|
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2021-2023 Inferno and Igniter vehicles. An additional resistor was incorrectly installed on the printed circuit board, which can disrupt CAN network communication and cause vehicle lighting to fail. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2021-2022 Inferno, Igniter, and Cinder fire trucks. The steering gears may have been assembled incorrectly, which can cause the gears to fracture. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2019-2022 Inferno, Igniter, and Cinder emergency vehicles. The fuel tubes between the fuel rail and the injectors for cylinders four, five, and six may fatigue and crack, which can result in a high pressure fuel leak. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2021-2023 Inferno and Igniter vehicles. An additional resistor was incorrectly installed on the printed circuit board, which can disrupt CAN network communication and cause vehicle lighting to fail. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2021-2022 Inferno and Cinder emergency vehicles. The rear axle drive pinion may fracture. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2021-2022 Inferno and Cinder emergency vehicles. The rear axle drive pinion may fracture. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2019-2022 Inferno, Igniter, and Cinder emergency vehicles. The fuel tubes between the fuel rail and the injectors for cylinders four, five, and six may fatigue and crack, which can result in a high pressure fuel leak. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2021-2023 Inferno and Igniter vehicles. An additional resistor was incorrectly installed on the printed circuit board, which can disrupt CAN network communication and cause vehicle lighting to fail. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2021-2022 Inferno, Igniter, and Cinder fire trucks. The steering gears may have been assembled incorrectly, which can cause the gears to fracture. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2019-2022 Inferno, Igniter, and Cinder emergency vehicles. The fuel tubes between the fuel rail and the injectors for cylinders four, five, and six may fatigue and crack, which can result in a high pressure fuel leak. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2017-2020 Inferno and Igniter vehicles. The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2017-2020 Inferno and Igniter vehicles. The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2019-2020 Inferno vehicles. The steering gear mounting bolts may become loose and back out, resulting in difficulty steering. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2019-2020 Inferno vehicles. The steering gear mounting bolts may become loose and back out, resulting in difficulty steering. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2015-2019 Inferno fire trucks equipped with independent front suspensions manufactured by Reyco Granning. The front shocks may separate from their upper mount on the front suspension. The loose shock may contact and damage the steering gear housing, possibly causing a steering fluid leak and a loss of power steering assist. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2019-2020 Inferno vehicles. The steering gear mounting bolts may become loose and back out, resulting in difficulty steering. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2019-2020 Inferno vehicles. The steering gear mounting bolts may become loose and back out, resulting in difficulty steering. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2017-2019 Ferrara Inferno, Igniter, Cinder, Ultra, and Intruder emergency vehicles equipped with Whelen accessory brake lights. Depending on the specific wiring of the vehicle, these brake lights may illuminate when the brake pedal has not been pressed. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment." Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2017-2020 Inferno and Igniter vehicles. The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2017-2020 Inferno and Igniter vehicles. The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2019-2022 Inferno, Igniter, and Cinder emergency vehicles. The fuel tubes between the fuel rail and the injectors for cylinders four, five, and six may fatigue and crack, which can result in a high pressure fuel leak. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2017-2019 Ferrara Inferno, Igniter, Cinder, Ultra, and Intruder emergency vehicles equipped with Whelen accessory brake lights. Depending on the specific wiring of the vehicle, these brake lights may illuminate when the brake pedal has not been pressed. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment." Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2015-2019 Inferno fire trucks equipped with independent front suspensions manufactured by Reyco Granning. The front shocks may separate from their upper mount on the front suspension. The loose shock may contact and damage the steering gear housing, possibly causing a steering fluid leak and a loss of power steering assist. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2017-2020 Inferno and Igniter vehicles. The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2017-2020 Inferno and Igniter vehicles. The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2017-2020 Inferno and Igniter vehicles. The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2017-2020 Inferno and Igniter vehicles. The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2015-2019 Inferno fire trucks equipped with independent front suspensions manufactured by Reyco Granning. The front shocks may separate from their upper mount on the front suspension. The loose shock may contact and damage the steering gear housing, possibly causing a steering fluid leak and a loss of power steering assist. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2017-2019 Ferrara Inferno, Igniter, Cinder, Ultra, and Intruder emergency vehicles equipped with Whelen accessory brake lights. Depending on the specific wiring of the vehicle, these brake lights may illuminate when the brake pedal has not been pressed. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment." Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2015-2019 Inferno fire trucks equipped with independent front suspensions manufactured by Reyco Granning. The front shocks may separate from their upper mount on the front suspension. The loose shock may contact and damage the steering gear housing, possibly causing a steering fluid leak and a loss of power steering assist. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain model year 2015-2016 Inferno, Igniter, Cinder, Ultra, and Intruder vehicles built on Freightliner and International chassis manufactured August 3, 2015, to April 29, 2016, equipped with pumps to provide pressurized water to aid in fighting fires. These pumps have 6" intake strainers that may have been improperly soldered during production and, as a result, the strainers may come apart during use, allowing parts of the strainer and debris to enter the pump, possibly damaging the pump. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain model year 2011-2016 Inferno, Igniter, Intruder, and Cinder emergency vehicles manufactured October 3, 2011, to May 31, 2016, equipped with Class 1 Ultraview Touchscreens manufactured by Hale Products. These touchscreens may experience false switch activations that can happen without the operator's knowledge causing accessories to turn on or off, affecting vehicle performance. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain model year 2015-2016 Inferno, Igniter, Intruder and Cinder fire trucks built on Freightliner and International chassis manufactured April 13, 2015, to May 30, 2016. The affected vehicles may be equipped with certain C20 and C21 split-shaft transmissions from Waterous. This transmission sends power to the wheels of an emergency response vehicle or powers an add-on unit such as a water pump used for fighting fires. A component within the shift unit may be damaged and as a result, the operator may not be able to switch the power output. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2015-2016 Inferno and International 4400, 2013-2016 Igniter, 2014-2017 Cinder and Freightliner M2 106, 2013-2014 Ember and 2013-2017 Kenworth T370 fire-fighting vehicles, equipped with Hale pressure relief valves in the water pumps used for fire fighting. Rings securing the valves may corrode over time after exposure to water, causing the ring to fail and the pressure relief valve to open, reducing the water pressure available for fire fighting. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2015-2016 Inferno and International 4400, 2013-2016 Igniter, 2014-2017 Cinder and Freightliner M2 106, 2013-2014 Ember and 2013-2017 Kenworth T370 fire-fighting vehicles, equipped with Hale pressure relief valves in the water pumps used for fire fighting. Rings securing the valves may corrode over time after exposure to water, causing the ring to fail and the pressure relief valve to open, reducing the water pressure available for fire fighting. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain model year 2011-2016 Inferno, Igniter, Intruder, and Cinder emergency vehicles manufactured October 3, 2011, to May 31, 2016, equipped with Class 1 Ultraview Touchscreens manufactured by Hale Products. These touchscreens may experience false switch activations that can happen without the operator's knowledge causing accessories to turn on or off, affecting vehicle performance. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain model year 2015-2016 Inferno, Igniter, Intruder and Cinder fire trucks built on Freightliner and International chassis manufactured April 13, 2015, to May 30, 2016. The affected vehicles may be equipped with certain C20 and C21 split-shaft transmissions from Waterous. This transmission sends power to the wheels of an emergency response vehicle or powers an add-on unit such as a water pump used for fighting fires. A component within the shift unit may be damaged and as a result, the operator may not be able to switch the power output. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain model year 2015-2016 Inferno, Igniter, Cinder, Ultra, and Intruder vehicles built on Freightliner and International chassis manufactured August 3, 2015, to April 29, 2016, equipped with pumps to provide pressurized water to aid in fighting fires. These pumps have 6" intake strainers that may have been improperly soldered during production and, as a result, the strainers may come apart during use, allowing parts of the strainer and debris to enter the pump, possibly damaging the pump. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2015-2019 Inferno fire trucks equipped with independent front suspensions manufactured by Reyco Granning. The front shocks may separate from their upper mount on the front suspension. The loose shock may contact and damage the steering gear housing, possibly causing a steering fluid leak and a loss of power steering assist. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain model year 2013-2014 Igniter and Inferno firetrucks manufactured October 16, 2013, to December 10, 2014. The affected vehicles are built with independent front suspensions that may have loose ball joints. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain model year 2013-2014 Igniter and Inferno firetrucks manufactured October 16, 2013, to December 10, 2014. The affected vehicles are built with independent front suspensions that may have loose ball joints. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain model year 2011-2016 Inferno, Igniter, Intruder, and Cinder emergency vehicles manufactured October 3, 2011, to May 31, 2016, equipped with Class 1 Ultraview Touchscreens manufactured by Hale Products. These touchscreens may experience false switch activations that can happen without the operator's knowledge causing accessories to turn on or off, affecting vehicle performance. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain model year 2013-2014 Igniter and Inferno firetrucks manufactured October 16, 2013, to December 10, 2014. The affected vehicles are built with independent front suspensions that may have loose ball joints. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain model year 2013-2014 Igniter and Inferno firetrucks manufactured October 16, 2013, to December 10, 2014. The affected vehicles are built with independent front suspensions that may have loose ball joints. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain model year 2011-2016 Inferno, Igniter, Intruder, and Cinder emergency vehicles manufactured October 3, 2011, to May 31, 2016, equipped with Class 1 Ultraview Touchscreens manufactured by Hale Products. These touchscreens may experience false switch activations that can happen without the operator's knowledge causing accessories to turn on or off, affecting vehicle performance. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain model year 2011-2016 Inferno, Igniter, Intruder, and Cinder emergency vehicles manufactured October 3, 2011, to May 31, 2016, equipped with Class 1 Ultraview Touchscreens manufactured by Hale Products. These touchscreens may experience false switch activations that can happen without the operator's knowledge causing accessories to turn on or off, affecting vehicle performance. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2004-2012 Inferno and Igniter emergency vehicles, equipped with Timoney Independent Front Suspensions. Inconsistent machining may result in fatigue cracks developing over time in the front axle spindles, causing failure of the spindle and the possible separation of a front wheel from the vehicle. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2004-2012 Inferno and Igniter emergency vehicles, equipped with Timoney Independent Front Suspensions. Inconsistent machining may result in fatigue cracks developing over time in the front axle spindles, causing failure of the spindle and the possible separation of a front wheel from the vehicle. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain model year 2011-2016 Inferno, Igniter, Intruder, and Cinder emergency vehicles manufactured October 3, 2011, to May 31, 2016, equipped with Class 1 Ultraview Touchscreens manufactured by Hale Products. These touchscreens may experience false switch activations that can happen without the operator's knowledge causing accessories to turn on or off, affecting vehicle performance. Recall Details
Problem: FERRARA IS RECALLING CERTAIN MODEL YEAR 2009-2011 INFERNO AND IGNITER VEHICLES EQUIPPED WITH MERITOR WABCO ELECTRONIC STABILITY CONTROL (ESC), MANUFACTURED FROM APRIL 2009, THROUGH OCTOBER 2011. THE ESC MODULE MAY CAUSE THE ESC SYSTEM TO ACTIVATE UNNECESSARILY WHEN THE VEHICLE IS DRIVEN IN A PARTICULAR MANNER ON CERTAIN UNIQUE ROAD CONDITIONS AND MAY ADVERSELY AFFECT THE SLIP ANGLE CALCULATION BY THE ESC MODULE. Recall Details
Problem: FERRARA IS RECALLING CERTAIN MODEL YEAR 2009-2011 INFERNO AND IGNITER VEHICLES EQUIPPED WITH MERITOR WABCO ELECTRONIC STABILITY CONTROL (ESC), MANUFACTURED FROM APRIL 2009, THROUGH OCTOBER 2011. THE ESC MODULE MAY CAUSE THE ESC SYSTEM TO ACTIVATE UNNECESSARILY WHEN THE VEHICLE IS DRIVEN IN A PARTICULAR MANNER ON CERTAIN UNIQUE ROAD CONDITIONS AND MAY ADVERSELY AFFECT THE SLIP ANGLE CALCULATION BY THE ESC MODULE. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2004-2012 Inferno and Igniter emergency vehicles, equipped with Timoney Independent Front Suspensions. Inconsistent machining may result in fatigue cracks developing over time in the front axle spindles, causing failure of the spindle and the possible separation of a front wheel from the vehicle. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2004-2012 Inferno and Igniter emergency vehicles, equipped with Timoney Independent Front Suspensions. Inconsistent machining may result in fatigue cracks developing over time in the front axle spindles, causing failure of the spindle and the possible separation of a front wheel from the vehicle. Recall Details
Problem: FERRARA IS RECALLING 89 MODEL YEAR 2008-2009 INFERNO AND IGNITER FIRE TRUCKS EQUIPPED WITH CERTAIN HALDEX QUICK RELEASE VALVES (QRV). THE RUBBER DIAPHRAGM INSIDE THE QRV MAY EXPERIENCE DELAMINATION RESULTING IN SIGNIFICANT LEVELS OF AIR PRESSURE LEAKAGE PAST AND/OR THROUGH THE DIAPHRAGM, OR THE DEVELOPMENT OF A BUBBLE IN THE DIAPHRAGM WHICH MAY TRAP AIR PRESSURE IN THE VALVE AND NOT ALLOW THE SERVICE BRAKES TO RELEASE. Recall Details
Problem: FERRARA IS RECALLING CERTAIN MODEL YEAR 2009-2011 INFERNO AND IGNITER VEHICLES EQUIPPED WITH MERITOR WABCO ELECTRONIC STABILITY CONTROL (ESC), MANUFACTURED FROM APRIL 2009, THROUGH OCTOBER 2011. THE ESC MODULE MAY CAUSE THE ESC SYSTEM TO ACTIVATE UNNECESSARILY WHEN THE VEHICLE IS DRIVEN IN A PARTICULAR MANNER ON CERTAIN UNIQUE ROAD CONDITIONS AND MAY ADVERSELY AFFECT THE SLIP ANGLE CALCULATION BY THE ESC MODULE. Recall Details
Problem: FERRARA IS RECALLING 89 MODEL YEAR 2008-2009 INFERNO AND IGNITER FIRE TRUCKS EQUIPPED WITH CERTAIN HALDEX QUICK RELEASE VALVES (QRV). THE RUBBER DIAPHRAGM INSIDE THE QRV MAY EXPERIENCE DELAMINATION RESULTING IN SIGNIFICANT LEVELS OF AIR PRESSURE LEAKAGE PAST AND/OR THROUGH THE DIAPHRAGM, OR THE DEVELOPMENT OF A BUBBLE IN THE DIAPHRAGM WHICH MAY TRAP AIR PRESSURE IN THE VALVE AND NOT ALLOW THE SERVICE BRAKES TO RELEASE. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2004-2012 Inferno and Igniter emergency vehicles, equipped with Timoney Independent Front Suspensions. Inconsistent machining may result in fatigue cracks developing over time in the front axle spindles, causing failure of the spindle and the possible separation of a front wheel from the vehicle. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2004-2012 Inferno and Igniter emergency vehicles, equipped with Timoney Independent Front Suspensions. Inconsistent machining may result in fatigue cracks developing over time in the front axle spindles, causing failure of the spindle and the possible separation of a front wheel from the vehicle. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2004-2012 Inferno and Igniter emergency vehicles, equipped with Timoney Independent Front Suspensions. Inconsistent machining may result in fatigue cracks developing over time in the front axle spindles, causing failure of the spindle and the possible separation of a front wheel from the vehicle. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2004-2012 Inferno and Igniter emergency vehicles, equipped with Timoney Independent Front Suspensions. Inconsistent machining may result in fatigue cracks developing over time in the front axle spindles, causing failure of the spindle and the possible separation of a front wheel from the vehicle. Recall Details
Problem: ON CERTAIN FIRE TRUCKS EQUIPPED WITH CERTAIN NMB-MINEBEA KINGPIN BALLPIN SUSPENSION ASSEMBLIES, THE KINGPIN BALLPIN ASSEMBLY CAN FRACTURE POSSIBLY ALLOWING THE ASSOCIATED WHEEL TO DISENGAGE FROM PART OF THE SUSPENSION. Recall Details
Problem: ON CERTAIN FIRE TRUCKS EQUIPPED WITH CERTAIN NMB-MINEBEA KINGPIN BALLPIN SUSPENSION ASSEMBLIES, THE KINGPIN BALLPIN ASSEMBLY CAN FRACTURE POSSIBLY ALLOWING THE ASSOCIATED WHEEL TO DISENGAGE FROM PART OF THE SUSPENSION. Recall Details
Problem: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2004-2012 Inferno and Igniter emergency vehicles, equipped with Timoney Independent Front Suspensions. Inconsistent machining may result in fatigue cracks developing over time in the front axle spindles, causing failure of the spindle and the possible separation of a front wheel from the vehicle. Recall Details
Problem: ON CERTAIN FIRE TRUCKS EQUIPPED WITH CERTAIN NMB-MINEBEA KINGPIN BALLPIN SUSPENSION ASSEMBLIES, THE KINGPIN BALLPIN ASSEMBLY CAN FRACTURE POSSIBLY ALLOWING THE ASSOCIATED WHEEL TO DISENGAGE FROM PART OF THE SUSPENSION. Recall Details
|