|
Problem: Nissan North America, Inc. (Nissan) is recalling certain 2017 Nissan NV200, Sentra, NV3500 Van, NV3500 Bus, NV200 Taxi, NV1500, NV2500 Van, Chevrolet City Express, 2017-2018 Frontier, Versa Note, and Versa Sedan vehicles that have a mechanical (physical) key ignition system. In these models, over time, the weight on the key ring and road conditions or some other jarring event may cause the ignition switch to move out of the run position to the accessory position, turning off the engine. Recall Details
Problem: Nissan North America, Inc. (Nissan) is recalling certain model year 2016 LEAF vehicles manufactured February 24, 2016, to March 23, 2016, and Sentra vehicles manufactured February 9, 2016, to March 4, 2016. The wiring harness connector may disconnect from the dual-stage passenger air bag. Recall Details
Problem: Nissan North America, Inc. (Nissan) is recalling certain model year 2016 Sentra vehicles manufactured April 11, 2016, through April 26, 2016. The engine room harness may have a terminal pin too large to maintain a connection with the Engine Control Unit (ECU). Recall Details
Problem: Nissan North America, Inc. (Nissan) is recalling certain model year 2013-2014 Altima, LEAF, Pathfinder, and Sentra, model year 2013 NV200 (aka Taxi) and Infiniti JX35 and model year 2014 Infiniti Q50 and QX60 vehicles. In the affected vehicles, the occupant classification system (OCS) software may incorrectly classify the passenger seat as empty, when it is occupied by an adult. Recall Details
Problem: Nissan North America, Inc. (Nissan) is recalling certain model year 2013-2014 Altima, LEAF, Pathfinder, and Sentra, model year 2013 NV200 (aka Taxi) and Infiniti JX35 and model year 2014 Infiniti Q50 and QX60 vehicles. In the affected vehicles, the occupant classification system (OCS) software may incorrectly classify the passenger seat as empty, when it is occupied by an adult. Recall Details
Problem: NISSAN IS RECALLING CERTAIN MODEL YEAR 2010-2011 SENTRA VEHICLES, MANUFACTURED FROM MAY 22, 2010, THROUGH JULY 8, 2010. DUE TO A MACHINING IRREGULARITY, THE BOLT/WASHER SURFACE ON THE POSITIVE BATTERY TERMINAL CABLE END MAY ALLOW FOR A GAP TO OCCUR IN THE CONTACT AREA OF THE TERMINAL. THIS CAN RESULT IN A VOLTAGE DROP THAT MAY CAUSE DIFFICULTY STARTING THE VEHICLE AND COULD CAUSE DAMAGE TO THE ENGINE CONTROL MODULE. Recall Details
Problem: NISSAN IS RECALLING CERTAIN MODEL YEAR 2010-2011 SENTRA VEHICLES EQUIPPED WITH MR20 ENGINES, MANUFACTURED FROM MAY 11, 2010, TO MAY 22, 2010, AND JULY 8, 2010, TO OCTOBER 25, 2010. THE ZINC COATING APPLIED TO THE TERMINAL STUD BOLT WAS THICKER THAN SPECIFICATION. THIS CAN RESULT IN A VOLTAGE DROP THAT MAY CAUSE DIFFICULTY STARTING THE VEHICLE AND COULD CAUSE DAMAGE TO THE ENGINE CONTROL MODULE (ECM). Recall Details
Problem: NISSAN IS RECALLING CERTAIN MODEL YEAR 2010-2011 SENTRA VEHICLES, MANUFACTURED FROM MAY 22, 2010, THROUGH JULY 8, 2010. DUE TO A MACHINING IRREGULARITY, THE BOLT/WASHER SURFACE ON THE POSITIVE BATTERY TERMINAL CABLE END MAY ALLOW FOR A GAP TO OCCUR IN THE CONTACT AREA OF THE TERMINAL. THIS CAN RESULT IN A VOLTAGE DROP THAT MAY CAUSE DIFFICULTY STARTING THE VEHICLE AND COULD CAUSE DAMAGE TO THE ENGINE CONTROL MODULE. Recall Details
Problem: NISSAN IS RECALLING CERTAIN MODEL YEAR 2010-2011 SENTRA VEHICLES EQUIPPED WITH MR20 ENGINES, MANUFACTURED FROM MAY 11, 2010, TO MAY 22, 2010, AND JULY 8, 2010, TO OCTOBER 25, 2010. THE ZINC COATING APPLIED TO THE TERMINAL STUD BOLT WAS THICKER THAN SPECIFICATION. THIS CAN RESULT IN A VOLTAGE DROP THAT MAY CAUSE DIFFICULTY STARTING THE VEHICLE AND COULD CAUSE DAMAGE TO THE ENGINE CONTROL MODULE (ECM). Recall Details
Problem: ON CERTAIN PASSENGER VEHICLES EQUIPPED WITH THE QG18DE ENGINE OR QR25DE ENGINES, THE FOAM MATERIAL USED FOR THE INTERIOR LINING OF THE ELECTRONIC CONTROL MODULE (ECM) BOX EMITS SULFUR AS IT CURES. Recall Details
Problem: ON CERTAIN PASSENGER VEHICLES EQUIPPED WITH THE QG18DE ENGINE OR QR25DE ENGINES, THE FOAM MATERIAL USED FOR THE INTERIOR LINING OF THE ELECTRONIC CONTROL MODULE (ECM) BOX EMITS SULFUR AS IT CURES. Recall Details
Problem: ON CERTAIN PASSENGER VEHICLES EQUIPPED WITH THE QG18DE ENGINE OR QR25DE ENGINES, THE FOAM MATERIAL USED FOR THE INTERIOR LINING OF THE ELECTRONIC CONTROL MODULE (ECM) BOX EMITS SULFUR AS IT CURES. Recall Details
Problem: ON CERTAIN PASSENGER VEHICLES EQUIPPED WITH THE QG18DE ENGINE OR QR25DE ENGINES, THE FOAM MATERIAL USED FOR THE INTERIOR LINING OF THE ELECTRONIC CONTROL MODULE (ECM) BOX EMITS SULFUR AS IT CURES. Recall Details
|