MACK CV Recalls - View the latest MACK CV Recalls from the NHTSA

Auto Recalls For Consumers

by Mack Trucks, Inc.

MACK CV RECALLS - (46 Recalls Found)

Find your vehicle listed below. Results are sorted year from newest to oldest. Select the desired vehicle to view the complete details. Information provided by the National Highway Traffic Safety Administration.

2008 MACK CV Recall - PARKING BRAKE

Problem: ON CERTAIN TRUCKS EQUIPPED WITH BENDIX SR-7 SPRING BRAKE MODULATING VALVES, THE INTERNAL RUBBER CHECK VALVE MAY LEAK CAUSING A DELAY IN THE APPLICATION OF THE SPRING BRAKES TO PARK THE VEHICLE AFTER THE OPERATOR PULLS THE DASH VALVE BUTTON. Recall Details

2008 MACK CV Recall - SERVICE BRAKES, AIR:SUPPLY:CHECK VALVE

Problem: ON CERTAIN TRUCKS EQUIPPED WITH PARKER SINGLE CHECK VALVES (SCV) PROVIDED BY BENDIX. THE DEFECT EXISTS IN THE PARKER SCV THAT CONNECTS WITH THE SUPPLY PORT OF THE SR-7 SPRING BRAKE MODULATING VALVE. AFTER PROLONGED USE OF THE PARKER SCV, THE VALVE BODY RETAINER MAY BECOME EXCESSIVELY WORN AND EVENTUALLY BREAK APART. PIECES OF THE PARKER SCV CAN BECOME LODGED INSIDE THE SR-7 SPRING BRAKE MODULATING VALVE, POTENTIALLY CAUSING EITHER LEAKAGE OUT OF THE SR-7 VALVE OR PREVENTING AIR FROM PROPERLY EXHAUSTING FROM THE SR-7 VALVE. Recall Details

2008 MACK CV Recall - TRAILER HITCHES:FIFTH WHEEL ASSEMBLY

Problem: ON CERTAIN TRUCKS EQUIPPED WITH A SAF HOLLAND SIMPLEX FIFTH WHEEL, THE LEVER ARM PIVOT BOLT MAY HAVE BEEN OVER TIGHTENED. AN OVER TIGHTENED PIVOT BOLT CAN DISTORT THE PIVOT BOLT SPACER SLEEVE, WHICH MAY PREVENT THE FIFTH WHEEL LATCH JAW FROM CLOSING AND LATCHING SECURELY AROUND THE TRAILER KING PIN. Recall Details

2007 MACK CV Recall - TRAILER HITCHES:FIFTH WHEEL ASSEMBLY

2007 MACK CV Recall - EXTERIOR LIGHTING:TURN SIGNAL:FLASHER UNIT

Problem: Mack Trucks Inc. (Mack) is recalling certain model year 2010-2014 CHU, CXU, and MRU, 2007 CT and CV, 2008-2014 GU, and 2011-2014 LEU, and TD trucks manufactured February 28, 2006, through November 8, 2013, and equipped Hamsar Electronic Flasher. The hazard warning lights may fail. Recall Details

2007 MACK CV Recall - SERVICE BRAKES, AIR

Problem: CERTAIN TRUCKS EQUIPPED WITH A FRONT GLAD HAND OPTION FAIL TO COMPLY WITH THE PERFORMANCE CRITERIA REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, 'AIR BRAKE SYSTEMS.' Recall Details

2007 MACK CV Recall - SUSPENSION

Problem: ON CERTAIN TRUCKS EQUIPPED WITH A 46K POUND CHALMERS REAR SUSPENSION, THE ADJUSTABLE TORQUE RODS USED ON THE SUSPENSION MAY BE BRITTLE. Recall Details

2007 MACK CV Recall - PARKING BRAKE

2007 MACK CV Recall - SERVICE BRAKES, AIR:SUPPLY:CHECK VALVE

2007 MACK CV Recall - PARKING BRAKE:CONVENTIONAL:AIR

Problem: ON CERTAIN TRUCKS EQUIPPED WITH SR-7 BENDIX BRAKE VALVES, THE CHECK VALVE INSIDE THE VALVE CAVITY MAY NOT PROPERLY SET, CAUSING INTERNAL AIR LEAKAGE. IF THE CHECK VALVE DOES NOT PROPERLY SEAT, THE RESULTING LEAKAGE CAN CAUSE A DELAY IN THE APPLICATION OF THE SPRING BRAKES TO PARK THE VEHICLE AFTER OPERATOR PULLS THE DASH VALVE BUTTON. Recall Details

2007 MACK CV Recall - SERVICE BRAKES, AIR

Problem: ON CERTAIN TRUCKS EQUIPPED WITH A LEGRIS AIR MANIFOLD, THE BRASS PUSH-TO-CONNECT CARTRIDGE MAY UNEXPECTEDLY SEPARATE FROM THE PLASTIC HOUSING. Recall Details

2006 MACK CV Recall - STEERING:LINKAGES:ARM:IDLER AND ATTACHMENT

Problem: ON CERTAIN TRUCKS, THE BOLT THAT ATTACHES THE PITMAN ARM TO THE STEERING GEAR MAY NOT BE TIGHTENED PROPERLY. Recall Details

2006 MACK CV Recall - SERVICE BRAKES, AIR

2006 MACK CV Recall - SERVICE BRAKES, AIR:SUPPLY:CHECK VALVE

2006 MACK CV Recall - PARKING BRAKE

2006 MACK CV Recall - TRAILER HITCHES:FIFTH WHEEL ASSEMBLY

2005 MACK CV Recall - POWER TRAIN:AXLE ASSEMBLY

Problem: MACK IS RECALLING 10,300 MODEL YEAR 2004 AND 2005 CL, CV, DM, LE, AND RB AND MODEL YEAR 2004 RD HEAVY TRUCKS MANUFACTURED FROM OCTOBER 1, 2003 THROUGH SEPTEMBER 30, 2004, EQUIPPED WITH AXLE BEAMS MANUFACTURED BY BHARAT FORGE. THE AXLE BEAM MAY HAVE TRANSVERSE SHEAR LINES ON THE BOTTOM OF THE AXLE FROM THE TRIMMING PROCESS. Recall Details

2005 MACK CV Recall - SERVICE BRAKES, AIR:SUPPLY:CHECK VALVE

2005 MACK CV Recall - SERVICE BRAKES, AIR

2005 MACK CV Recall - SUSPENSION

Problem: ON CERTAIN HEAVY DUTY CLASS 8 TRUCKS EQUIPPED WITH HOLLAND AIR SUSPENSION SYSTEMS, A TRANSVERSE BEAM CASTING MAY FRACTURE UNDER NORMAL LOADS. IF A CASTING BREAKS WHEN THE VEHICLE IS TRAVELING ON A ROADWAY THERE IS THE POTENTIAL FOR PIECES OF THE CASTING TO BECOME PROJECTILES AND THE SUSPENSION'S TRANSVERSE BEAM MAY DROP DOWN LOW ENOUGH TO CONTACT THE ROAD SURFACE. Recall Details

2004 MACK CV Recall - STEERING

Problem: ON CERTAIN HEAVY-DUTY, CLASS 8 TRUCKS, THE LOWER AND UPPER STEERING SHAFT PINCH BOLTS WERE IMPROPERLY TIGHTENED. Recall Details

2004 MACK CV Recall - SUSPENSION

2004 MACK CV Recall - SERVICE BRAKES, AIR:SUPPLY:CHECK VALVE

2004 MACK CV Recall - SERVICE BRAKES, AIR:DISC:CHAMBER

Problem: CERTAIN TRUCKS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, "AIR BRAKE SYSTEMS." THE FRONT BRAKE CHAMBER ON SOME 18,000 LB. AND 20,000 LB FRONT AXLE ASSEMBLIES IS TOO SMALL TO MEET STOPPING DISTANCE REQUIREMENTS. Recall Details

2004 MACK CV Recall - POWER TRAIN:AXLE ASSEMBLY

Problem: MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2002 THROUGH 2004 CL, CV, LE, MR, RB, RD, AND MODEL YEAR 2003 THROUGH 2004 DM HEAVY TRUCKS MANUFACTURED FROM FEBRUARY 1, 2002 THROUGH SEPTEMBER 30, 2003, EQUIPPED WITH AXLE BEAMS MANUFACTURED BY BHARAT FORGE. THE AXLE BEAM MAY HAVE TRANSVERSE SHEAR LINES ON THE BOTTOM OF THE AXLE FROM THE TRIMMING PROCESS. Recall Details

2003 MACK CV Recall - POWER TRAIN:AXLE ASSEMBLY

2003 MACK CV Recall - SERVICE BRAKES, AIR:SUPPLY:CHECK VALVE

Problem: CERTAIN HEAVY DUTY VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, "AIR BRAKE SYSTEMS." IMPROPER SEATING OF THE CHECK VALVE RETAINER IN THE BRASS FITTING HOUSING HAS OCCURRED. IT IS POSSIBLE FOR THE AIR BRAKE SYSTEM PRESSURE TO PUSH THE CHECK VALVE INTERNAL PARTS INTO THE PRIMARY SYSTEM RESERVOIR AND A VEHICLE OPERATOR WOULD NOT KNOW THAT THIS HAS HAPPENED. Recall Details

2003 MACK CV Recall - FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY

Problem: ON CERTAIN CHASSIS EQUIPPED WITH DEFIANCE METAL FUEL TANK SUPPORT BRACKET ASSEMBLIES, THE FUEL TANK BRACKET WAS NOT WELDED PER SPECIFICATION. THIS CAN CAUSE THE FUEL TANK TO SEPARATE FROM THE CHASSIS DURING ASSEMBLY OPERATION. Recall Details

2003 MACK CV Recall - SERVICE BRAKES, AIR:DISC:CHAMBER

2003 MACK CV Recall - FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:MOUNTING

Problem: ON CERTAIN TRUCKS, THE FUEL TANK MOUNTING STRAP WAS NOT WELDED TO SPECIFICATIONS AND MAY FAIL. THE FUEL TANK STRAP SUPPORTS AND FASTENS THE STEPS FOR THE OPERATOR AND PASSENGER TO ENTER AND EXIT THE CAB. Recall Details

2002 MACK CV Recall - SUSPENSION:REAR

Problem: ON CERTAIN HEAVY DUTY TRUCKS EQUIPPED WITH DANA SPICER TANDEM DRIVE AXLE MODELS DS463, AN UNDERSIZED ATTACHMENT WELD MAY FRACTURE WITHOUT WARNING. Recall Details

2002 MACK CV Recall - SERVICE BRAKES, AIR:DRUM

Problem: ON CERTAIN CLASS 8 CHASSIS BUILT WITH HENDRICKSON LIFT AXLES WHICH CONTAINED WEBB BRAKE DRUMS, THE BRAKE DRUMS COULD EXPERIENCE PREMATURE CRACK OF THE BRAKING SURFACE RESULTING IN REDUCTION OR COMPLETE LOSS OF BRAKING ON THAT WHEEL END OR LOSS OF BRAKE DRUM PIECES. Recall Details

2002 MACK CV Recall - POWER TRAIN:AXLE ASSEMBLY

2001 MACK CV Recall - SERVICE BRAKES, AIR:DRUM

2001 MACK CV Recall - SERVICE BRAKES, AIR:SUPPLY:CHECK VALVE

Problem: ON CERTAIN TRUCKS EQUIPPED WITH MERITOR WABCO PNEUMATIC ANITLOCK BRAKE SYSTEM (ABS) VALVE PACKAGES, THE ASSEMBLY BOLTS ON THESE VALVE PACKAGES WERE NOT TIGHTENED CORRECTLY. Recall Details

2001 MACK CV Recall - SERVICE BRAKES, AIR:CONTROLS

Problem: VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH CERTAIN MERITOR-WABCO BRAKE SYSTEM TWO AND FOUR PORT RELAY VALVES. THE VALVE MAY STICK OPEN WHEN A HIGH-PRESSURE APPLICATION IS RELEASED. Recall Details

2001 MACK CV Recall - SUSPENSION:FRONT:SPRINGS:COIL SPRINGS

Problem: VEHICLE DESCRIPTION: CLASS A HEAVY DUTY TRUCKS WITH 18,000 LB. FRONT AXLES MAY HAVE FRONT SPRINGS INSTALLED THAT ARE RATED FOR THE 14,600 LB. FRONT AXLE. Recall Details

2001 MACK CV Recall - STEERING:HYDRAULIC POWER ASSIST:PUMP

Problem: VEHICLE DESCRIPTION: TRUCKS EQUIPPED WITH E-TECH ENGINES. A CONDITION EXISTS ON THE AUXILIARY DRIVE SHAFT OF THE E-TECH ENGINE THAT CAUSES THE LOSS OF POWER STEERING ON VEHICLES WHERE THE POWER STEERING PUMP IS MOUNTED OFF THE FRONT OF THE ENGINE. Recall Details

2001 MACK CV Recall - SUSPENSION:REAR

Problem: ON CERTAIN HEAVY DUTY TRUCKS EQUIPPED WITH DANA SPICER TANDEM DRIVE AXLE MODELS DS463, AN UNDERSIZED ATTACHMENT WELD MAY FRACTURE WITHOUT WARNING. Recall Details

2000 MACK CV Recall - SUSPENSION:REAR

Problem: ON CERTAIN HEAVY DUTY TRUCKS EQUIPPED WITH DANA SPICER TANDEM DRIVE AXLE MODELS DS463, AN UNDERSIZED ATTACHMENT WELD MAY FRACTURE WITHOUT WARNING. Recall Details

2000 MACK CV Recall - SUSPENSION:FRONT:SPRINGS:COIL SPRINGS

Problem: VEHICLE DESCRIPTION: CLASS A HEAVY DUTY TRUCKS WITH 18,000 LB. FRONT AXLES MAY HAVE FRONT SPRINGS INSTALLED THAT ARE RATED FOR THE 14,600 LB. FRONT AXLE. Recall Details

2000 MACK CV Recall - SERVICE BRAKES, AIR:CONTROLS

1999 MACK CV Recall - SUSPENSION:REAR

Problem: ON CERTAIN HEAVY DUTY TRUCKS EQUIPPED WITH DANA SPICER TANDEM DRIVE AXLE MODELS DS463, AN UNDERSIZED ATTACHMENT WELD MAY FRACTURE WITHOUT WARNING. Recall Details

1999 MACK CV Recall - STEERING:LINKAGES:TIE ROD ASSEMBLY

Problem: VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH TIE ROD ASSEMBLIES CONTAINING 24-DL MODEL BALL SOCKETS AND MANUFACTURED BY TRW. CERTAIN OF THE TIE ROD BALL-SOCKET BEARINGS HAVE A BELOW-SPECIFICATION CASE DEPTH AND/OR HARDNESS, WHICH CAN LEAD TO PREMATURE WEAR OF THE SOCKET. Recall Details

1998 MACK CV Recall - SUSPENSION:REAR

Problem: ON CERTAIN HEAVY DUTY TRUCKS EQUIPPED WITH DANA SPICER TANDEM DRIVE AXLE MODELS DS463, AN UNDERSIZED ATTACHMENT WELD MAY FRACTURE WITHOUT WARNING. Recall Details