2007 NISSAN SENTRA RECALL - #08V311000
RECALL FOR SERVICE BRAKES, HYDRAULIC : FOUNDATION COMPONENTS : MASTER CYLINDER
NISSAN IS RECALLING 169,202 MY 2007-2008 SENTRA PASSENGER VEHICLES EQUIPPED ROBERT BOSCH MASTER CYLINDER. DUE TO THE MACHINING IRREGULARITY BY THE SUPPLIER, THE INTERNAL SEAL GROOVE IN THE BODY OF SOME BRAKE MASTER CYLINDERS MAY ALLOW FOR A GAP IN THE GROOVE CONTACT AREA OF THE SEAL. THIS MAY RESULT IN BRAKE FLUID SLOWLY LEAKING FROM THE MASTER CYLINDER INTO THE BRAKE BOOSTER ASSEMBLY, CAUSING THE BRAKE WARNING LIGHT TO ILLUMINATE.
Information provided by the
National Highway Traffic Safety Administration.
•
Send to a friend
•
Hide Form
Recall Details
| Vehicle |
2007 NISSAN SENTRA |
|
| Manufacturer |
NISSAN NORTH AMERICA, INC. |
| Manufactured between |
1/1/2007 - 2/22/2008 |
| Recalled on |
7/11/2008 |
| Influenced by |
NISSAN NORTH AMERICA, INC. |
| Owners Notified on |
8/20/2008 |
| # Affected |
169,202 |
| Recalled for |
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER |
|
|
| Description |
NISSAN IS RECALLING 169,202 MY 2007-2008 SENTRA PASSENGER VEHICLES EQUIPPED ROBERT BOSCH MASTER CYLINDER. DUE TO THE MACHINING IRREGULARITY BY THE SUPPLIER, THE INTERNAL SEAL GROOVE IN THE BODY OF SOME BRAKE MASTER CYLINDERS MAY ALLOW FOR A GAP IN THE GROOVE CONTACT AREA OF THE SEAL. THIS MAY RESULT IN BRAKE FLUID SLOWLY LEAKING FROM THE MASTER CYLINDER INTO THE BRAKE BOOSTER ASSEMBLY, CAUSING THE BRAKE WARNING LIGHT TO ILLUMINATE. |
| Consequences |
IF THE WARNING LAMP IS IGNORED, ONE OF THE BRAKE CIRCUITS ON THE VEHICLE MAY NOT OPERATE AS DESIGNED INCREASING THE RISK OF A CRASH. |
| Corrective action |
DEALERS WILL INSPECT THE MASTER CYLINDER/BRAKE BOOSTER ASSEMBLY AND IF BRAKE FLUID LEAKAGE IS DETECTED, THE MASTER CYLINDER WILL BE REPLACED WITH A NEW ONE FREE OF CHARGE. THE RECALL BEGAN ON AUGUST 20, 2008. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261. |
| Notes |
CUSTOMERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV. |
| See also |
|
| Technical Service Bulletins |
May 10, 2021 - 010000 STEERING
If YOU CONFIRM: A vehicle needs to have the brake rotors resurfaced (front or rear). ACTION: Use the ProCut PFM Series on-car brake lathe to perform brake rotor resurfacing and follow the tips listed in this bulletin. - The ProCut P
May 10, 2021 - 010000 STEERING
SERVICE INFORMATION When servicing run flat tires or low profile tires: - Special equipment and procedures are required to avoid damage. - Specifically, Tire Pressure Monitor transmitters (TPMS sensors) can be damaged when imprope
May 10, 2021 - 010000 STEERING
SERVICE INFORMATION - This bulletin is to assist you in responding to customer questions about brake operation, and provides diagnostic and repair information for each item listed, if any should occur. - Most brake incidents fall into
May 10, 2021 - 010000 STEERING
SERVICE INFORMATION If you confirm there is a need to replace the steering wheel switches on an Applied Vehicle for any reason: - Do not replace the driver air bag module. The steering wheel switches are now available as a separate se
May 10, 2021 - 020000 SUSPENSION
SERVICE INFORMATION This bulletin provides information to identify: - A leaking strut or a shock absorber that qualifies for replacement under warranty. - A strut or shock absorber that has slight oil seepage, a condition wh
View all Technical Service Bulletins
|
|