http://www.arfc.org/rss/feeds/autos/bmw/r1100The latest automotive recalls from the National Highway Transportation Safety AdministrationSun, 22 Dec 2024 01:23:04 GMTen-us1440Copyright 2024, Eladrel Technologies, LLCAutomotiveVEHICLE DESCRIPTION: MOTORCYCLES. A SHEET METAL PLATE MOUNTED TO THE FRONT OF THE FRAME BELOW THE INSTRUMENT CLUSTER CAN CAUSE THE WIRING HARNESS TO BE STRETCHED TOO TIGHT AS THE HANDLEBARS ARE TURNED FULLY TO ONE SIDE. IN ADDITION, THE WIRING HARNESS IS ATTACHED TO ANOTHER HARNESS WITH A CABLE TIE THAT IS PLACED TOO FAR FORWARD LIMITING THE HANDLEBAR MOVEMENT.http://www.arfc.org/motorcycles/bmw/r1100/recalls/000008473000075308000000207/recall.aspxWed, 31 Dec 1997 00:00:00 GMTVEHICLE DESCRIPTION: MOTORCYCLES. A SHEET METAL PLATE MOUNTED TO THE FRONT OF THE FRAME BELOW THE INSTRUMENT CLUSTER CAN CAUSE THE WIRING HARNESS TO BE STRETCHED TOO TIGHT AS THE HANDLEBARS ARE TURNED FULLY TO ONE SIDE. IN ADDITION, THE WIRING HARNESS IS ATTACHED TO ANOTHER HARNESS WITH A CABLE TIE THAT IS PLACED TOO FAR FORWARD LIMITING THE HANDLEBAR MOVEMENT.http://www.arfc.org/motorcycles/bmw/r1100/recalls/000008473000075309000000207/recall.aspxWed, 31 Dec 1997 00:00:00 GMTVEHICLE DESCRIPTION: MOTORCYCLES. A SHEET METAL PLATE MOUNTED TO THE FRONT OF THE FRAME BELOW THE INSTRUMENT CLUSTER CAN CAUSE THE WIRING HARNESS TO BE STRETCHED TOO TIGHT AS THE HANDLEBARS ARE TURNED FULLY TO ONE SIDE. IN ADDITION, THE WIRING HARNESS IS ATTACHED TO ANOTHER HARNESS WITH A CABLE TIE THAT IS PLACED TOO FAR FORWARD LIMITING THE HANDLEBAR MOVEMENT.http://www.arfc.org/motorcycles/bmw/r1100/recalls/000008473000075310000000207/recall.aspxWed, 31 Dec 1997 00:00:00 GMTCERTAIN SUSPENSION COMPONENTS CAN LOOSEN WHEN THE MOTORCYCLE IS RIDDEN HARD IN ROUGH OFF-ROAD CONDITIONS. THE RIGHT-HAND BEARING PIN IN THE REAR SWINGING ARM AND ALSO THE LOWER FLANGE NUT ON THE FRONT STRUT CAN BOTH LOOSEN.http://www.arfc.org/motorcycles/bmw/r1100/recalls/000007094000000785000000023/recall.aspxTue, 28 Jun 1994 00:00:00 GMTTHE POSITIVE BATTERY CABLE CONNECTOR MAY BE ATTACHED TO THE POSITIVE TERMINAL EXTENSION AT AN ANGLE WHICH MAY CAUSE CONTACT BETWEEN THE CONNECTOR AND THE BATTERY SUPPORT CAUSING AN ELECTRICAL SHORT.http://www.arfc.org/motorcycles/bmw/r1100/recalls/000006794000000785000000202/recall.aspxFri, 13 Aug 1993 00:00:00 GMT