|
Problem: Crane Carrier Company (Crane Carrier) is recalling certain model year 2008-2015 COE, LDT2, and LET2 trucks manufactured February 25, 2008, to May 20, 2015, and equipped with certain Cummins Westport ISL G engines. Excessive engine crankcase pressures may cause the 90-degree elbow of the vent tube assembly to detach from the crankcase ventilation breather, possibly allowing engine oil to come into contact with hot surfaces. Recall Details
Problem: Crane Carrier Company (Crane Carrier) is recalling certain model year 2008-2015 COE, LDT2, and LET2 trucks manufactured February 25, 2008, to May 20, 2015, and equipped with certain Cummins Westport ISL G engines. Excessive engine crankcase pressures may cause the 90-degree elbow of the vent tube assembly to detach from the crankcase ventilation breather, possibly allowing engine oil to come into contact with hot surfaces. Recall Details
Problem: Crane Carrier Company (Crane) is recalling certain model year 2008-2014 LET2, COE, LDT2, and LE2 refuse vehicles manufactured April 16, 2008, through February 28, 2014, and equipped with certain Cummins Westport Model ISL G engines. Condensation in the intake manifold may freeze during cold weather conditions and interfere with the proper operation of the intake manifold pressure sensor. Recall Details
Problem: Crane Carrier Company (Crane) is recalling certain model year 2013 LET2 and LDT2 vehicles manufactured June 30, 2014, to July 31, 2014. The Cummins ISB or ISL engines in these vehicles may have been equipped with Fleetguard UFF-XT fuel filters, part number FF63009, whose filter shell may separate from the fuel filter nut plate causing the engine to stall without warning. Recall Details
Problem: Crane Carrier Company (Crane Carrier) is recalling certain model year 2008-2015 COE, LDT2, and LET2 trucks manufactured February 25, 2008, to May 20, 2015, and equipped with certain Cummins Westport ISL G engines. Excessive engine crankcase pressures may cause the 90-degree elbow of the vent tube assembly to detach from the crankcase ventilation breather, possibly allowing engine oil to come into contact with hot surfaces. Recall Details
Problem: Crane Carrier Company (Crane) is recalling certain model year 2008-2014 LET2, COE, LDT2, and LE2 refuse vehicles manufactured April 16, 2008, through February 28, 2014, and equipped with certain Cummins Westport Model ISL G engines. Condensation in the intake manifold may freeze during cold weather conditions and interfere with the proper operation of the intake manifold pressure sensor. Recall Details
Problem: Crane Carrier Company (Crane Carrier) is recalling certain model year 2008-2015 COE, LDT2, and LET2 trucks manufactured February 25, 2008, to May 20, 2015, and equipped with certain Cummins Westport ISL G engines. Excessive engine crankcase pressures may cause the 90-degree elbow of the vent tube assembly to detach from the crankcase ventilation breather, possibly allowing engine oil to come into contact with hot surfaces. Recall Details
Problem: Crane Carrier Company (Crane) is recalling certain model year 2008-2014 LET2, COE, LDT2, and LE2 refuse vehicles manufactured April 16, 2008, through February 28, 2014, and equipped with certain Cummins Westport Model ISL G engines. Condensation in the intake manifold may freeze during cold weather conditions and interfere with the proper operation of the intake manifold pressure sensor. Recall Details
Problem: Crane Carrier Company (Crane) is recalling certain model year 2008-2014 LET2, COE, LDT2, and LE2 refuse vehicles manufactured April 16, 2008, through February 28, 2014, and equipped with certain Cummins Westport Model ISL G engines. Condensation in the intake manifold may freeze during cold weather conditions and interfere with the proper operation of the intake manifold pressure sensor. Recall Details
Problem: Crane Carrier Company (Crane Carrier) is recalling certain model year 2008-2015 COE, LDT2, and LET2 trucks manufactured February 25, 2008, to May 20, 2015, and equipped with certain Cummins Westport ISL G engines. Excessive engine crankcase pressures may cause the 90-degree elbow of the vent tube assembly to detach from the crankcase ventilation breather, possibly allowing engine oil to come into contact with hot surfaces. Recall Details
Problem: Crane Carrier Company (Crane Carrier) is recalling certain model year 2008-2015 COE, LDT2, and LET2 trucks manufactured February 25, 2008, to May 20, 2015, and equipped with certain Cummins Westport ISL G engines. Excessive engine crankcase pressures may cause the 90-degree elbow of the vent tube assembly to detach from the crankcase ventilation breather, possibly allowing engine oil to come into contact with hot surfaces. Recall Details
Problem: CRANE CARRIER IS RECALLING CERTAIN MODEL YEAR 2010-2011DR, LET2,OET, WS, AND MODEL YEAR 2010 LDT2 CAB AND CHASSIS UTILITY VEHICLES MANUFACTURED FROM OCTOBER 26, 2010, THROUGH MARCH 18, 2011 AND EQUIPPED WITH GUNITE AUTOMATIC AIR BRAKE SLACK ADJUSTERS. DUE TO AN INCOMPLETE "KNITTING" OF THE IRON AT THE TIME OF CASTING, INADEQUATE STRUCTURAL INTEGRITY OF THE SLACK ADJUSTER HOUSING CAN OCCUR, WHICH COULD CAUSE THE HOUSING TO BREAK AT THE HANDLE UNDER NORMAL OPERATING LOADS. Recall Details
Problem: Crane Carrier Company (Crane) is recalling certain model year 2008-2014 LET2, COE, LDT2, and LE2 refuse vehicles manufactured April 16, 2008, through February 28, 2014, and equipped with certain Cummins Westport Model ISL G engines. Condensation in the intake manifold may freeze during cold weather conditions and interfere with the proper operation of the intake manifold pressure sensor. Recall Details
Problem: Crane Carrier Company (Crane) is recalling certain model year 2008-2014 LET2, COE, LDT2, and LE2 refuse vehicles manufactured April 16, 2008, through February 28, 2014, and equipped with certain Cummins Westport Model ISL G engines. Condensation in the intake manifold may freeze during cold weather conditions and interfere with the proper operation of the intake manifold pressure sensor. Recall Details
Problem: Crane Carrier Company (Crane Carrier) is recalling certain model year 2008-2015 COE, LDT2, and LET2 trucks manufactured February 25, 2008, to May 20, 2015, and equipped with certain Cummins Westport ISL G engines. Excessive engine crankcase pressures may cause the 90-degree elbow of the vent tube assembly to detach from the crankcase ventilation breather, possibly allowing engine oil to come into contact with hot surfaces. Recall Details
Problem: Crane Carrier Company (Crane Carrier) is recalling certain model year 2008-2015 COE, LDT2, and LET2 trucks manufactured February 25, 2008, to May 20, 2015, and equipped with certain Cummins Westport ISL G engines. Excessive engine crankcase pressures may cause the 90-degree elbow of the vent tube assembly to detach from the crankcase ventilation breather, possibly allowing engine oil to come into contact with hot surfaces. Recall Details
Problem: Crane Carrier Company (Crane) is recalling certain model year 2008-2014 LET2, COE, LDT2, and LE2 refuse vehicles manufactured April 16, 2008, through February 28, 2014, and equipped with certain Cummins Westport Model ISL G engines. Condensation in the intake manifold may freeze during cold weather conditions and interfere with the proper operation of the intake manifold pressure sensor. Recall Details
Problem: CRANE CARRIER IS RECALLING 672 MY 1999-2001 COE,MY 1999-2002 LDT, MY 2001-2007 LDT2, MY 1998-2003 LET, AND MY 2001-2007 LET2 REFUSE CAB AND CHASSIS FOR FAILING TO COMPLY WITH THE BRAKE RELEASE TIMING REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, "AIR BRAKE SYSTEMS." THE BRAKE RELEASE TIMING WAS SLOWER THAN REQUIRED. Recall Details
Problem: CRANE CARRIER IS RECALLING 16 MY 2007-2008 LDT2 AND LET2 REFUSE PACKERVEHICLES EQUIPPED WITH C7 OR C9 CATERPILLAR DIESEL ENGINES. THE FUEL PUMP OUTLET CHECK PLUG MAY BE CRACKED WHICH COULD CAUSE FUEL TO SPRAY AND LEAK. Recall Details
Problem: CRANE CARRIER IS RECALLING CERTAIN VEHICLES EQUIPPED WITH CATERPILLAR C13 DIESEL ENGINES. THE EXTENSION PIPES ATTACHED TO THE AFTERTREATMENT REGENERATION DEVICE (ARD) MAY DEVELOP A HOLE, AND HEAT AND FLAME MAY ESCAPE DURING A REGENERATION OF THE DIESEL PARTICULATE FILTER. Recall Details
Problem: CRANE CARRIER IS RECALLING 672 MY 1999-2001 COE,MY 1999-2002 LDT, MY 2001-2007 LDT2, MY 1998-2003 LET, AND MY 2001-2007 LET2 REFUSE CAB AND CHASSIS FOR FAILING TO COMPLY WITH THE BRAKE RELEASE TIMING REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, "AIR BRAKE SYSTEMS." THE BRAKE RELEASE TIMING WAS SLOWER THAN REQUIRED. Recall Details
Problem: CRANE CARRIER IS RECALLING 672 MY 1999-2001 COE,MY 1999-2002 LDT, MY 2001-2007 LDT2, MY 1998-2003 LET, AND MY 2001-2007 LET2 REFUSE CAB AND CHASSIS FOR FAILING TO COMPLY WITH THE BRAKE RELEASE TIMING REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, "AIR BRAKE SYSTEMS." THE BRAKE RELEASE TIMING WAS SLOWER THAN REQUIRED. Recall Details
Problem: ON CERTAIN VEHICLES, A MECHANICAL INTERFERENCE MAY EXIST BETWEEN THE THROTTLE PEDAL AND AN ACCESS PLUG IN THE CAB SHEET METAL. Recall Details
Problem: ON CERTAIN CAB AND CHASSIS READY-MIX, HAY HAULER, REFUSE AND WELL SERVICE VEHICLES, THERE MAY BE MATERIAL FLAWS IN THE DRAG LINK ASSEMBLIES. Recall Details
Problem: ON CERTAIN VEHICLES EQUIPPED WITH GALAXY DISC TRUCK WHEELS, SIZE 22.5" X 9", A FAILURE OF THESE WHEELS CAN OCCUR. Recall Details
Problem: CRANE CARRIER IS RECALLING 672 MY 1999-2001 COE,MY 1999-2002 LDT, MY 2001-2007 LDT2, MY 1998-2003 LET, AND MY 2001-2007 LET2 REFUSE CAB AND CHASSIS FOR FAILING TO COMPLY WITH THE BRAKE RELEASE TIMING REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, "AIR BRAKE SYSTEMS." THE BRAKE RELEASE TIMING WAS SLOWER THAN REQUIRED. Recall Details
Problem: CRANE CARRIER IS RECALLING 672 MY 1999-2001 COE,MY 1999-2002 LDT, MY 2001-2007 LDT2, MY 1998-2003 LET, AND MY 2001-2007 LET2 REFUSE CAB AND CHASSIS FOR FAILING TO COMPLY WITH THE BRAKE RELEASE TIMING REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, "AIR BRAKE SYSTEMS." THE BRAKE RELEASE TIMING WAS SLOWER THAN REQUIRED. Recall Details
Problem: ON CERTAIN TRAILERS EQUIPPED WITH A SPECIFIC COMBINATION OF REYCO SUSPENSION, EATON DRIVE AXLE, AND BENDIX SLACK ADJUSTERS, THE FAILURE OF A DRIVE AXLE SLACK ADJUSTER TO AUTOMATICALLY ADJUST AS REQUIRED TO COMPENSATE FOR BRAKE WEAR, WILL CAUSE AN OUT OF ADJUSTMENT CONDITION. IF THIS CONDITION OCCURS AND IS NOT IDENTIFIED AND CORRECTED THROUGH NORMAL INSPECTIONS AND MAINTENANCE, THE SLACK ADJUSTER WILL OVER-ROTATE AND MAY CONTACT THE SUSPENSION LOWER SPRING SADDLE. Recall Details
Problem: ON CERTAIN VEHICLES EQUIPPED WITH GALAXY DISC TRUCK WHEELS, SIZE 22.5" X 9", A FAILURE OF THESE WHEELS CAN OCCUR. Recall Details
Problem: ON CERTAIN TRAILERS EQUIPPED WITH A SPECIFIC COMBINATION OF REYCO SUSPENSION, EATON DRIVE AXLE, AND BENDIX SLACK ADJUSTERS, THE FAILURE OF A DRIVE AXLE SLACK ADJUSTER TO AUTOMATICALLY ADJUST AS REQUIRED TO COMPENSATE FOR BRAKE WEAR, WILL CAUSE AN OUT OF ADJUSTMENT CONDITION. IF THIS CONDITION OCCURS AND IS NOT IDENTIFIED AND CORRECTED THROUGH NORMAL INSPECTIONS AND MAINTENANCE, THE SLACK ADJUSTER WILL OVER-ROTATE AND MAY CONTACT THE SUSPENSION LOWER SPRING SADDLE. Recall Details
Problem: CRANE CARRIER IS RECALLING 672 MY 1999-2001 COE,MY 1999-2002 LDT, MY 2001-2007 LDT2, MY 1998-2003 LET, AND MY 2001-2007 LET2 REFUSE CAB AND CHASSIS FOR FAILING TO COMPLY WITH THE BRAKE RELEASE TIMING REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, "AIR BRAKE SYSTEMS." THE BRAKE RELEASE TIMING WAS SLOWER THAN REQUIRED. Recall Details
Problem: ON CERTAIN TAG AND PUSHER AXLE ASSEMBLIES PURCHASED FROM RIDEWELL, THE AXLE ASSEMBLIES HAVE AN ACTUAL WEIGHT RATING LESS THAN THAT SPECIFIED ON THE LABEL AND THEREFORE FAIL TO COMPLY WITH THE REQUIREMENTS OF PART 567.5, "CERTIFICATION." Recall Details
Problem: ON CERTAIN TAG AND PUSHER AXLE ASSEMBLIES PURCHASED FROM RIDEWELL, THE AXLE ASSEMBLIES HAVE AN ACTUAL WEIGHT RATING LESS THAN THAT SPECIFIED ON THE LABEL AND THEREFORE FAIL TO COMPLY WITH THE REQUIREMENTS OF PART 567.5, "CERTIFICATION." Recall Details
Problem: CRANE CARRIER IS RECALLING 672 MY 1999-2001 COE,MY 1999-2002 LDT, MY 2001-2007 LDT2, MY 1998-2003 LET, AND MY 2001-2007 LET2 REFUSE CAB AND CHASSIS FOR FAILING TO COMPLY WITH THE BRAKE RELEASE TIMING REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, "AIR BRAKE SYSTEMS." THE BRAKE RELEASE TIMING WAS SLOWER THAN REQUIRED. Recall Details
Problem: ON CERTAIN TRAILERS EQUIPPED WITH A SPECIFIC COMBINATION OF REYCO SUSPENSION, EATON DRIVE AXLE, AND BENDIX SLACK ADJUSTERS, THE FAILURE OF A DRIVE AXLE SLACK ADJUSTER TO AUTOMATICALLY ADJUST AS REQUIRED TO COMPENSATE FOR BRAKE WEAR, WILL CAUSE AN OUT OF ADJUSTMENT CONDITION. IF THIS CONDITION OCCURS AND IS NOT IDENTIFIED AND CORRECTED THROUGH NORMAL INSPECTIONS AND MAINTENANCE, THE SLACK ADJUSTER WILL OVER-ROTATE AND MAY CONTACT THE SUSPENSION LOWER SPRING SADDLE. Recall Details
Problem: ON CERTAIN TAG AND PUSHER AXLE ASSEMBLIES PURCHASED FROM RIDEWELL, THE AXLE ASSEMBLIES HAVE AN ACTUAL WEIGHT RATING LESS THAN THAT SPECIFIED ON THE LABEL AND THEREFORE FAIL TO COMPLY WITH THE REQUIREMENTS OF PART 567.5, "CERTIFICATION." Recall Details
Problem: ON CERTAIN TRAILERS EQUIPPED WITH A SPECIFIC COMBINATION OF REYCO SUSPENSION, EATON DRIVE AXLE, AND BENDIX SLACK ADJUSTERS, THE FAILURE OF A DRIVE AXLE SLACK ADJUSTER TO AUTOMATICALLY ADJUST AS REQUIRED TO COMPENSATE FOR BRAKE WEAR, WILL CAUSE AN OUT OF ADJUSTMENT CONDITION. IF THIS CONDITION OCCURS AND IS NOT IDENTIFIED AND CORRECTED THROUGH NORMAL INSPECTIONS AND MAINTENANCE, THE SLACK ADJUSTER WILL OVER-ROTATE AND MAY CONTACT THE SUSPENSION LOWER SPRING SADDLE. Recall Details
Problem: ON CERTAIN TAG AND PUSHER AXLE ASSEMBLIES PURCHASED FROM RIDEWELL, THE AXLE ASSEMBLIES HAVE AN ACTUAL WEIGHT RATING LESS THAN THAT SPECIFIED ON THE LABEL AND THEREFORE FAIL TO COMPLY WITH THE REQUIREMENTS OF PART 567.5, "CERTIFICATION." Recall Details
Problem: ON CERTAIN TAG AND PUSHER AXLE ASSEMBLIES PURCHASED FROM RIDEWELL, THE AXLE ASSEMBLIES HAVE AN ACTUAL WEIGHT RATING LESS THAN THAT SPECIFIED ON THE LABEL AND THEREFORE FAIL TO COMPLY WITH THE REQUIREMENTS OF PART 567.5, "CERTIFICATION." Recall Details
Problem: ON CERTAIN TAG AND PUSHER AXLE ASSEMBLIES PURCHASED FROM RIDEWELL, THE AXLE ASSEMBLIES HAVE AN ACTUAL WEIGHT RATING LESS THAN THAT SPECIFIED ON THE LABEL AND THEREFORE FAIL TO COMPLY WITH THE REQUIREMENTS OF PART 567.5, "CERTIFICATION." Recall Details
Problem: ON CERTAIN TAG AND PUSHER AXLE ASSEMBLIES PURCHASED FROM RIDEWELL, THE AXLE ASSEMBLIES HAVE AN ACTUAL WEIGHT RATING LESS THAN THAT SPECIFIED ON THE LABEL AND THEREFORE FAIL TO COMPLY WITH THE REQUIREMENTS OF PART 567.5, "CERTIFICATION." Recall Details
|