by Volkswagen Group of America, Inc.
VW GOLF Recall for Equipment Problem - (11 Recalls Found)
Find your car listed below. Results are sorted year from newest to oldest. Select the desired vehicle to view the complete details.
Information provided by the National Highway Traffic Safety Administration.
|
|
|
Problem: Volkswagen Group of America, Inc. (Volkswagen) is recalling two 2018 Golf GTI vehicles. The VIN printed on the Federal Certification label may not match the actual VIN on the vehicle. As such, these vehicles fail to comply with the requirements of 49 CFR Part 567, "Certification." Recall Details
Problem: CERTAIN PASSENGER VEHICLES FAIL TO COMPLY WITH REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 225, "CHILD RESTRAINT ANCHORAGE SYSTEMS." CHILD SEAT ANCHORAGES INSTALLED IN THE VEHICLE'S REAR SEATS MUST BE IDENTIFIED BY MARKINGS, AND THEIR LOCATION AND USE BE DESCRIBED IN THE OWNER'S MANUAL. Recall Details
Problem: CERTAIN PASSENGER VEHICLES FAIL TO COMPLY WITH REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 225, "CHILD RESTRAINT ANCHORAGE SYSTEMS." CHILD SEAT ANCHORAGES INSTALLED IN THE VEHICLE'S REAR SEATS MUST BE IDENTIFIED BY MARKINGS, AND THEIR LOCATION AND USE BE DESCRIBED IN THE OWNER'S MANUAL. Recall Details
Problem: CERTAIN PASSENGER VEHICLES EQUIPPED WITH 2.8L VR6 ENGINES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS." THE RECOMMENDED COLD TIRE INFLATION PRESSURE PUBLISHED ON THE LABEL FOR TIRES OF THE SIZE 205/50 R15 86H IS 0.1 BAR (1.45 PSI) TOO LOW. IT SHOULD BE 2.5 BAR (36.3 PSI). THE LABEL RECOMMENDS 2.4 BAR (34.8 PSI = 35 PSI). Recall Details
Problem: CERTAIN PASSENGER VEHICLES EQUIPPED WITH 2.8L VR6 ENGINES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS." THE RECOMMENDED COLD TIRE INFLATION PRESSURE PUBLISHED ON THE LABEL FOR TIRES OF THE SIZE 205/50 R15 86H IS 0.1 BAR (1.45 PSI) TOO LOW. IT SHOULD BE 2.5 BAR (36.3 PSI). THE LABEL RECOMMENDS 2.4 BAR (34.8 PSI = 35 PSI). Recall Details
Problem: THE JACKS SUPPLIED WITH THESE VEHICLES WERE ASSEMBLED WITH AN IMPROPERLY MACHINED SPINDLE, SO THAT A SHARP RIDGE ON THE EDGE OF SPINDLE'S THREAD WOULD HAVE REMAINED. Recall Details
Problem: THE JACKS SUPPLIED WITH THESE VEHICLES WERE ASSEMBLED WITH AN IMPROPERLY MACHINED SPINDLE, SO THAT A SHARP RIDGE ON THE EDGE OF SPINDLE'S THREAD WOULD HAVE REMAINED. Recall Details
Problem: THE JACKS SUPPLIED WITH THESE VEHICLES WERE ASSEMBLED WITH AN IMPROPERLY MACHINED SPINDLE, SO THAT A SHARP RIDGE ON THE EDGE OF SPINDLE'S THREAD WOULD HAVE REMAINED. Recall Details
Problem: THE JACKS SUPPLIED WITH THESE VEHICLES WERE ASSEMBLED WITH AN IMPROPERLY MACHINED SPINDLE, SO THAT A SHARP RIDGE ON THE EDGE OF SPINDLE'S THREAD WOULD HAVE REMAINED. Recall Details
Problem: THE JACKS SUPPLIED WITH THESE VEHICLES WERE ASSEMBLED WITH AN IMPROPERLY MACHINED SPINDLE, SO THAT A SHARP RIDGE ON THE EDGE OF SPINDLE'S THREAD WOULD HAVE REMAINED. Recall Details
Problem: THE JACKS SUPPLIED WITH THESE VEHICLES WERE ASSEMBLED WITH AN IMPROPERLY MACHINED SPINDLE, SO THAT A SHARP RIDGE ON THE EDGE OF SPINDLE'S THREAD WOULD HAVE REMAINED. Recall Details
|