INTERNATIONAL HARVESTER 9000 Recalls - View the latest INTERNATIONAL HARVESTER 9000 Recalls from the NHTSA

Auto Recalls For Consumers

Car Recalls

Tire Recalls

Motorcycle Recalls

RV Recalls

Commercial Vehicles

Child Car Seats

Complaints

Search

|

Alerts

INTERNATIONAL HARVESTER 9000 RECALLS - (29 Recalls Found)

Find your vehicle listed below. Results are sorted year from newest to oldest. Select the desired vehicle to view the complete details. Information provided by the National Highway Traffic Safety Administration.

---

2001 INTERNATIONAL HARVESTER 9000 Recall - SERVICE BRAKES, AIR:SUPPLY:CHECK VALVE Problem: ON CERTAIN MEDIUM AND HEAVY DUTY TRUCKS, A BRASS FITTING CONNECTS THE DOUBLE CHECK VALVE TO THE BRAKE RELAY VALVE. WITH CERTAIN INPUTS TO THE VEHICLE, THE WEIGHT OF THE CHECK VALVE ON THE FITTING CAN CAUSE THE ASSEMBLY TO RESONATE. THE SUBJECT VIBRATION CAN CAUSE EXCESSIVE STRAIN LEVELS IN THE FITTING, WHICH COULD EVENTUALLY FATIGUE AND FAIL. Recall Details 2001 INTERNATIONAL HARVESTER 9000 Recall - SERVICE BRAKES, AIR Problem: ON CERTAIN HEAVY DUTY TRUCKS, A BRASS FITTING CONNECTS THE DOUBLE CHECK VALVE TO THE BRAKE RELAY VALVE. WITH CERTAIN INPUTS TO THE VEHICLE, THE WEIGHT OF THE CHECK VALVE ON THE FITTING CAN CAUSE THE ASSEMBLY TO RESONATE. THE SUBJECT VIBRATION CAN CAUSE EXCESSIVE STRAIN LEVELS IN THE FITTING, WHICH COULD EVENTUALLY FATIGUE AND FAIL.  Recall Details 2001 INTERNATIONAL HARVESTER 9000 Recall - SUSPENSION:FRONT:HUB Problem: ON CERTAIN HEAVY AND MEDIUM DUTY TRUCKS AND BUSES EQUIPPED WITH TRUCK HUB UNITS MANUFACTURED BY SKF EXCLUSIVELY FOR USE ON ARVINMERITOR'S FF98X SERIES NON-DRIVE STEER AXLES, THE HUB UNIT BEARINGS CAN WEAR PREMATURELY. Recall Details 2000 INTERNATIONAL HARVESTER 9000 Recall - SUSPENSION:FRONT:HUB Problem: ON CERTAIN HEAVY AND MEDIUM DUTY TRUCKS AND BUSES EQUIPPED WITH TRUCK HUB UNITS MANUFACTURED BY SKF EXCLUSIVELY FOR USE ON ARVINMERITOR'S FF98X SERIES NON-DRIVE STEER AXLES, THE HUB UNIT BEARINGS CAN WEAR PREMATURELY. Recall Details 2000 INTERNATIONAL HARVESTER 9000 Recall - SERVICE BRAKES, AIR Problem: ON CERTAIN HEAVY DUTY TRUCKS, A BRASS FITTING CONNECTS THE DOUBLE CHECK VALVE TO THE BRAKE RELAY VALVE. WITH CERTAIN INPUTS TO THE VEHICLE, THE WEIGHT OF THE CHECK VALVE ON THE FITTING CAN CAUSE THE ASSEMBLY TO RESONATE. THE SUBJECT VIBRATION CAN CAUSE EXCESSIVE STRAIN LEVELS IN THE FITTING, WHICH COULD EVENTUALLY FATIGUE AND FAIL.  Recall Details 2000 INTERNATIONAL HARVESTER 9000 Recall - STEERING:LINKAGES:TIE ROD ASSEMBLY Problem: VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH AXLE ASSEMBLIES WHICH MAY HAVE BEEN MANUFACTURED WITH TRW MODEL 20EDL BALL SOCKETS/DRAG LINKS. THE TIE ROD BALL-SOCKET BEARINGS HAVE A BELOW SPECIFICATION CASE DEPTH AND/OR HARDNESS WHICH CAN LEAD TO PREMATURE WEAR OUT OF THE SOCKET IN SOME APPLICATIONS. Recall Details 2000 INTERNATIONAL HARVESTER 9000 Recall - SERVICE BRAKES, AIR:SUPPLY:CHECK VALVE Problem: ON CERTAIN MEDIUM AND HEAVY DUTY TRUCKS, A BRASS FITTING CONNECTS THE DOUBLE CHECK VALVE TO THE BRAKE RELAY VALVE. WITH CERTAIN INPUTS TO THE VEHICLE, THE WEIGHT OF THE CHECK VALVE ON THE FITTING CAN CAUSE THE ASSEMBLY TO RESONATE. THE SUBJECT VIBRATION CAN CAUSE EXCESSIVE STRAIN LEVELS IN THE FITTING, WHICH COULD EVENTUALLY FATIGUE AND FAIL. Recall Details 2000 INTERNATIONAL HARVESTER 9000 Recall - SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP Problem: VEHICLE DESCRIPTION: SCHOOL AND HEAVY DUTY TRUCKS BUILT WITH BENDIX AIR ABS. THE ABS SENSOR WIRES ON ROTATING PARTS CHAFES WHICH CAN LEAD TO A FALSE SIGNAL BEING SENT TO THE BENDIX ABS ELECTRONIC CONTROL UNIT (ECU). Recall Details 2000 INTERNATIONAL HARVESTER 9000 Recall - EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH Problem: VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS. THE BRAKE LIGHT SWITCH AND THE CRUISE CONTROL SWITCH ARE MOUNTED IN SUCH A WAY AS TO ALLOW MOISTURE WITHIN THE AIR BRAKE SYSTEM TO COLLECT INSIDE THE SWITCHES. IF THE MOISTURE IN THE SWITCHES FREEZES, THE BRAKE LIGHTS MAY NOT FUNCTION AND THE CRUISE CONTROL MIGHT NOT DISENGAGE WHEN THE BRAKE PEDAL IS DEPRESSED. Recall Details 2000 INTERNATIONAL HARVESTER 9000 Recall - VEHICLE SPEED CONTROL Problem: VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS. THE BRAKE LIGHT SWITCH AND THE CRUISE CONTROL SWITCH ARE MOUNTED IN SUCH A WAY AS TO ALLOW MOISTURE WITHIN THE AIR BRAKE SYSTEM TO COLLECT INSIDE THE SWITCHES. IF THE MOISTURE IN THE SWITCHES FREEZES, THE BRAKE LIGHTS MAY NOT FUNCTION AND THE CRUISE CONTROL MIGHT NOT DISENGAGE WHEN THE BRAKE PEDAL IS DEPRESSED. Recall Details 2000 INTERNATIONAL HARVESTER 9000 Recall - SERVICE BRAKES, AIR:ANTILOCK Problem: VEHICLE DESCRIPTION: MEDIUM AND HEAVY DUTY TRUCKS BUILT WITH BENDIX AIR ABS WITH AN EC-17 1030R ELECTRONIC CONTROL UNIT (ECU). THERE HAVE BEEN REPORTS OF UNWANTED ABS ACTIVATION AT LOW SPEEDS CAUSED BY 1) CHAFED ABS WHEEL SPEED SENSOR WIRES ON ROTATING PARTS OR 2) A DAMAGED COMPONENT AT THE WHEEL END THAT GENERATES A CERTAIN TYPE OF ERRATIC SENSOR SIGNAL. Recall Details 2000 INTERNATIONAL HARVESTER 9000 Recall - SERVICE BRAKES, AIR:ANTILOCK Problem: VEHICLE DESCRIPTION: TRACTORS BUILT WITH BENDIX AIR ABS WITH AN EC-17 1030R ELECTRONIC CONTROL UNIT (ECU). THERE HAVE BEEN REPORTS OF UNWANTED ABS ACTIVATION AT LOW SPEEDS CAUSED BY 1) CHAFED ABS WHEEL SPEED SENSOR WIRES ON ROTATING PARTS OR 2) A DAMAGED COMPONENT AT THE WHEEL END THAT GENERATES A CERTAIN TYPE OF ERRATIC SENSOR SIGNAL. Recall Details 1999 INTERNATIONAL HARVESTER 9000 Recall - SERVICE BRAKES, AIR:ANTILOCK Problem: VEHICLE DESCRIPTION: TRACTORS BUILT WITH BENDIX AIR ABS WITH AN EC-17 1030R ELECTRONIC CONTROL UNIT (ECU). THERE HAVE BEEN REPORTS OF UNWANTED ABS ACTIVATION AT LOW SPEEDS CAUSED BY 1) CHAFED ABS WHEEL SPEED SENSOR WIRES ON ROTATING PARTS OR 2) A DAMAGED COMPONENT AT THE WHEEL END THAT GENERATES A CERTAIN TYPE OF ERRATIC SENSOR SIGNAL. Recall Details 1999 INTERNATIONAL HARVESTER 9000 Recall - STEERING:LINKAGES:TIE ROD ASSEMBLY Problem: VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH AXLE ASSEMBLIES WHICH MAY HAVE BEEN MANUFACTURED WITH TRW MODEL 20EDL BALL SOCKETS/DRAG LINKS. THE TIE ROD BALL-SOCKET BEARINGS HAVE A BELOW SPECIFICATION CASE DEPTH AND/OR HARDNESS WHICH CAN LEAD TO PREMATURE WEAR OUT OF THE SOCKET IN SOME APPLICATIONS. Recall Details 1999 INTERNATIONAL HARVESTER 9000 Recall - SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP Problem: VEHICLE DESCRIPTION: SCHOOL AND HEAVY DUTY TRUCKS BUILT WITH BENDIX AIR ABS. THE ABS SENSOR WIRES ON ROTATING PARTS CHAFES WHICH CAN LEAD TO A FALSE SIGNAL BEING SENT TO THE BENDIX ABS ELECTRONIC CONTROL UNIT (ECU). Recall Details 1999 INTERNATIONAL HARVESTER 9000 Recall - SERVICE BRAKES, AIR:ANTILOCK Problem: VEHICLE DESCRIPTION: MEDIUM AND HEAVY DUTY TRUCKS BUILT WITH BENDIX AIR ABS WITH AN EC-17 1030R ELECTRONIC CONTROL UNIT (ECU). THERE HAVE BEEN REPORTS OF UNWANTED ABS ACTIVATION AT LOW SPEEDS CAUSED BY 1) CHAFED ABS WHEEL SPEED SENSOR WIRES ON ROTATING PARTS OR 2) A DAMAGED COMPONENT AT THE WHEEL END THAT GENERATES A CERTAIN TYPE OF ERRATIC SENSOR SIGNAL. Recall Details 1999 INTERNATIONAL HARVESTER 9000 Recall - EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH Problem: VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS. THE BRAKE LIGHT SWITCH AND THE CRUISE CONTROL SWITCH ARE MOUNTED IN SUCH A WAY AS TO ALLOW MOISTURE WITHIN THE AIR BRAKE SYSTEM TO COLLECT INSIDE THE SWITCHES. IF THE MOISTURE IN THE SWITCHES FREEZES, THE BRAKE LIGHTS MAY NOT FUNCTION AND THE CRUISE CONTROL MIGHT NOT DISENGAGE WHEN THE BRAKE PEDAL IS DEPRESSED. Recall Details 1999 INTERNATIONAL HARVESTER 9000 Recall - VEHICLE SPEED CONTROL Problem: VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS. THE BRAKE LIGHT SWITCH AND THE CRUISE CONTROL SWITCH ARE MOUNTED IN SUCH A WAY AS TO ALLOW MOISTURE WITHIN THE AIR BRAKE SYSTEM TO COLLECT INSIDE THE SWITCHES. IF THE MOISTURE IN THE SWITCHES FREEZES, THE BRAKE LIGHTS MAY NOT FUNCTION AND THE CRUISE CONTROL MIGHT NOT DISENGAGE WHEN THE BRAKE PEDAL IS DEPRESSED. Recall Details 1999 INTERNATIONAL HARVESTER 9000 Recall - SERVICE BRAKES, AIR:SUPPLY:CHECK VALVE Problem: ON CERTAIN MEDIUM AND HEAVY DUTY TRUCKS, A BRASS FITTING CONNECTS THE DOUBLE CHECK VALVE TO THE BRAKE RELAY VALVE. WITH CERTAIN INPUTS TO THE VEHICLE, THE WEIGHT OF THE CHECK VALVE ON THE FITTING CAN CAUSE THE ASSEMBLY TO RESONATE. THE SUBJECT VIBRATION CAN CAUSE EXCESSIVE STRAIN LEVELS IN THE FITTING, WHICH COULD EVENTUALLY FATIGUE AND FAIL. Recall Details 1999 INTERNATIONAL HARVESTER 9000 Recall - SERVICE BRAKES, AIR Problem: ON CERTAIN HEAVY DUTY TRUCKS, A BRASS FITTING CONNECTS THE DOUBLE CHECK VALVE TO THE BRAKE RELAY VALVE. WITH CERTAIN INPUTS TO THE VEHICLE, THE WEIGHT OF THE CHECK VALVE ON THE FITTING CAN CAUSE THE ASSEMBLY TO RESONATE. THE SUBJECT VIBRATION CAN CAUSE EXCESSIVE STRAIN LEVELS IN THE FITTING, WHICH COULD EVENTUALLY FATIGUE AND FAIL.  Recall Details 1999 INTERNATIONAL HARVESTER 9000 Recall - SUSPENSION:FRONT:HUB Problem: ON CERTAIN HEAVY AND MEDIUM DUTY TRUCKS AND BUSES EQUIPPED WITH TRUCK HUB UNITS MANUFACTURED BY SKF EXCLUSIVELY FOR USE ON ARVINMERITOR'S FF98X SERIES NON-DRIVE STEER AXLES, THE HUB UNIT BEARINGS CAN WEAR PREMATURELY. Recall Details 1998 INTERNATIONAL HARVESTER 9000 Recall - SUSPENSION:FRONT:HUB Problem: ON CERTAIN HEAVY AND MEDIUM DUTY TRUCKS AND BUSES EQUIPPED WITH TRUCK HUB UNITS MANUFACTURED BY SKF EXCLUSIVELY FOR USE ON ARVINMERITOR'S FF98X SERIES NON-DRIVE STEER AXLES, THE HUB UNIT BEARINGS CAN WEAR PREMATURELY. Recall Details 1998 INTERNATIONAL HARVESTER 9000 Recall - SERVICE BRAKES, AIR Problem: ON CERTAIN HEAVY DUTY TRUCKS, A BRASS FITTING CONNECTS THE DOUBLE CHECK VALVE TO THE BRAKE RELAY VALVE. WITH CERTAIN INPUTS TO THE VEHICLE, THE WEIGHT OF THE CHECK VALVE ON THE FITTING CAN CAUSE THE ASSEMBLY TO RESONATE. THE SUBJECT VIBRATION CAN CAUSE EXCESSIVE STRAIN LEVELS IN THE FITTING, WHICH COULD EVENTUALLY FATIGUE AND FAIL.  Recall Details 1998 INTERNATIONAL HARVESTER 9000 Recall - SERVICE BRAKES, AIR:SUPPLY:CHECK VALVE Problem: ON CERTAIN MEDIUM AND HEAVY DUTY TRUCKS, A BRASS FITTING CONNECTS THE DOUBLE CHECK VALVE TO THE BRAKE RELAY VALVE. WITH CERTAIN INPUTS TO THE VEHICLE, THE WEIGHT OF THE CHECK VALVE ON THE FITTING CAN CAUSE THE ASSEMBLY TO RESONATE. THE SUBJECT VIBRATION CAN CAUSE EXCESSIVE STRAIN LEVELS IN THE FITTING, WHICH COULD EVENTUALLY FATIGUE AND FAIL. Recall Details 1998 INTERNATIONAL HARVESTER 9000 Recall - SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP Problem: VEHICLE DESCRIPTION: SCHOOL AND HEAVY DUTY TRUCKS BUILT WITH BENDIX AIR ABS. THE ABS SENSOR WIRES ON ROTATING PARTS CHAFES WHICH CAN LEAD TO A FALSE SIGNAL BEING SENT TO THE BENDIX ABS ELECTRONIC CONTROL UNIT (ECU). Recall Details 1998 INTERNATIONAL HARVESTER 9000 Recall - EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH Problem: VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS. THE BRAKE LIGHT SWITCH AND THE CRUISE CONTROL SWITCH ARE MOUNTED IN SUCH A WAY AS TO ALLOW MOISTURE WITHIN THE AIR BRAKE SYSTEM TO COLLECT INSIDE THE SWITCHES. IF THE MOISTURE IN THE SWITCHES FREEZES, THE BRAKE LIGHTS MAY NOT FUNCTION AND THE CRUISE CONTROL MIGHT NOT DISENGAGE WHEN THE BRAKE PEDAL IS DEPRESSED. Recall Details 1998 INTERNATIONAL HARVESTER 9000 Recall - VEHICLE SPEED CONTROL Problem: VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS. THE BRAKE LIGHT SWITCH AND THE CRUISE CONTROL SWITCH ARE MOUNTED IN SUCH A WAY AS TO ALLOW MOISTURE WITHIN THE AIR BRAKE SYSTEM TO COLLECT INSIDE THE SWITCHES. IF THE MOISTURE IN THE SWITCHES FREEZES, THE BRAKE LIGHTS MAY NOT FUNCTION AND THE CRUISE CONTROL MIGHT NOT DISENGAGE WHEN THE BRAKE PEDAL IS DEPRESSED. Recall Details 1998 INTERNATIONAL HARVESTER 9000 Recall - SERVICE BRAKES, AIR:ANTILOCK Problem: VEHICLE DESCRIPTION: MEDIUM AND HEAVY DUTY TRUCKS BUILT WITH BENDIX AIR ABS WITH AN EC-17 1030R ELECTRONIC CONTROL UNIT (ECU). THERE HAVE BEEN REPORTS OF UNWANTED ABS ACTIVATION AT LOW SPEEDS CAUSED BY 1) CHAFED ABS WHEEL SPEED SENSOR WIRES ON ROTATING PARTS OR 2) A DAMAGED COMPONENT AT THE WHEEL END THAT GENERATES A CERTAIN TYPE OF ERRATIC SENSOR SIGNAL. Recall Details 1998 INTERNATIONAL HARVESTER 9000 Recall - SERVICE BRAKES, AIR:ANTILOCK Problem: VEHICLE DESCRIPTION: TRACTORS BUILT WITH BENDIX AIR ABS WITH AN EC-17 1030R ELECTRONIC CONTROL UNIT (ECU). THERE HAVE BEEN REPORTS OF UNWANTED ABS ACTIVATION AT LOW SPEEDS CAUSED BY 1) CHAFED ABS WHEEL SPEED SENSOR WIRES ON ROTATING PARTS OR 2) A DAMAGED COMPONENT AT THE WHEEL END THAT GENERATES A CERTAIN TYPE OF ERRATIC SENSOR SIGNAL. Recall Details