http://www.arfc.org/rss/feeds/autos/suzuki/vl800The latest automotive recalls from the National Highway Transportation Safety AdministrationThu, 21 Nov 2024 11:49:59 GMTen-us1440Copyright 2024, Eladrel Technologies, LLCAutomotiveSUZUKI IS RECALLING CERTAIN MODEL YEAR 2008 THROUGH 2010 MOTORCYCLES MANUFACTURED FROM JULY 2007 THROUGH SEPTEMBER 2009, EQUIPPED WITH REGULATOR/RECTIFIER ASSEMBLIES, SUZUKI PART NUMBERS 32800-41F11, 32800-15H10, 32800-05H11, 32800-41G10, 32800-15H00, 32800-18H00, 32800-05G10, 32800-10G10, 32800-05H20, OR 32800-06G01. SOME REGULATOR/RECTIFIER ASSEMBLIES WERE PRODUCED WITH INSUFFICIENT ADHESION BETWEEN THE POWER MODULE (CIRCUIT BOARD) AND THE RECTIFIER CASE THAT CONTAINS A HEAT SINK TO DISSIPATE HEAT. DUE TO INSUFFICIENT ADHESION, HEAT GENERATED ON THE POWER MODULE CIRCUIT BOARD CAN CAUSE THE CIRCUIT BOARD TO DEFORM, AND LIFT OF THE CASE.http://www.arfc.org/motorcycles/suzuki/vl800/recalls/000039698000678892000000203/recall.aspxWed, 23 Feb 2011 00:00:00 GMTSUZUKI IS RECALLING CERTAIN MODEL YEAR 2008 THROUGH 2010 MOTORCYCLES MANUFACTURED FROM JULY 2007 THROUGH SEPTEMBER 2009, EQUIPPED WITH REGULATOR/RECTIFIER ASSEMBLIES, SUZUKI PART NUMBERS 32800-41F11, 32800-15H10, 32800-05H11, 32800-41G10, 32800-15H00, 32800-18H00, 32800-05G10, 32800-10G10, 32800-05H20, OR 32800-06G01. SOME REGULATOR/RECTIFIER ASSEMBLIES WERE PRODUCED WITH INSUFFICIENT ADHESION BETWEEN THE POWER MODULE (CIRCUIT BOARD) AND THE RECTIFIER CASE THAT CONTAINS A HEAT SINK TO DISSIPATE HEAT. DUE TO INSUFFICIENT ADHESION, HEAT GENERATED ON THE POWER MODULE CIRCUIT BOARD CAN CAUSE THE CIRCUIT BOARD TO DEFORM, AND LIFT OF THE CASE.http://www.arfc.org/motorcycles/suzuki/vl800/recalls/000039698000657768000000203/recall.aspxWed, 23 Feb 2011 00:00:00 GMTSUZUKI IS RECALLING CERTAIN MODEL YEAR 2008 THROUGH 2010 MOTORCYCLES MANUFACTURED FROM JULY 2007 THROUGH SEPTEMBER 2009, EQUIPPED WITH REGULATOR/RECTIFIER ASSEMBLIES, SUZUKI PART NUMBERS 32800-41F11, 32800-15H10, 32800-05H11, 32800-41G10, 32800-15H00, 32800-18H00, 32800-05G10, 32800-10G10, 32800-05H20, OR 32800-06G01. SOME REGULATOR/RECTIFIER ASSEMBLIES WERE PRODUCED WITH INSUFFICIENT ADHESION BETWEEN THE POWER MODULE (CIRCUIT BOARD) AND THE RECTIFIER CASE THAT CONTAINS A HEAT SINK TO DISSIPATE HEAT. DUE TO INSUFFICIENT ADHESION, HEAT GENERATED ON THE POWER MODULE CIRCUIT BOARD CAN CAUSE THE CIRCUIT BOARD TO DEFORM, AND LIFT OF THE CASE.http://www.arfc.org/motorcycles/suzuki/vl800/recalls/000039698000497831000000203/recall.aspxWed, 23 Feb 2011 00:00:00 GMTON CERTAIN MOTORCYCLES, THE IGNITION SWITCH WIRING HARNESS MAY HAVE BEEN IMPROPERLY ROUTED AT THE TIME OF PRODUCTION. IF THE WIRING HARNESS IS NOT ROUTED PROPERLY, IT CAN RUB AGAINST THE CLUTCH CABLE/THROTTLE CABLE.http://www.arfc.org/motorcycles/suzuki/vl800/recalls/000022490000212573000000213/recall.aspxWed, 21 Dec 2005 00:00:00 GMTON CERTAIN MOTORCYCLES, THE IGNITION SWITCH WIRING HARNESS MAY HAVE BEEN IMPROPERLY ROUTED AT THE TIME OF PRODUCTION. IF THE WIRING HARNESS IS NOT ROUTED PROPERLY, IT CAN RUB AGAINST THE CLUTCH CABLE/THROTTLE CABLE.http://www.arfc.org/motorcycles/suzuki/vl800/recalls/000022490000212531000000213/recall.aspxWed, 21 Dec 2005 00:00:00 GMT