|
Problem: Navistar, Inc. (Navistar) is recalling certain model year 2017 International ProStar, LoneStar, PayStar, HX, and 9900 trucks equipped with a Cummins ISX15L engine using certain engine control modules (ECM). These ECM's may experience an internal electrical short that can cause a fuse to blow, resulting in an unexpected engine stall without the ability to restart the engine. Recall Details
Problem: Navistar, Inc. (Navistar) is recalling certain model year 2017 International ProStar, LoneStar, PayStar, HX, and 9900 trucks equipped with a Cummins ISX15L engine using certain engine control modules (ECM). These ECM's may experience an internal electrical short that can cause a fuse to blow, resulting in an unexpected engine stall without the ability to restart the engine. Recall Details
Problem: Navistar, Inc. (Navistar) is recalling certain model year 2015-2016 International 9900 trucks manufactured January 6, 2014, to March 12, 2015, and 2015-2016 International Lonestar trucks manufactured February 20, 2014, to March 13, 2015. The affected vehicles are equipped with a 6" diameter stack tail pipe, that may not have sufficient support. The unsupported weight of the upper stack tail pipe and vibration associated with normal vehicle operation over time may cause a crack of the weld joint between the inlet pipe and the flare expansion of the stack tail pipe, which may result in partial or full separation of the stack tail pipe from the vertical exhaust pipe. Recall Details
Problem: Navistar, Inc. (Navistar) is recalling certain model year 2015-2016 International 9900, DuraStar, LoneStar, PayStar, ProStar, WorkStar and 2015 International TranStar and IC Bus CE vehicles equipped with a Haldex air braking system. The affected brake actuators may have been manufactured with an incomplete attachment of the internal rubber diaphragm to the actuation mechanism. This could cause dragging or overheated brakes. Recall Details
Problem: Navistar, Inc. (Navistar) is recalling certain model year 2015-2016 International 9900 trucks manufactured January 6, 2014, to March 12, 2015, and 2015-2016 International Lonestar trucks manufactured February 20, 2014, to March 13, 2015. The affected vehicles are equipped with a 6" diameter stack tail pipe, that may not have sufficient support. The unsupported weight of the upper stack tail pipe and vibration associated with normal vehicle operation over time may cause a crack of the weld joint between the inlet pipe and the flare expansion of the stack tail pipe, which may result in partial or full separation of the stack tail pipe from the vertical exhaust pipe. Recall Details
Problem: Navistar, Inc. (Navistar) is recalling certain model year 2015-2016 International 9900, DuraStar, LoneStar, PayStar, ProStar, WorkStar and 2015 International TranStar and IC Bus CE vehicles equipped with a Haldex air braking system. The affected brake actuators may have been manufactured with an incomplete attachment of the internal rubber diaphragm to the actuation mechanism. This could cause dragging or overheated brakes. Recall Details
Problem: NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2012-2013 IC BUS CE-C, HC, AND INTERNATIONAL 9400 AND CERTAIN MODEL YEAR 2011 THROUGH 2013 INTERNATIONAL DURASTAR, PAYSTAR, WORKSTAR, TRANSTAR, LONESTAR, PROSTAR, 9200, AND 9800, AND CERTAIN MODEL YEAR 2013 INTERNATIONAL 9900, VEHICLES, MANUFACTURED FROM DECEMBER 2, 2010, THROUGH JANUARY 26, 2012, AND EQUIPPED WITH BENDIX ATR-6 TRACTION RELAY VALVES. IN EXTREMELY COLD CONDITIONS, THESE BENDIX RELAY VALVES MAY POTENTIALLY DEVELOP INTERNAL LEAKAGE. INTERNAL LEAKAGE CAN LEAD TO AIR PRESSURE BEING DELIVERED TO AFFECTED PRIMARY OR SECONDARY BRAKES CAUSING CONTINUOUS BRAKE APPLICATION. Recall Details
Problem: Navistar Inc., is recalling certain model year 2012-2013 International Lonestar, Paystar, Prostar, Workstar and 9900 trucks, equipped with feature code 0504501, 0504504, or 04EWM Reduced Stopping Distance (RSD) brake linings and with or without feature code 04WCS Greased For Life front air S-cam brakes. In the affected vehicles, the brake S-cam brackets may fracture. Recall Details
Problem: NAVISTAR HAS NOTIFIED NHTSA OF A DEFECT ON CERTAIN MODEL YEAR 2008-2011 INTERNATIONAL TRUCKS EQUIPPED WITH AN OPTIONAL JUMP START STUD. CORROSION AT THE BASE OF THE STUD MAY CAUSE AN ELECTRICAL SHORT BETWEEN THE STUD AND BATTERY BOX. Recall Details
Problem: NAVISTAR HAS NOTIFIED NHTSA OF A DEFECT ON CERTAIN MODEL YEAR 2008-2011 INTERNATIONAL TRUCKS EQUIPPED WITH AN OPTIONAL JUMP START STUD. CORROSION AT THE BASE OF THE STUD MAY CAUSE AN ELECTRICAL SHORT BETWEEN THE STUD AND BATTERY BOX. Recall Details
Problem: NAVISTAR HAS NOTIFIED NHTSA OF A DEFECT ON CERTAIN MODEL YEAR 2008-2011 INTERNATIONAL TRUCKS EQUIPPED WITH AN OPTIONAL JUMP START STUD. CORROSION AT THE BASE OF THE STUD MAY CAUSE AN ELECTRICAL SHORT BETWEEN THE STUD AND BATTERY BOX. Recall Details
Problem: ON CERTAIN TRUCKS EQUIPPED WITH CATERPILLAR C10, C11, C12, C13, C15 OR C16 ENGINES, THE POSITIVE BATTERY CABLES THAT SUPPLY POWER FROM THE BATTERIES TO THE STARTER MAY RUB AGAINST AN ELECTRICAL GROUND CABLE BETWEEN THE ENGINE AND THE STARTER, AN ELECTRICAL GROUND CABLE BETWEEN THE FRAME RAIL AND THE STARTER, OR THE FRAME RAIL ITSELF. Recall Details
Problem: ON CERTAIN TRUCKS EQUIPPED WITH CATERPILLAR C10, C11, C12, C13, C15 OR C16 ENGINES, THE POSITIVE BATTERY CABLES THAT SUPPLY POWER FROM THE BATTERIES TO THE STARTER MAY RUB AGAINST AN ELECTRICAL GROUND CABLE BETWEEN THE ENGINE AND THE STARTER, AN ELECTRICAL GROUND CABLE BETWEEN THE FRAME RAIL AND THE STARTER, OR THE FRAME RAIL ITSELF. Recall Details
Problem: ON CERTAIN TRUCKS EQUIPPED WITH CATERPILLAR C10, C11, C12, C13, C15 OR C16 ENGINES, THE POSITIVE BATTERY CABLES THAT SUPPLY POWER FROM THE BATTERIES TO THE STARTER MAY RUB AGAINST AN ELECTRICAL GROUND CABLE BETWEEN THE ENGINE AND THE STARTER, AN ELECTRICAL GROUND CABLE BETWEEN THE FRAME RAIL AND THE STARTER, OR THE FRAME RAIL ITSELF. Recall Details
Problem: ON CERTAIN TRUCKS EQUIPPED WITH CATERPILLAR C10, C11, C12, C13, C15 OR C16 ENGINES, THE POSITIVE BATTERY CABLES THAT SUPPLY POWER FROM THE BATTERIES TO THE STARTER MAY RUB AGAINST AN ELECTRICAL GROUND CABLE BETWEEN THE ENGINE AND THE STARTER, AN ELECTRICAL GROUND CABLE BETWEEN THE FRAME RAIL AND THE STARTER, OR THE FRAME RAIL ITSELF. Recall Details
Problem: ON CERTAIN TRUCKS EQUIPPED WITH CATERPILLAR C10, C11, C12, C13, C15 OR C16 ENGINES, THE POSITIVE BATTERY CABLES THAT SUPPLY POWER FROM THE BATTERIES TO THE STARTER MAY RUB AGAINST AN ELECTRICAL GROUND CABLE BETWEEN THE ENGINE AND THE STARTER, AN ELECTRICAL GROUND CABLE BETWEEN THE FRAME RAIL AND THE STARTER, OR THE FRAME RAIL ITSELF. Recall Details
Problem: ON CERTAIN HEAVY DUTY TRUCKS, THE JOINT BETWEEN THE LOWER PORTION OF THE STEERING COLUMN AND THE UPPER END OF THE INTERMEDIATE STEERING SHAFT MAY HAVE A MISSING OR LOOSE PINCH BOLT. THIS CONDITION COULD ALSO OCCUR AT THE LOWER END OF THE INTERMEDIATE STEERING SHAFT AT THE STEERING GEAR CONNECTION. Recall Details
Problem: ON CERTAIN CONVENTIONAL TRUCKS EQUIPPED WITH PRO-SLEEPER BERTHS, WATER INTRUSION CAN BE FOUND IN THE BUNK CONTROL PANEL AREA AND POOL IN THE TOPS OF THE DOME LIGHT, TV/VCR, AND OR REFRIGERATOR POWER SWITCHES. Recall Details
Problem: ON CERTAIN HEAVY DUTY TRUCKS,THE LOWER TIE ROD ARMS ON CERTAIN AXLES WERE NOT INDUCTION HARDENED AS REQUIRED BY INTERNATIONAL'S SPECIFICATION. Recall Details
Problem: ON CERTAIN TRUCKS EQUIPPED WITH CATERPILLAR C10, C11, C12, C13, C15 OR C16 ENGINES, THE POSITIVE BATTERY CABLES THAT SUPPLY POWER FROM THE BATTERIES TO THE STARTER MAY RUB AGAINST AN ELECTRICAL GROUND CABLE BETWEEN THE ENGINE AND THE STARTER, AN ELECTRICAL GROUND CABLE BETWEEN THE FRAME RAIL AND THE STARTER, OR THE FRAME RAIL ITSELF. Recall Details
Problem: ON CERTAIN CONVENTIONAL TRUCKS EQUIPPED WITH PRO-SLEEPER BERTHS, WATER INTRUSION CAN BE FOUND IN THE BUNK CONTROL PANEL AREA AND POOL IN THE TOPS OF THE DOME LIGHT, TV/VCR, AND OR REFRIGERATOR POWER SWITCHES. Recall Details
Problem: ON CERTAIN HEAVY DUTY TRUCKS, THE JOINT BETWEEN THE LOWER PORTION OF THE STEERING COLUMN AND THE UPPER END OF THE INTERMEDIATE STEERING SHAFT MAY HAVE A MISSING OR LOOSE PINCH BOLT. THIS CONDITION COULD ALSO OCCUR AT THE LOWER END OF THE INTERMEDIATE STEERING SHAFT AT THE STEERING GEAR CONNECTION. Recall Details
Problem: ON CERTAIN HEAVY DUTY TRUCKS,THE LOWER TIE ROD ARMS ON CERTAIN AXLES WERE NOT INDUCTION HARDENED AS REQUIRED BY INTERNATIONAL'S SPECIFICATION. Recall Details
Problem: ON CERTAIN CONVENTIONAL TRUCKS EQUIPPED WITH PRO-SLEEPER BERTHS, WATER INTRUSION CAN BE FOUND IN THE BUNK CONTROL PANEL AREA AND POOL IN THE TOPS OF THE DOME LIGHT, TV/VCR, AND OR REFRIGERATOR POWER SWITCHES. Recall Details
Problem: VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS BUILT WITH INTERNATIONAL CODE 16SCH (LOWER BUNK WEBBING RESTRAINT). INCORRECT BOLTS WERE USED TO HOLD THE BUNK WEBBING RESTRAINT LATCH BRACKETS TO THE BUNK BASE. Recall Details
Problem: ON CERTAIN CONVENTIONAL TRUCKS EQUIPPED WITH PRO-SLEEPER BERTHS, WATER INTRUSION CAN BE FOUND IN THE BUNK CONTROL PANEL AREA AND POOL IN THE TOPS OF THE DOME LIGHT, TV/VCR, AND OR REFRIGERATOR POWER SWITCHES. Recall Details
Problem: ON CERTAIN CONVENTIONAL TRUCKS EQUIPPED WITH PRO-SLEEPER BERTHS, WATER INTRUSION CAN BE FOUND IN THE BUNK CONTROL PANEL AREA AND POOL IN THE TOPS OF THE DOME LIGHT, TV/VCR, AND OR REFRIGERATOR POWER SWITCHES. Recall Details
Problem: VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS BUILT WITH INTERNATIONAL CODE 16SCH (LOWER BUNK WEBBING RESTRAINT). INCORRECT BOLTS WERE USED TO HOLD THE BUNK WEBBING RESTRAINT LATCH BRACKETS TO THE BUNK BASE. Recall Details
Problem: VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS BUILT WITH INTERNATIONAL CODE 16SCH (LOWER BUNK WEBBING RESTRAINT). INCORRECT BOLTS WERE USED TO HOLD THE BUNK WEBBING RESTRAINT LATCH BRACKETS TO THE BUNK BASE. Recall Details
Problem: ON CERTAIN CONVENTIONAL TRUCKS EQUIPPED WITH PRO-SLEEPER BERTHS, WATER INTRUSION CAN BE FOUND IN THE BUNK CONTROL PANEL AREA AND POOL IN THE TOPS OF THE DOME LIGHT, TV/VCR, AND OR REFRIGERATOR POWER SWITCHES. Recall Details
Problem: ON CERTAIN CONVENTIONAL TRUCKS EQUIPPED WITH PRO-SLEEPER BERTHS, WATER INTRUSION CAN BE FOUND IN THE BUNK CONTROL PANEL AREA AND POOL IN THE TOPS OF THE DOME LIGHT, TV/VCR, AND OR REFRIGERATOR POWER SWITCHES. Recall Details
Problem: ON CERTAIN CONVENTIONAL TRUCKS EQUIPPED WITH PRO-SLEEPER BERTHS, WATER INTRUSION CAN BE FOUND IN THE BUNK CONTROL PANEL AREA AND POOL IN THE TOPS OF THE DOME LIGHT, TV/VCR, AND OR REFRIGERATOR POWER SWITCHES. Recall Details
Problem: ON CERTAIN CONVENTIONAL TRUCKS EQUIPPED WITH PRO-SLEEPER BERTHS, WATER INTRUSION CAN BE FOUND IN THE BUNK CONTROL PANEL AREA AND POOL IN THE TOPS OF THE DOME LIGHT, TV/VCR, AND OR REFRIGERATOR POWER SWITCHES. Recall Details
|