1990 WINNEBAGO CW825FW RECALL - #91V148000
RECALL FOR WHEELS
ROAD DEBRIS MAY ENTER AN OPENING IN THE REAR SUSPENSION TRAILING ARM AND DAMAGE THE BEARING SEAL.
Information provided by the National Highway Traffic Safety Administration.
•
Send to a friend
•
Hide Form
| Vehicle |
1990 WINNEBAGO CW825FW |
|
| Manufacturer |
WINNEBAGO IND., INC. |
| Manufactured between |
1/1/1990 - 12/1/1990 |
| Recalled on |
9/25/1991 |
| Influenced by |
WINNEBAGO IND., INC. |
| Owners Notified on |
11/13/1991 |
| # Affected |
160 |
| Recalled for |
WHEELS |
|
|
| Description |
ROAD DEBRIS MAY ENTER AN OPENING IN THE REAR SUSPENSION TRAILING ARM AND DAMAGE THE BEARING SEAL. |
| Consequences |
VEHICLE STABILITY MAY BE IMPAIRED UNDER CERTAIN ROADOR OPERATING CONDITIONS WHICH MAY CAUSE LOSS OF VEHICLE CONTROL. |
| Corrective action |
DRILL A 1/8 INCH VENT/DRAIN HOLE, CLEAN THE BEARING SEAL AREA, APPLY HEAVY WASHOUT RESISTANT GREASE BETWEEN THE HUB ASSEMBLY AND THE TRAILING ARM SURFACES, AND INSTALL A FOAM RUBBER PLUG INTO THE ANGLED OPENING AT INBOARD SIDE OF THE TRAILING ARM. |
| Notes |
SYSTEM: REAR WHEEL ASSEMBLY.VEHICLE DESCRIPTION: COMMERCIAL TRUCKS. |
| See also |
1990 WINNEBAGO CW825FW Recall for WHEELS, HUB
1990 WINNEBAGO CW825FW Recall for ELECTRICAL SYSTEM, HORN
1990 WINNEBAGO CW825FW Recall for SUSPENSION, FRONT, CONTROL ARM
1990 WINNEBAGO CW825FW Recall for STEERING, RACK AND PINION
1990 WINNEBAGO CW825FW Recall for STEERING, GEAR BOX (OTHER THAN RACK AND PINION)
1990 WINNEBAGO CW825FW Recall for SUSPENSION, FRONT, SHOCK ABSORBER
|
|
|
|