS WILL REPLACE THE VENT HOSE. |
Notes |
OWNER NOTIFICATION BEGAN FEBRUARY 16, 2001.OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT NISSAN AT 1-800-647-7261.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236). |
See also |
1994 NISSAN QUEST Recall for EXTERIOR LIGHTING, TAIL LIGHTS
|
Technical Service Bulletins |
May 10, 2021 - 010000 STEERING
If YOU CONFIRM: A vehicle needs to have the brake rotors resurfaced (front or rear). ACTION: Use the ProCut PFM Series on-car brake lathe to perform brake rotor resurfacing and follow the tips listed in this bulletin. - The ProCut P
May 10, 2021 - 010000 STEERING
SERVICE INFORMATION - This bulletin is to assist you in responding to customer questions about brake operation, and provides diagnostic and repair information for each item listed, if any should occur. - Most brake incidents fall into
May 10, 2021 - 020000 SUSPENSION
SERVICE INFORMATION This bulletin provides information to identify: - A leaking strut or a shock absorber that qualifies for replacement under warranty. - A strut or shock absorber that has slight oil seepage, a condition wh
May 10, 2021 - 020000 SUSPENSION
SERVICE INFORMATION - This bulletin is to assist you in responding to customer questions about brake operation, and provides diagnostic and repair information for each item listed, if any should occur. - Most brake incidents fall into
May 10, 2021 - 030000 BRAKES (PWS)
If YOU CONFIRM: A vehicle needs to have the brake rotors resurfaced (front or rear). ACTION: Use the ProCut PFM Series on-car brake lathe to perform brake rotor resurfacing and follow the tips listed in this bulletin. - The ProCut P
View all Technical Service Bulletins
|
|