2000 NISSAN SENTRA RECALL - #01V277000
RECALL FOR WHEELS
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE COOLING HOLES IN THE STEEL WHEEL MAY HAVE BURRS ON THEIR EDGES AS A RESULT OF IMPROPER MANUFACTURING. THESE BURRS CAN CAUSE CRACKS AS THE VEHICLE IS BEING DRIVEN. CRACKS CAN PROPAGATE BETWEEN ADJACENT COOLING HOLES. IF ENOUGH CRACKS DEVELOP BETWEEN THE COOLING HOLES, THE WHEEL COULD FAIL AND SEPARATE FROM THE MOUNTING HUB WITHOUT PRIOR WARNING.
Information provided by the
National Highway Traffic Safety Administration.
•
Send to a friend
•
Hide Form
Recall Details
| Vehicle |
2000 NISSAN SENTRA |
|
| Manufacturer |
NISSAN NORTH AMERICA, INC. |
| Manufactured between |
2/1/2000 - 6/26/2001 |
| Recalled on |
9/6/2001 |
| Influenced by |
NISSAN NORTH AMERICA, INC. |
| Owners Notified on |
10/1/2001 |
| # Affected |
115,000 |
| Recalled for |
WHEELS |
|
|
| Description |
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE COOLING HOLES IN THE STEEL WHEEL MAY HAVE BURRS ON THEIR EDGES AS A RESULT OF IMPROPER MANUFACTURING. THESE BURRS CAN CAUSE CRACKS AS THE VEHICLE IS BEING DRIVEN. CRACKS CAN PROPAGATE BETWEEN ADJACENT COOLING HOLES. IF ENOUGH CRACKS DEVELOP BETWEEN THE COOLING HOLES, THE WHEEL COULD FAIL AND SEPARATE FROM THE MOUNTING HUB WITHOUT PRIOR WARNING. |
| Consequences |
SEPARATION OF THE WHEEL FROM THE VEHICLE WHILE BEING OPERATED COULD RESULT IN A VEHICLE CRASH. |
| Corrective action |
DEALERS WILL INSPECT FOR CRACKS AND REPLACE THE WHEEL IF CRACKS ARE DISCOVERED. OWNER NOTIFICATION WILL BE CONDUCTED IN TWO PHASES. THE FIRST MAILING BEGAN OCTOBER 1, 2001, ASKING OWNERS TO BRING THEIR VEHICLES IN TO A DEALER FOR INSPECTION OF THE WHEELS. ANY WHEELS WITH CRACKS WILL BE REPLACED. A SECOND OWNER NOTIFICATION WILL BEGIN IN EARLY DECEMBER, AT WHICH TIME NISSAN WILL HAVE AN ADEQUATE NUMBER OF REPLACEMENT WHEELS, REQUESTING OWNERS TO RETURN TO THEIR DEALERS TO HAVE THE WHEELS REPLACED. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT NISSAN AT 1-800-647-7261. |
| Notes |
ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236). |
| See also |
2000 NISSAN SENTRA Recall for SUSPENSION, FRONT, CONTROL ARM, LOWER ARM
2000 NISSAN SENTRA Recall for ENGINE AND ENGINE COOLING, ENGINE, GASOLINE
2000 NISSAN SENTRA Recall for ENGINE AND ENGINE COOLING
2000 NISSAN SENTRA Recall for ELECTRICAL SYSTEM, IGNITION, MODULE
2000 NISSAN SENTRA Recall for ENGINE AND ENGINE COOLING
|
| Technical Service Bulletins |
May 10, 2021 - 010000 STEERING
If YOU CONFIRM: A vehicle needs to have the brake rotors resurfaced (front or rear). ACTION: Use the ProCut PFM Series on-car brake lathe to perform brake rotor resurfacing and follow the tips listed in this bulletin. - The ProCut P
May 10, 2021 - 010000 STEERING
SERVICE INFORMATION - This bulletin is to assist you in responding to customer questions about brake operation, and provides diagnostic and repair information for each item listed, if any should occur. - Most brake incidents fall into
May 10, 2021 - 020000 SUSPENSION
SERVICE INFORMATION This bulletin provides information to identify: - A leaking strut or a shock absorber that qualifies for replacement under warranty. - A strut or shock absorber that has slight oil seepage, a condition wh
May 10, 2021 - 020000 SUSPENSION
SERVICE INFORMATION - This bulletin is to assist you in responding to customer questions about brake operation, and provides diagnostic and repair information for each item listed, if any should occur. - Most brake incidents fall into
May 10, 2021 - 030000 BRAKES (PWS)
If YOU CONFIRM: A vehicle needs to have the brake rotors resurfaced (front or rear). ACTION: Use the ProCut PFM Series on-car brake lathe to perform brake rotor resurfacing and follow the tips listed in this bulletin. - The ProCut P
View all Technical Service Bulletins
|
|
Comments
10/1/2010 - Terri Richter Reynolds
After reading further, I believe my 2000 Nissan Sentra GXE has been affected by the ECM box which is causing a crank problem/ and the dealer in Temple, TX does not care and will not fix this properly. Plese do what you can to help, or assist me in getting the dealer to take care of this issue.
10/1/2010 - Terri Richter Reynolds
I drive a 2000 Nissan Sentra with 127,000 miles on it . I have had a great deal of difficulty with the dealership in Temple, TX. Took this car to them with a crank problem. My mechanic said it was a sensor issue and the dealer should be able to fix it. Instead they charged me for a fuel pump, alternator and battery. Car still does not run well. They say it is not their fault and I need a new car. The IAC problem that Auto Zone ran a code on is still coming up. This is the same code that showed up when I took the car to them the first time. Please offer any help that you can.