CRANE COE Recalls - View the latest CRANE COE Recalls from the NHTSA

Auto Recalls For Consumers

Car Recalls

Tire Recalls

Motorcycle Recalls

RV Recalls

Commercial Vehicles

Child Car Seats

Complaints

Search

|

Alerts

CRANE COE RECALLS - (31 Recalls Found)

Find your vehicle listed below. Results are sorted year from newest to oldest. Select the desired vehicle to view the complete details. Information provided by the National Highway Traffic Safety Administration.

---

2015 CRANE COE Recall - ENGINE AND ENGINE COOLING:ENGINE Problem: Crane Carrier Company (Crane Carrier) is recalling certain model year 2008-2015 COE, LDT2, and LET2 trucks manufactured February 25, 2008, to May 20, 2015, and equipped with certain Cummins Westport ISL G engines. Excessive engine crankcase pressures may cause the 90-degree elbow of the vent tube assembly to detach from the crankcase ventilation breather, possibly allowing engine oil to come into contact with hot surfaces. Recall Details 2014 CRANE COE Recall - ENGINE AND ENGINE COOLING:ENGINE Problem: Crane Carrier Company (Crane) is recalling certain model year 2008-2014 LET2, COE, LDT2, and LE2 refuse vehicles manufactured April 16, 2008, through February 28, 2014, and equipped with certain Cummins Westport Model ISL G engines. Condensation in the intake manifold may freeze during cold weather conditions and interfere with the proper operation of the intake manifold pressure sensor. Recall Details 2014 CRANE COE Recall - ENGINE AND ENGINE COOLING:ENGINE Problem: Crane Carrier Company (Crane Carrier) is recalling certain model year 2008-2015 COE, LDT2, and LET2 trucks manufactured February 25, 2008, to May 20, 2015, and equipped with certain Cummins Westport ISL G engines. Excessive engine crankcase pressures may cause the 90-degree elbow of the vent tube assembly to detach from the crankcase ventilation breather, possibly allowing engine oil to come into contact with hot surfaces. Recall Details 2013 CRANE COE Recall - ENGINE AND ENGINE COOLING:ENGINE Problem: Crane Carrier Company (Crane Carrier) is recalling certain model year 2008-2015 COE, LDT2, and LET2 trucks manufactured February 25, 2008, to May 20, 2015, and equipped with certain Cummins Westport ISL G engines. Excessive engine crankcase pressures may cause the 90-degree elbow of the vent tube assembly to detach from the crankcase ventilation breather, possibly allowing engine oil to come into contact with hot surfaces. Recall Details 2013 CRANE COE Recall - ENGINE AND ENGINE COOLING:ENGINE Problem: Crane Carrier Company (Crane) is recalling certain model year 2008-2014 LET2, COE, LDT2, and LE2 refuse vehicles manufactured April 16, 2008, through February 28, 2014, and equipped with certain Cummins Westport Model ISL G engines. Condensation in the intake manifold may freeze during cold weather conditions and interfere with the proper operation of the intake manifold pressure sensor. Recall Details 2012 CRANE COE Recall - ENGINE AND ENGINE COOLING:ENGINE Problem: Crane Carrier Company (Crane) is recalling certain model year 2008-2014 LET2, COE, LDT2, and LE2 refuse vehicles manufactured April 16, 2008, through February 28, 2014, and equipped with certain Cummins Westport Model ISL G engines. Condensation in the intake manifold may freeze during cold weather conditions and interfere with the proper operation of the intake manifold pressure sensor. Recall Details 2012 CRANE COE Recall - ENGINE AND ENGINE COOLING:ENGINE Problem: Crane Carrier Company (Crane Carrier) is recalling certain model year 2008-2015 COE, LDT2, and LET2 trucks manufactured February 25, 2008, to May 20, 2015, and equipped with certain Cummins Westport ISL G engines. Excessive engine crankcase pressures may cause the 90-degree elbow of the vent tube assembly to detach from the crankcase ventilation breather, possibly allowing engine oil to come into contact with hot surfaces. Recall Details 2011 CRANE COE Recall - ENGINE AND ENGINE COOLING:ENGINE Problem: Crane Carrier Company (Crane Carrier) is recalling certain model year 2008-2015 COE, LDT2, and LET2 trucks manufactured February 25, 2008, to May 20, 2015, and equipped with certain Cummins Westport ISL G engines. Excessive engine crankcase pressures may cause the 90-degree elbow of the vent tube assembly to detach from the crankcase ventilation breather, possibly allowing engine oil to come into contact with hot surfaces. Recall Details 2011 CRANE COE Recall - ENGINE AND ENGINE COOLING:ENGINE Problem: Crane Carrier Company (Crane) is recalling certain model year 2008-2014 LET2, COE, LDT2, and LE2 refuse vehicles manufactured April 16, 2008, through February 28, 2014, and equipped with certain Cummins Westport Model ISL G engines. Condensation in the intake manifold may freeze during cold weather conditions and interfere with the proper operation of the intake manifold pressure sensor. Recall Details 2010 CRANE COE Recall - ENGINE AND ENGINE COOLING:ENGINE Problem: Crane Carrier Company (Crane) is recalling certain model year 2008-2014 LET2, COE, LDT2, and LE2 refuse vehicles manufactured April 16, 2008, through February 28, 2014, and equipped with certain Cummins Westport Model ISL G engines. Condensation in the intake manifold may freeze during cold weather conditions and interfere with the proper operation of the intake manifold pressure sensor. Recall Details 2010 CRANE COE Recall - ENGINE AND ENGINE COOLING:ENGINE Problem: Crane Carrier Company (Crane Carrier) is recalling certain model year 2008-2015 COE, LDT2, and LET2 trucks manufactured February 25, 2008, to May 20, 2015, and equipped with certain Cummins Westport ISL G engines. Excessive engine crankcase pressures may cause the 90-degree elbow of the vent tube assembly to detach from the crankcase ventilation breather, possibly allowing engine oil to come into contact with hot surfaces. Recall Details 2009 CRANE COE Recall - ENGINE AND ENGINE COOLING:ENGINE Problem: Crane Carrier Company (Crane Carrier) is recalling certain model year 2008-2015 COE, LDT2, and LET2 trucks manufactured February 25, 2008, to May 20, 2015, and equipped with certain Cummins Westport ISL G engines. Excessive engine crankcase pressures may cause the 90-degree elbow of the vent tube assembly to detach from the crankcase ventilation breather, possibly allowing engine oil to come into contact with hot surfaces. Recall Details 2009 CRANE COE Recall - ENGINE AND ENGINE COOLING:ENGINE Problem: Crane Carrier Company (Crane) is recalling certain model year 2008-2014 LET2, COE, LDT2, and LE2 refuse vehicles manufactured April 16, 2008, through February 28, 2014, and equipped with certain Cummins Westport Model ISL G engines. Condensation in the intake manifold may freeze during cold weather conditions and interfere with the proper operation of the intake manifold pressure sensor. Recall Details 2008 CRANE COE Recall - ENGINE AND ENGINE COOLING:ENGINE Problem: Crane Carrier Company (Crane) is recalling certain model year 2008-2014 LET2, COE, LDT2, and LE2 refuse vehicles manufactured April 16, 2008, through February 28, 2014, and equipped with certain Cummins Westport Model ISL G engines. Condensation in the intake manifold may freeze during cold weather conditions and interfere with the proper operation of the intake manifold pressure sensor. Recall Details 2008 CRANE COE Recall - ENGINE AND ENGINE COOLING:ENGINE Problem: Crane Carrier Company (Crane Carrier) is recalling certain model year 2008-2015 COE, LDT2, and LET2 trucks manufactured February 25, 2008, to May 20, 2015, and equipped with certain Cummins Westport ISL G engines. Excessive engine crankcase pressures may cause the 90-degree elbow of the vent tube assembly to detach from the crankcase ventilation breather, possibly allowing engine oil to come into contact with hot surfaces. Recall Details 2003 CRANE COE Recall - SERVICE BRAKES, AIR:SLACK ADJUSTERS:AUTOMATIC Problem: ON CERTAIN TRAILERS EQUIPPED WITH A SPECIFIC COMBINATION OF REYCO SUSPENSION, EATON DRIVE AXLE, AND BENDIX SLACK ADJUSTERS, THE FAILURE OF A DRIVE AXLE SLACK ADJUSTER TO AUTOMATICALLY ADJUST AS REQUIRED TO COMPENSATE FOR BRAKE WEAR, WILL CAUSE AN OUT OF ADJUSTMENT CONDITION. IF THIS CONDITION OCCURS AND IS NOT IDENTIFIED AND CORRECTED THROUGH NORMAL INSPECTIONS AND MAINTENANCE, THE SLACK ADJUSTER WILL OVER-ROTATE AND MAY CONTACT THE SUSPENSION LOWER SPRING SADDLE.  Recall Details 2002 CRANE COE Recall - SERVICE BRAKES, AIR:SLACK ADJUSTERS:AUTOMATIC Problem: ON CERTAIN TRAILERS EQUIPPED WITH A SPECIFIC COMBINATION OF REYCO SUSPENSION, EATON DRIVE AXLE, AND BENDIX SLACK ADJUSTERS, THE FAILURE OF A DRIVE AXLE SLACK ADJUSTER TO AUTOMATICALLY ADJUST AS REQUIRED TO COMPENSATE FOR BRAKE WEAR, WILL CAUSE AN OUT OF ADJUSTMENT CONDITION. IF THIS CONDITION OCCURS AND IS NOT IDENTIFIED AND CORRECTED THROUGH NORMAL INSPECTIONS AND MAINTENANCE, THE SLACK ADJUSTER WILL OVER-ROTATE AND MAY CONTACT THE SUSPENSION LOWER SPRING SADDLE.  Recall Details 2002 CRANE COE Recall - EQUIPMENT:OTHER:LABELS Problem: ON CERTAIN TAG AND PUSHER AXLE ASSEMBLIES PURCHASED FROM RIDEWELL, THE AXLE ASSEMBLIES HAVE AN ACTUAL WEIGHT RATING LESS THAN THAT SPECIFIED ON THE LABEL AND THEREFORE FAIL TO COMPLY WITH THE REQUIREMENTS OF PART 567.5, "CERTIFICATION." Recall Details 2001 CRANE COE Recall - EQUIPMENT:OTHER:LABELS Problem: ON CERTAIN TAG AND PUSHER AXLE ASSEMBLIES PURCHASED FROM RIDEWELL, THE AXLE ASSEMBLIES HAVE AN ACTUAL WEIGHT RATING LESS THAN THAT SPECIFIED ON THE LABEL AND THEREFORE FAIL TO COMPLY WITH THE REQUIREMENTS OF PART 567.5, "CERTIFICATION." Recall Details 2001 CRANE COE Recall - SERVICE BRAKES, AIR:SLACK ADJUSTERS:AUTOMATIC Problem: ON CERTAIN TRAILERS EQUIPPED WITH A SPECIFIC COMBINATION OF REYCO SUSPENSION, EATON DRIVE AXLE, AND BENDIX SLACK ADJUSTERS, THE FAILURE OF A DRIVE AXLE SLACK ADJUSTER TO AUTOMATICALLY ADJUST AS REQUIRED TO COMPENSATE FOR BRAKE WEAR, WILL CAUSE AN OUT OF ADJUSTMENT CONDITION. IF THIS CONDITION OCCURS AND IS NOT IDENTIFIED AND CORRECTED THROUGH NORMAL INSPECTIONS AND MAINTENANCE, THE SLACK ADJUSTER WILL OVER-ROTATE AND MAY CONTACT THE SUSPENSION LOWER SPRING SADDLE.  Recall Details 2001 CRANE COE Recall - SERVICE BRAKES, AIR Problem: CRANE CARRIER IS RECALLING 672 MY 1999-2001 COE,MY 1999-2002 LDT, MY 2001-2007 LDT2, MY 1998-2003 LET, AND MY 2001-2007 LET2 REFUSE CAB AND CHASSIS FOR FAILING TO COMPLY WITH THE BRAKE RELEASE TIMING REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, "AIR BRAKE SYSTEMS." THE BRAKE RELEASE TIMING WAS SLOWER THAN REQUIRED.  Recall Details 2000 CRANE COE Recall - SERVICE BRAKES, AIR Problem: CRANE CARRIER IS RECALLING 672 MY 1999-2001 COE,MY 1999-2002 LDT, MY 2001-2007 LDT2, MY 1998-2003 LET, AND MY 2001-2007 LET2 REFUSE CAB AND CHASSIS FOR FAILING TO COMPLY WITH THE BRAKE RELEASE TIMING REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, "AIR BRAKE SYSTEMS." THE BRAKE RELEASE TIMING WAS SLOWER THAN REQUIRED.  Recall Details 2000 CRANE COE Recall - SERVICE BRAKES, AIR:SLACK ADJUSTERS:AUTOMATIC Problem: ON CERTAIN TRAILERS EQUIPPED WITH A SPECIFIC COMBINATION OF REYCO SUSPENSION, EATON DRIVE AXLE, AND BENDIX SLACK ADJUSTERS, THE FAILURE OF A DRIVE AXLE SLACK ADJUSTER TO AUTOMATICALLY ADJUST AS REQUIRED TO COMPENSATE FOR BRAKE WEAR, WILL CAUSE AN OUT OF ADJUSTMENT CONDITION. IF THIS CONDITION OCCURS AND IS NOT IDENTIFIED AND CORRECTED THROUGH NORMAL INSPECTIONS AND MAINTENANCE, THE SLACK ADJUSTER WILL OVER-ROTATE AND MAY CONTACT THE SUSPENSION LOWER SPRING SADDLE.  Recall Details 2000 CRANE COE Recall - EQUIPMENT:OTHER:LABELS Problem: ON CERTAIN TAG AND PUSHER AXLE ASSEMBLIES PURCHASED FROM RIDEWELL, THE AXLE ASSEMBLIES HAVE AN ACTUAL WEIGHT RATING LESS THAN THAT SPECIFIED ON THE LABEL AND THEREFORE FAIL TO COMPLY WITH THE REQUIREMENTS OF PART 567.5, "CERTIFICATION." Recall Details 1999 CRANE COE Recall - EQUIPMENT:OTHER:LABELS Problem: ON CERTAIN TAG AND PUSHER AXLE ASSEMBLIES PURCHASED FROM RIDEWELL, THE AXLE ASSEMBLIES HAVE AN ACTUAL WEIGHT RATING LESS THAN THAT SPECIFIED ON THE LABEL AND THEREFORE FAIL TO COMPLY WITH THE REQUIREMENTS OF PART 567.5, "CERTIFICATION." Recall Details 1999 CRANE COE Recall - SERVICE BRAKES, AIR Problem: CRANE CARRIER IS RECALLING 672 MY 1999-2001 COE,MY 1999-2002 LDT, MY 2001-2007 LDT2, MY 1998-2003 LET, AND MY 2001-2007 LET2 REFUSE CAB AND CHASSIS FOR FAILING TO COMPLY WITH THE BRAKE RELEASE TIMING REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, "AIR BRAKE SYSTEMS." THE BRAKE RELEASE TIMING WAS SLOWER THAN REQUIRED.  Recall Details 1998 CRANE COE Recall - EQUIPMENT:OTHER:LABELS Problem: ON CERTAIN TAG AND PUSHER AXLE ASSEMBLIES PURCHASED FROM RIDEWELL, THE AXLE ASSEMBLIES HAVE AN ACTUAL WEIGHT RATING LESS THAN THAT SPECIFIED ON THE LABEL AND THEREFORE FAIL TO COMPLY WITH THE REQUIREMENTS OF PART 567.5, "CERTIFICATION." Recall Details 1997 CRANE COE Recall - EQUIPMENT:OTHER:LABELS Problem: ON CERTAIN TAG AND PUSHER AXLE ASSEMBLIES PURCHASED FROM RIDEWELL, THE AXLE ASSEMBLIES HAVE AN ACTUAL WEIGHT RATING LESS THAN THAT SPECIFIED ON THE LABEL AND THEREFORE FAIL TO COMPLY WITH THE REQUIREMENTS OF PART 567.5, "CERTIFICATION." Recall Details 1997 CRANE COE Recall - VEHICLE SPEED CONTROL Problem: ON CERTAIN HEAVY DUTY TRUCKS EQUIPPED WITH CUMMINS C8.3G AND L10G ELECTRONIC CONTROL MODULES (ECM), THE ECM DOES NOT HAVE THE ABILITY TO DETECT A THROTTLE FAIL-SAFE ENGINE SHUTDOWN COMMAND. THIS COULD RESULT IN AN UNANTICIPATED, UNCOMMANDED OPEN THROTTLE CONDITION WITHOUT WARNING.  Recall Details 1997 CRANE COE Recall - FUEL SYSTEM, OTHER:STORAGE:TANK ASSEMBLY:PRESSURE RELIEF DEVICES Problem: CERTAIN TRUCKS EQUIPPED WITH NEXGEN LIQUID NATURAL GAS (LNG) TANKS ARE BEING RECALLED. THE INTRODUCTION OF WATER INTO THE DISCHARGE SIDE OF BOTH THE PRIMARY AND SECONDARY RELIEF VALVES SIMULTANEOUSLY AND SUBSEQUENT FREEZING IN SERVICE CAN RENDER THE VALVES TEMPORARILY INOPERATIVE.  Recall Details 1996 CRANE COE Recall - EQUIPMENT:OTHER:LABELS Problem: ON CERTAIN TAG AND PUSHER AXLE ASSEMBLIES PURCHASED FROM RIDEWELL, THE AXLE ASSEMBLIES HAVE AN ACTUAL WEIGHT RATING LESS THAN THAT SPECIFIED ON THE LABEL AND THEREFORE FAIL TO COMPLY WITH THE REQUIREMENTS OF PART 567.5, "CERTIFICATION." Recall Details