http://www.arfc.org/rss/feeds/autos/eby/stl_lsThe latest automotive recalls from the National Highway Transportation Safety AdministrationThu, 21 Nov 2024 16:39:01 GMTen-us1440Copyright 2024, Eladrel Technologies, LLCAutomotiveON CERTAIN TRAILERS EQUIPPED WITH SEALCO SPRING BRAKE CONTROL VALVE ASSEMBLIES INCORPORATED IN ARVINMERITOR AXLES, PART NOS. 110700 AND 110800, THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.http://www.arfc.org/commercial/eby/stl_ls/recalls/000020374000110942000000094/recall.aspxMon, 12 May 2003 00:00:00 GMTON CERTAIN TRAILERS EQUIPPED WITH SEALCO SPRING BRAKE CONTROL VALVE ASSEMBLIES INCORPORATED IN ARVINMERITOR AXLES, PART NOS. 110700 AND 110800, THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.http://www.arfc.org/commercial/eby/stl_ls/recalls/000020374000110941000000094/recall.aspxMon, 12 May 2003 00:00:00 GMTON CERTAIN TRAILERS EQUIPPED WITH SEALCO SPRING BRAKE CONTROL VALVE ASSEMBLIES INCORPORATED IN ARVINMERITOR AXLES, PART NOS. 110700 AND 110800, THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.http://www.arfc.org/commercial/eby/stl_ls/recalls/000020374000110940000000094/recall.aspxMon, 12 May 2003 00:00:00 GMTON CERTAIN TRAILERS EQUIPPED WITH SEALCO SPRING BRAKE CONTROL VALVE ASSEMBLIES INCORPORATED IN ARVINMERITOR AXLES, PART NOS. 110700 AND 110800, THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.http://www.arfc.org/commercial/eby/stl_ls/recalls/000020374000110939000000094/recall.aspxMon, 12 May 2003 00:00:00 GMT