|
Problem: Volvo Trucks North America (Volvo Trucks) is recalling certain 2022-2023 VN L4 and L4E (Sleeper) trucks. The cabinets may be improperly secured to the walls due to the bolts being installed without the required washers. Recall Details
Problem: Volvo Trucks North America (Volvo Trucks) is recalling certain 2022-2023 VN L4 and L4E (Sleeper) trucks. The cabinets may be improperly secured to the walls due to the bolts being installed without the required washers. Recall Details
Problem: Volvo Trucks North America (Volvo Trucks) is recalling certain 2022-2023 VN tractor trailers. The steering gears may have been assembled incorrectly, which can cause the gear to fracture. Recall Details
Problem: Volvo Trucks North America (Volvo Trucks) is recalling certain 2023 Volvo VN vehicles. The engine control module (ECM) may experience an internal electrical short-circuit, causing the engine to stall. Recall Details
Problem: Volvo Trucks North America (Volvo Trucks) is recalling certain 2022-2023 VN tractor trailers. The steering gears may have been assembled incorrectly, which can cause the gear to fracture. Recall Details
Problem: Volvo Trucks North America (Volvo Trucks) is recalling certain 2022-2023 VN L4 and L4E (Sleeper) trucks. The cabinets may be improperly secured to the walls due to the bolts being installed without the required washers. Recall Details
Problem: Volvo Trucks North America (Volvo Trucks) is recalling certain 2022-2023 VN L4 and L4E (Sleeper) trucks. The cabinets may be improperly secured to the walls due to the bolts being installed without the required washers. Recall Details
Problem: Volvo Trucks North America (Volvo) is recalling certain model year 2016 Volvo VN trucks manufactured on August 13, 2015. The affected vehicles are equipped with certain Cummins engines whose engine control module (ECM) may short circuit and blow a fuse resulting in the engine stalling without warning. Recall Details
Problem: Volvo Trucks North America (Volvo) is recalling certain model year 2016 VN trucks manufactured January 6, 2015, to January 15, 2015, equipped with certain Eaton Fuller FR-Series 10-speed manual transmissions. In the affected vehicles, when the transmission shift lever is moved from reverse to neutral, the reverse gear may stay engaged. When the transmission shift lever is moved from reverse to a forward gear position, the transmission may mechanically lock because both the reverse gear and forward gear are simultaneously engaged. Recall Details
Problem: Volvo Trucks North America (Volvo) is recalling certain model year 2009-2015 Volvo VN trucks manufactured April 14, 2008, to December 23, 2014. The affected vehicles may experience corrosion of the ball joints due to the seals being compromised, possibly resulting in accelerated wear and failure of the ball joint. Recall Details
Problem: Volvo Trucks North America (Volvo) is recalling certain model year 2009-2015 Volvo VN trucks manufactured April 14, 2008, to December 23, 2014. The affected vehicles may experience corrosion of the ball joints due to the seals being compromised, possibly resulting in accelerated wear and failure of the ball joint. Recall Details
Problem: Volvo Trucks North America (Volvo) is recalling certain model year 2009-2015 Volvo VN trucks manufactured April 14, 2008, to December 23, 2014. The affected vehicles may experience corrosion of the ball joints due to the seals being compromised, possibly resulting in accelerated wear and failure of the ball joint. Recall Details
Problem: Volvo Trucks North America (Volvo) is recalling certain model year 2009-2015 Volvo VN trucks manufactured April 14, 2008, to December 23, 2014. The affected vehicles may experience corrosion of the ball joints due to the seals being compromised, possibly resulting in accelerated wear and failure of the ball joint. Recall Details
Problem: Volvo Trucks North America (Volvo) is recalling certain model year 2009-2015 Volvo VN trucks manufactured April 14, 2008, to December 23, 2014. The affected vehicles may experience corrosion of the ball joints due to the seals being compromised, possibly resulting in accelerated wear and failure of the ball joint. Recall Details
Problem: Volvo Trucks North America (Volvo) is recalling certain model year 2009-2015 Volvo VN trucks manufactured April 14, 2008, to December 23, 2014. The affected vehicles may experience corrosion of the ball joints due to the seals being compromised, possibly resulting in accelerated wear and failure of the ball joint. Recall Details
Problem: Volvo is recalling certain model year 2002-2013 VHD and VN trucks, manufactured from August 4, 2000, through June 22, 2012, and equipped with bench passenger seats. The seat belt d-ring weld may not be sufficient enough to meet the seat belt pull test. Therefore, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 210, "Seat Belt Assembly Anchorages." Recall Details
Problem: Volvo Trucks North America (Volvo) is recalling certain model year 2009-2015 Volvo VN trucks manufactured April 14, 2008, to December 23, 2014. The affected vehicles may experience corrosion of the ball joints due to the seals being compromised, possibly resulting in accelerated wear and failure of the ball joint. Recall Details
Problem: Volvo Trucks North America (Volvo) is recalling certain model year 2009-2015 Volvo VN trucks manufactured April 14, 2008, to December 23, 2014. The affected vehicles may experience corrosion of the ball joints due to the seals being compromised, possibly resulting in accelerated wear and failure of the ball joint. Recall Details
Problem: Volvo is recalling certain model year 2002-2013 VHD and VN trucks, manufactured from August 4, 2000, through June 22, 2012, and equipped with bench passenger seats. The seat belt d-ring weld may not be sufficient enough to meet the seat belt pull test. Therefore, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 210, "Seat Belt Assembly Anchorages." Recall Details
Problem: Volvo is recalling certain model year 2002-2013 VHD and VN trucks, manufactured from August 4, 2000, through June 22, 2012, and equipped with bench passenger seats. The seat belt d-ring weld may not be sufficient enough to meet the seat belt pull test. Therefore, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 210, "Seat Belt Assembly Anchorages." Recall Details
Problem: Volvo Trucks North America (Volvo) is recalling certain model year 2009-2015 Volvo VN trucks manufactured April 14, 2008, to December 23, 2014. The affected vehicles may experience corrosion of the ball joints due to the seals being compromised, possibly resulting in accelerated wear and failure of the ball joint. Recall Details
Problem: Volvo Trucks North America (Volvo) is recalling certain model year 2009-2015 Volvo VN trucks manufactured April 14, 2008, to December 23, 2014. The affected vehicles may experience corrosion of the ball joints due to the seals being compromised, possibly resulting in accelerated wear and failure of the ball joint. Recall Details
Problem: Volvo Trucks North America (Volvo) is recalling certain model year 2009-2015 Volvo VN trucks manufactured April 14, 2008, to December 23, 2014. The affected vehicles may experience corrosion of the ball joints due to the seals being compromised, possibly resulting in accelerated wear and failure of the ball joint. Recall Details
Problem: Volvo Trucks North America (Volvo) is recalling certain model year 2009-2015 Volvo VN trucks manufactured April 14, 2008, to December 23, 2014. The affected vehicles may experience corrosion of the ball joints due to the seals being compromised, possibly resulting in accelerated wear and failure of the ball joint. Recall Details
Problem: Volvo is recalling certain model year 2002-2013 VHD and VN trucks, manufactured from August 4, 2000, through June 22, 2012, and equipped with bench passenger seats. The seat belt d-ring weld may not be sufficient enough to meet the seat belt pull test. Therefore, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 210, "Seat Belt Assembly Anchorages." Recall Details
Problem: VOLVO TRUCKS IS RECALLING CERTAIN MODEL YEAR 2009-2010 VNL, VT, AND 780 TRUCKS MANUFACTURED FROM MARCH 1, 2008 THROUGH FEBRUARY 6, 2009. THE BOTTOM TRACK THAT ATTACHES TO THE ARMS USED TO OPEN AND CLOSE THE WINDOW MAY DE-BOND, WHICH RESULTS IN THE GLASS COMING LOOSE AT THE BOTTOM. Recall Details
Problem: VOLVO TRUCKS IS RECALLING CERTAIN MODEL YEAR 2007 AND 2009 VHD, MODEL YEAR 2006 THROUGH 2010 VN, AND MODEL YEAR 2007 THROUGH 2009 VT TRUCKS MANUFACTURED FROM NOVEMBER 7, 2005, THROUGH OCTOBER 30, 2009, EQUIPPED WITH AN AIR RELEASE FIFTH WHEEL. THE INVERSION VALVE ON THE FRAME MAY BE ORIENTATED WHERE CONTAMINANTS CAN ENTER THE VALVE THROUGH THE EXHAUST PORT. AS A RESULT, THE BRAKE VALVE MAY CORRODE. Recall Details
Problem: VOLVO TRUCKS IS RECALLING CERTAIN MODEL YEAR 2009-2010 VNL, VT, AND 780 TRUCKS MANUFACTURED FROM MARCH 1, 2008 THROUGH FEBRUARY 6, 2009. THE BOTTOM TRACK THAT ATTACHES TO THE ARMS USED TO OPEN AND CLOSE THE WINDOW MAY DE-BOND, WHICH RESULTS IN THE GLASS COMING LOOSE AT THE BOTTOM. Recall Details
Problem: VOLVO TRUCKS IS RECALLING CERTAIN MODEL YEAR 2007 AND 2009 VHD, MODEL YEAR 2006 THROUGH 2010 VN, AND MODEL YEAR 2007 THROUGH 2009 VT TRUCKS MANUFACTURED FROM NOVEMBER 7, 2005, THROUGH OCTOBER 30, 2009, EQUIPPED WITH AN AIR RELEASE FIFTH WHEEL. THE INVERSION VALVE ON THE FRAME MAY BE ORIENTATED WHERE CONTAMINANTS CAN ENTER THE VALVE THROUGH THE EXHAUST PORT. AS A RESULT, THE BRAKE VALVE MAY CORRODE. Recall Details
Problem: Volvo is recalling certain model year 2002-2013 VHD and VN trucks, manufactured from August 4, 2000, through June 22, 2012, and equipped with bench passenger seats. The seat belt d-ring weld may not be sufficient enough to meet the seat belt pull test. Therefore, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 210, "Seat Belt Assembly Anchorages." Recall Details
Problem: Volvo Trucks North America (Volvo) is recalling certain model year 2009-2015 Volvo VN trucks manufactured April 14, 2008, to December 23, 2014. The affected vehicles may experience corrosion of the ball joints due to the seals being compromised, possibly resulting in accelerated wear and failure of the ball joint. Recall Details
Problem: Volvo Trucks North America (Volvo) is recalling certain model year 2009-2015 Volvo VN trucks manufactured April 14, 2008, to December 23, 2014. The affected vehicles may experience corrosion of the ball joints due to the seals being compromised, possibly resulting in accelerated wear and failure of the ball joint. Recall Details
Problem: Volvo is recalling certain model year 2002-2013 VHD and VN trucks, manufactured from August 4, 2000, through June 22, 2012, and equipped with bench passenger seats. The seat belt d-ring weld may not be sufficient enough to meet the seat belt pull test. Therefore, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 210, "Seat Belt Assembly Anchorages." Recall Details
Problem: VOLVO TRUCKS IS RECALLING CERTAIN MODEL YEAR 2007 AND 2009 VHD, MODEL YEAR 2006 THROUGH 2010 VN, AND MODEL YEAR 2007 THROUGH 2009 VT TRUCKS MANUFACTURED FROM NOVEMBER 7, 2005, THROUGH OCTOBER 30, 2009, EQUIPPED WITH AN AIR RELEASE FIFTH WHEEL. THE INVERSION VALVE ON THE FRAME MAY BE ORIENTATED WHERE CONTAMINANTS CAN ENTER THE VALVE THROUGH THE EXHAUST PORT. AS A RESULT, THE BRAKE VALVE MAY CORRODE. Recall Details
Problem: VOLVO TRUCKS IS RECALLING CERTAIN MODEL YEAR 2007 AND 2009 VHD, MODEL YEAR 2006 THROUGH 2010 VN, AND MODEL YEAR 2007 THROUGH 2009 VT TRUCKS MANUFACTURED FROM NOVEMBER 7, 2005, THROUGH OCTOBER 30, 2009, EQUIPPED WITH AN AIR RELEASE FIFTH WHEEL. THE INVERSION VALVE ON THE FRAME MAY BE ORIENTATED WHERE CONTAMINANTS CAN ENTER THE VALVE THROUGH THE EXHAUST PORT. AS A RESULT, THE BRAKE VALVE MAY CORRODE. Recall Details
Problem: ON CERTAIN HEAVY DUTY CLASS 8 TRUCKS EQUIPPED WITH DANA STEERING SHAFTS, THERE IS A POTENTIAL THAT THE STEERING SHAFT PINCH BOLT HOLE MAY BE INCORRECTLY LOCATED. THE PINCH BOLT FITS INTO A GROOVE IN THE STEERING GEAR INPUT SHAFT TO ENSURE THAT THE STEERING SHAFT DOES NOT SEPARATE FROM THE STEERING GEAR IF THE PINCH BOLT COMES LOOSE. Recall Details
Problem: Volvo is recalling certain model year 2002-2013 VHD and VN trucks, manufactured from August 4, 2000, through June 22, 2012, and equipped with bench passenger seats. The seat belt d-ring weld may not be sufficient enough to meet the seat belt pull test. Therefore, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 210, "Seat Belt Assembly Anchorages." Recall Details
Problem: Volvo is recalling certain model year 2002-2013 VHD and VN trucks, manufactured from August 4, 2000, through June 22, 2012, and equipped with bench passenger seats. The seat belt d-ring weld may not be sufficient enough to meet the seat belt pull test. Therefore, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 210, "Seat Belt Assembly Anchorages." Recall Details
Problem: ON CERTAIN TRUCKS EQUIPPED WITH ARVINMERITOR SERIES 145 AND 160 REAR DRIVE AXLES. SOME OF THE SPINDLES WERE OVERHEATED DURING THE HEAT TREAT PROCESS WHICH COULD RESULT IN A FRACTURE OF THE SPINDLE. Recall Details
Problem: VOLVO TRUCKS IS RECALLING CERTAIN MODEL YEAR 2007 AND 2009 VHD, MODEL YEAR 2006 THROUGH 2010 VN, AND MODEL YEAR 2007 THROUGH 2009 VT TRUCKS MANUFACTURED FROM NOVEMBER 7, 2005, THROUGH OCTOBER 30, 2009, EQUIPPED WITH AN AIR RELEASE FIFTH WHEEL. THE INVERSION VALVE ON THE FRAME MAY BE ORIENTATED WHERE CONTAMINANTS CAN ENTER THE VALVE THROUGH THE EXHAUST PORT. AS A RESULT, THE BRAKE VALVE MAY CORRODE. Recall Details
Problem: ON CERTAIN HEAVY DUTY CLASS 8 TRUCKS EQUIPPED WITH ACCURIDE ALUMINUM WHEELS, THE WHEELS WERE NOT PROPERLY PRE-STRESSED. THIS ALLOWS CRACKS TO DEVELOP OVER TIME. Recall Details
Problem: ON CERTAIN HEAVY DUTY CLASS 8 TRUCKS, EQUIPPED WITH HOLLAND AIR SUSPENSION SYSTEMS, A TRANSVERSE BEAM CASTING MAY FRACTURE UNDER NORMAL LOADS. IF A CASTING BREAKS WHEN THE VEHICLE IS TRAVELING ON A ROADWAY THERE IS THE POTENTIAL FOR PIECES OF THE CASTING TO BECOME PROJECTILES AND THE SUSPENSION?S TRANSVERSE BEAM MAY DROP DOWN LOW ENOUGH TO CONTACT THE ROAD SURFACE. Recall Details
Problem: Volvo is recalling certain model year 2002-2013 VHD and VN trucks, manufactured from August 4, 2000, through June 22, 2012, and equipped with bench passenger seats. The seat belt d-ring weld may not be sufficient enough to meet the seat belt pull test. Therefore, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 210, "Seat Belt Assembly Anchorages." Recall Details
Problem: ON CERTAIN TRUCKS EQUIPPED WITH VALEO WIPER SYSTEMS, THE WIPER MOTOR MAY BE SUSCEPTIVE TO SALT INTRUSION THAT COULD POSSIBLY LEAD TO A CONDITION WHERE THE CONNECTOR OVERHEATS TO A POINT WHERE THE CONNECTOR COULD IGNITE. Recall Details
Problem: Volvo is recalling certain model year 2002-2013 VHD and VN trucks, manufactured from August 4, 2000, through June 22, 2012, and equipped with bench passenger seats. The seat belt d-ring weld may not be sufficient enough to meet the seat belt pull test. Therefore, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 210, "Seat Belt Assembly Anchorages." Recall Details
Problem: ON CERTAIN TRUCKS, A MALFUNCTION IN THE SOLENOID VALVE MAY ALLOW AIR TO BE RELEASED TO FIFTH WHEEL LATCH WHEN THE PARK BRAKE IS ENGAGED. Recall Details
Problem: ON CERTAIN TRUCKS, THE BOLTS THAT RETAIN THE UNIVERSAL JOINT TO THE YOKE AT THE TRANSMISSION MAY NOT BE TIGHTENED CORRECTLY. Recall Details
Problem: ON CERTAIN HEAVY-DUTY CLASS 8 TRUCKS, THE ASSEMBLED ENGINE PRE-HEATER JUMPER WIRING HARNESS WAS INCORRECTLY ASSEMBLED. Recall Details
Problem: ON CERTAIN TRUCKS, A MALFUNCTION IN THE SOLENOID VALVE MAY ALLOW AIR TO BE RELEASED TO FIFTH WHEEL LATCH WHEN THE PARK BRAKE IS ENGAGED. Recall Details
Problem: Volvo is recalling certain model year 2002-2013 VHD and VN trucks, manufactured from August 4, 2000, through June 22, 2012, and equipped with bench passenger seats. The seat belt d-ring weld may not be sufficient enough to meet the seat belt pull test. Therefore, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 210, "Seat Belt Assembly Anchorages." Recall Details
Problem: ON CERTAIN TRUCKS EQUIPPED WITH VALEO WIPER SYSTEMS, THE WIPER MOTOR MAY BE SUSCEPTIVE TO SALT INTRUSION THAT COULD POSSIBLY LEAD TO A CONDITION WHERE THE CONNECTOR OVERHEATS TO A POINT WHERE THE CONNECTOR COULD IGNITE. Recall Details
Problem: Volvo is recalling certain model year 2002-2013 VHD and VN trucks, manufactured from August 4, 2000, through June 22, 2012, and equipped with bench passenger seats. The seat belt d-ring weld may not be sufficient enough to meet the seat belt pull test. Therefore, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 210, "Seat Belt Assembly Anchorages." Recall Details
Problem: ON CERTAIN TRUCKS, A MALFUNCTION IN THE SOLENOID VALVE MAY ALLOW AIR TO BE RELEASED TO FIFTH WHEEL LATCH WHEN THE PARK BRAKE IS ENGAGED. Recall Details
Problem: ON CERTAIN TRUCKS EQUIPPED WITH VALEO WIPER SYSTEMS, THE WIPER MOTOR MAY BE SUSCEPTIVE TO SALT INTRUSION THAT COULD POSSIBLY LEAD TO A CONDITION WHERE THE CONNECTOR OVERHEATS TO A POINT WHERE THE CONNECTOR COULD IGNITE. Recall Details
Problem: ON CERTAIN HEAVY DUTY CLASS 8 TRUCKS WITH VOLVO B-RIDE REAR SUSPENSION, THE FORWARD AND/OR REAR DRIVE AXLE UPPER AXLE SEAT COULD BREAK ALLOWING THE AFFECTED AXLE TO SHIFT OUT OF ALIGNMENT. Recall Details
Problem: ON CERTAIN HEAVY-DUTY CLASS 8 TRUCKS, THE ASSEMBLED ENGINE PRE-HEATER JUMPER WIRING HARNESS WAS INCORRECTLY ASSEMBLED. Recall Details
Problem: ON CERTAIN HEAVY DUTY CLASS 8 TRUCKS, THE FORWARD AND/OR REAR DRIVE AXLE UPPER AXLE SEAT CAN BREAK ALLOWING THE AXLE TO SHIFT OUT OF ALIGNMENT. Recall Details
Problem: ON CERTAIN TRUCKS EQUIPPED WITH VALEO WIPER SYSTEMS, THE WIPER MOTOR MAY BE SUSCEPTIVE TO SALT INTRUSION THAT COULD POSSIBLY LEAD TO A CONDITION WHERE THE CONNECTOR OVERHEATS TO A POINT WHERE THE CONNECTOR COULD IGNITE. Recall Details
Problem: ON CERTAIN TRUCKS EQUIPPED WITH VALEO WIPER SYSTEMS, THE WIPER MOTOR MAY BE SUSCEPTIVE TO SALT INTRUSION THAT COULD POSSIBLY LEAD TO A CONDITION WHERE THE CONNECTOR OVERHEATS TO A POINT WHERE THE CONNECTOR COULD IGNITE. Recall Details
Problem: ON SOME HEAVY DUTY CLASS 8 VEHICLES EQUIPPED WITH ARVINMERITOR AXLE ASSEMBLIES WHICH MAY HAVE BEEN MANUFACTURED WITH TRW MODEL 20EDL BALL SOCKETS, THE TIE ROD BALL-SOCKET BEARINGS HAVE A BELOW SPECIFICATION CASE DEPTH AND/OR HARDNESS WHICH CAN LEAD TO PREMATURE WEAR OUT OF THE SOCKET IN SOME APPLICATIONS. Recall Details
Problem: ON SOME HEAVY DUTY CLASS 8 VEHICLES EQUIPPED WITH ARVINMERITOR AXLE ASSEMBLIES WHICH MAY HAVE BEEN MANUFACTURED WITH TRW MODEL 20EDL BALL SOCKETS, THE TIE ROD BALL-SOCKET BEARINGS HAVE A BELOW SPECIFICATION CASE DEPTH AND/OR HARDNESS WHICH CAN LEAD TO PREMATURE WEAR OUT OF THE SOCKET IN SOME APPLICATIONS. Recall Details
Problem: VEHICLE DESCRIPTION: HEAVY DUTY CLASS 8 VEHICLES. UNDER CERTAIN OPERATING CONDITIONS, THE WEIGHT CERTIFICATION LABEL WHICH CONTAINS FRONT GROSS AXLE WEIGHT RATING (GAWR) INFORMATION PURSUANT TO THE REQUIREMENTS OF FMVSS NO. 120, "TIRE SELECTION AND RIMS FOR MOTOR VEHICLES OTHER THAN PASSENGER CARS," DOES NOT ACCURATELY REFLECT THE ACTUAL FRONT GROSS AXLE WEIGHT. Recall Details
Problem: VEHICLE DESCRIPTION: HEAVY DUTY CLASS 8 VEHICLES EQUIPPED WITH ARVINMERITOR AXLE ASSEMBLIES WHICH MAY HAVE BEEN MANUFACTURED WITH TRW MODEL 20EDL BALL SOCKETS. THE TIE ROD BALL-SOCKET BEARINGS HAVE A BELOW SPECIFICATION CASE DEPTH AND/OR HARDNESS WHICH CAN LEAD TO PREMATURE WEAR OUT OF THE SOCKET IN SOME APPLICATIONS. Recall Details
Problem: VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH MERITOR AIR BRAKE AUTOMATIC SLACK ADJUSTERS. SOME OF THE AUTOMATIC SLACK ADJUSTERS HAD INSUFFICIENT TORQUE APPLIED TO THE GUIDE PAWL CAP SCREW. Recall Details
Problem: VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH AN ESPAR COMPACT HEATER MOUNTED IN THE LUGGAGE COMPARTMENT. THE FUEL-METERING PUMP THAT SUPPLIES FUEL TO THE COMPACT HEATER IS NOT WIRED THROUGH A ROLLOVER PROTECTION SWITCH. THIS DOES NOT COMPLY WITH 49 CFR 393.77, "HEATERS." Recall Details
Problem: VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH HALDEX MANIFOLD DASH VALVES (MDV) USED IN TRACTOR AND TRAILER PARKING BRAKES. THESE VALVES DO NOT MEET THE REQUIREMENTS OF FMVSS NO. 121, "AIR BRAKE SYSTEMS." A LOSS OF THE ISOLATION OF THE TWO BRAKE SYSTEM CIRCUITS CAN RESULT IN THE LOSS OF SERVICE BRAKES WHEN THERE IS ANOTHER FAILURE OF ONE OF THE TWO BRAKE CIRCUITS. Recall Details
Problem: VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH AN ESPAR COMPACT HEATER MOUNTED IN THE LUGGAGE COMPARTMENT. THE FUEL-METERING PUMP THAT SUPPLIES FUEL TO THE COMPACT HEATER IS NOT WIRED THROUGH A ROLLOVER PROTECTION SWITCH. THIS DOES NOT COMPLY WITH 49 CFR 393.77, "HEATERS." Recall Details
Problem: VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH A FAL 8.0 FRONT STEER AXLE. THE UPPER STEERING ARM CAN FAIL WITHOUT WARNING. Recall Details
Problem: VEHICLE DESCRIPTION: CLASS 8 HEAVY DUTY TRUCKS. THE ELECTRONIC MODULE THAT CONTROLS THE DAYTIME RUNNING LIGHTS (DRL) AND HEADLIGHTS CAN FAIL WITHOUT WARNING RESULTING IN THE LOSS OF THE DRL AND HEADLIGHT FUNCTIONS. Recall Details
Problem: VEHICLE DESCRIPTION: CLASS 8 HEAVY DUTY TRUCKS. THE ELECTRONIC MODULE THAT CONTROLS THE DAYTIME RUNNING LIGHTS (DRL) AND HEADLIGHTS CAN FAIL WITHOUT WARNING RESULTING IN THE LOSS OF THE DRL AND HEADLIGHT FUNCTIONS. Recall Details
Problem: VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH AFTERMARKET ALUMINUM DUAL WHEELS, 22.5X8.25, ONE-PIECE, TUBELESS, SUPPLIED BY ACCURIDE/AKW. CERTAIN DESIGN REVISIONS COMBINED WITH PROCESS CONDITIONS CAUSED FATIGUE CRACKS IN THESE WHEELS. Recall Details
Problem: VEHICLE DESCRIPTION: HEAVY DUTY CLASS 8 VEHICLES. UNDER CERTAIN OPERATING CONDITIONS, THE WEIGHT CERTIFICATION LABEL WHICH CONTAINS FRONT GROSS AXLE WEIGHT RATING (GAWR) INFORMATION PURSUANT TO THE REQUIREMENTS OF FMVSS NO. 120, "TIRE SELECTION AND RIMS FOR MOTOR VEHICLES OTHER THAN PASSENGER CARS," DOES NOT ACCURATELY REFLECT THE ACTUAL FRONT GROSS AXLE WEIGHT. Recall Details
Problem: CERTAIN HEAVY DUTY CLASS 8 TRUCKS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 120, "TIRE SELECTION AND RIMS FOR MOTOR VEHICLES OTHER THAN PASSENGER CARS." THE WEIGHT CERTIFICATION LABEL WHICH CONTAINS FRONT GROSS AXLE WEIGHT RATING (GAWR) INFORMATION DOES NOT ACCURATELY REFLECT THE ACTUAL FRONT GROSS AXLE WEIGHT. Recall Details
Problem: VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH A FAL 8.0 FRONT STEER AXLE. THE UPPER STEERING ARM CAN FAIL WITHOUT WARNING. Recall Details
Problem: VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH AFTERMARKET ALUMINUM DUAL WHEELS, 22.5X8.25, ONE-PIECE, TUBELESS, SUPPLIED BY ACCURIDE/AKW. CERTAIN DESIGN REVISIONS COMBINED WITH PROCESS CONDITIONS CAUSED FATIGUE CRACKS IN THESE WHEELS. Recall Details
Problem: THE TRANSMISSION SHIFT CONTROL LEVER CAN BREAK OFF AT THE TRANSMISSION. Recall Details
Problem: VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS. THE RELAY THAT CONTROLS THE ELECTRICAL POWER TO THE WINDSHIELD WIPER MOTOR CAN FAIL. Recall Details
Problem: VEHICLE DESCRIPTION: CLASS 8 HEAVY DUTY TRUCKS. A WIRE THAT CONNECTS THE ENGINE CONTROL MODULE (ECU) TO THE AUTOMATIC BRAKING CONTROL SYSTEM (ABS) CONTROLLER IS MISSING. THE ENGINE BRAKE CAN LOCK UP THE REAR AXLE WHEELS ON A SLICK PAVEMENT, AND THE ABS WOULD NOT PREVENT THE LOCK UP. Recall Details
Problem: VEHICLE DESCRIPTION: CLASS 8 HEAVY DUTY TRUCKS. THE ELECTRONIC MODULE THAT CONTROLS THE DAYTIME RUNNING LIGHTS (DRL) AND HEADLIGHTS CAN FAIL WITHOUT WARNING RESULTING IN THE LOSS OF THE DRL AND HEADLIGHT FUNCTIONS. Recall Details
Problem: VEHICLE DESCRIPTION: CLASS 8 HEAVY DUTY TRUCKS. THE ELECTRONIC MODULE THAT CONTROLS THE DAYTIME RUNNING LIGHTS (DRL) AND HEADLIGHTS CAN FAIL WITHOUT WARNING RESULTING IN THE LOSS OF THE DRL AND HEADLIGHT FUNCTIONS. Recall Details
Problem: VEHICLE DESCRIPTION: HEAVY DUTY CLASS 8 VEHICLES. UNDER CERTAIN OPERATING CONDITIONS, THE WEIGHT CERTIFICATION LABEL WHICH CONTAINS FRONT GROSS AXLE WEIGHT RATING (GAWR) INFORMATION PURSUANT TO THE REQUIREMENTS OF FMVSS NO. 120, "TIRE SELECTION AND RIMS FOR MOTOR VEHICLES OTHER THAN PASSENGER CARS," DOES NOT ACCURATELY REFLECT THE ACTUAL FRONT GROSS AXLE WEIGHT. Recall Details
Problem: VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH HALDEX MANIFOLD DASH VALVES (MDV) USED IN TRACTOR AND TRAILER PARKING BRAKES. THESE VALVES DO NOT MEET THE REQUIREMENTS OF FMVSS NO. 121, "AIR BRAKE SYSTEMS." A LOSS OF THE ISOLATION OF THE TWO BRAKE SYSTEM CIRCUITS CAN RESULT IN THE LOSS OF SERVICE BRAKES WHEN THERE IS ANOTHER FAILURE OF ONE OF THE TWO BRAKE CIRCUITS. Recall Details
Problem: THE TRANSMISSION SHIFT CONTROL LEVER CAN BREAK OFF AT THE TRANSMISSION. Recall Details
|