|
Problem: Genie Industries, Inc. (Genie) is recalling certain 2020 TZ-50 trailers. The bolted joints of the tongue structure may loosen and possibly separate from the main chassis. Recall Details
Problem: Genie Industries, Inc. (Genie) is recalling certain 2020 TZ-34 and TZ-50 trailer mounted boom lifts. The bolts that connect the slew turntable bearing to the chassis may have been under tightened. Recall Details
Problem: Genie Industries, Inc. (Genie) is recalling certain 2019 TZ-34 and TZ-50 trailer-mounted aerial devices. The battery cable ends at the quick disconnect may have been improperly crimped, resulting in possible excessive heat build-up of the conductor. Recall Details
Problem: GENIE IS RECALLING CERTAIN TZ-34 AND TZ-50 TRAILER MOUNTED AERIAL WORK PLATFORM BOOMS, MANUFACTURED FROM JANUARY 1, 2010, THROUGH MAY 1, 2011, BECAUSE THE MOTOR CONTROLLER CAN FAIL. THIS COMPONENT WAS ALSO INSTALLED AS A SERVICE PART REPLACEMENT ON TMZ 34/19 AND TMZ 50 UNITS AS PART NUMBER 96769 AND KIT 99854 FROM JANUARY 1, 2010, THROUGH AUGUST 7, 2011. THIS RECALL IS AN EXPANSION OF A PREVIOUS RECALL. PLEASE SEE RECALL CAMPAIGN NUMBER 11V-373. Recall Details
Problem: GENIE IS RECALLING CERTAIN TZ-34 AND TZ-50 TRAILER MOUNTED AERIAL WORK PLATFORM BOOMS, MANUFACTURED FROM MAY 02, 2011, THROUGH JUNE 30, 2011, THAT ARE EQUIPPED WITH A NEWLY DESIGNED MOTOR CONTROLLER COMPONENT. THIS COMPONENT IS ALSO INSTALLED AS A SERVICE PART REPLACEMENT ON TMZ 34/19 AND TMZ 50 AS PART NUMBER 96769 AND KIT 99854 FROM APRIL 13, 2011, THROUGH JULY 13, 2011. THE MOTOR CONTROLLER CAN FAIL. Recall Details
Problem: GENIE IS RECALLING CERTAIN TZ-34 AND TZ-50 TRAILER MOUNTED AERIAL WORK PLATFORM BOOMS, MANUFACTURED FROM JANUARY 1, 2010, THROUGH MAY 1, 2011, BECAUSE THE MOTOR CONTROLLER CAN FAIL. THIS COMPONENT WAS ALSO INSTALLED AS A SERVICE PART REPLACEMENT ON TMZ 34/19 AND TMZ 50 UNITS AS PART NUMBER 96769 AND KIT 99854 FROM JANUARY 1, 2010, THROUGH AUGUST 7, 2011. THIS RECALL IS AN EXPANSION OF A PREVIOUS RECALL. PLEASE SEE RECALL CAMPAIGN NUMBER 11V-373. Recall Details
Problem: GENIE IS RECALLING CERTAIN MODEL YEAR 2011 TZ-50 TRAILERS. MATERIALS USED IN THE BOOM AND CHASSIS COMPONENTS ARE SUSCEPTIBLE TO CRACKING. Recall Details
Problem: GENIE IS RECALLING CERTAIN MODEL YEAR 2009 TZ-34 AND TZ-50 VEHICLES MANUFACTURED FROM APRIL 1 THROUGH AUGUST 31, 2009, EQUIPPED WITH TRAILER MOUNTED AERIAL WORK PLATFORM BOOMS. MATERIAL USED IN THE PLATFORM SUPPORT COMPONENTS WAS NOT IN COMPLIANCE THE MANUFACTURER'S SPECIFICATIONS. Recall Details
Problem: ON CERTAIN TRAILER MOUNTED AERIAL WORK PLATFORM BOOMS, THE TURNTABLE BEARING BOLTS MAY NOT BE TIGHTENED TO SPECIFICATIONS. BOLTS THAT ARE UNDER-TORQUED CAN COME LOOSE OVER TIME. Recall Details
Problem: ON CERTAIN TRUCKS, DURING ASSEMBLY, THE DRAG LINK ATTACHMENT NUTS AT THE PITMAN ARM AND STEERING ARM MAY HAVE BEEN INCORRECTLY TORQUED. RESIDUAL GREASE AND PAINT WHICH WAS APPLIED AS A RUST INHIBITOR ON THE STEERING ARM MAY HAVE CONTRIBUTED TO A LOSS OF TORQUE AFTER ASSEMBLY. Recall Details
Problem: ON CERTAIN TRAILER MOUNTED AERIAL WORK PLATFORM BOOMS, THE OUTRIGGERS (STABILIZERS) CAN FUNCTION WHEN THE MACHINE IS NOT IN A FULLY STOWED POSITION. Recall Details
Problem: ON CERTAIN TRAILER MOUNTED AERIAL WORK PLATFORM BOOMS, THE HOLD DOWN BRACKET THAT SECURES THE MAST/UPPER STRUCTURE FOR TRANSPORT MAY BECOME DAMAGED OR LOOSE OVER TIME. IF THE MAST HOLD-DOWN BRACKET SUSTAINS STRUCTURAL DAMAGE, IT MAY NO LONGER BE CAPABLE OF HOLDING THE TRAILER MAST IN PLACE DURING TRANSPORT. Recall Details
Problem: ON CERTAIN TRAILER MOUNTED AERIAL WORK PLATFORM BOOMS, THE OUTRIGGERS (STABILIZERS) CAN FUNCTION WHEN THE MACHINE IS NOT IN A FULLY STOWED POSITION. Recall Details
Problem: ON CERTAIN TRUCKS, DURING ASSEMBLY, THE DRAG LINK ATTACHMENT NUTS AT THE PITMAN ARM AND STEERING ARM MAY HAVE BEEN INCORRECTLY TORQUED. RESIDUAL GREASE AND PAINT WHICH WAS APPLIED AS A RUST INHIBITOR ON THE STEERING ARM MAY HAVE CONTRIBUTED TO A LOSS OF TORQUE AFTER ASSEMBLY. Recall Details
|