|
Problem: BMW of North America, LLC (BMW) is recalling certain 2020 X5 sDrive 40i, X5 xDrive 40i and one X7 xDrive 40i vehicle. The starter motor may have an extra bolt that could potentially fall into the transmission housing and cause an engine stall. Recall Details
Problem: BMW of North America, LLC, (BMW) is recalling certain 2011-2013 X5 xDrive35i, X5 xDrive50i, X5 M and X5 xDrive35d vehicles, 2011-2014 X6 xDrive35i, X6 xDrive50i and X6M vehicles, and 2011 x6 ActiveHybrid Vehicles. Water and debris may enter the front driveshaft's universal joint, causing excessive wear and possibly resulting in the joint's failure. Recall Details
Problem: BMW of North America, LLC, (BMW) is recalling certain 2011-2013 X5 xDrive35i, X5 xDrive50i, X5 M and X5 xDrive35d vehicles, 2011-2014 X6 xDrive35i, X6 xDrive50i and X6M vehicles, and 2011 x6 ActiveHybrid Vehicles. Water and debris may enter the front driveshaft's universal joint, causing excessive wear and possibly resulting in the joint's failure. Recall Details
Problem: BMW IS RECALLING CERTAIN MODEL YEAR 2012 X5 XDRIVE 35I SPORTS ACTIVITY VEHICLES, MANUFACTURED FROM DECEMBER 19, 2011, THROUGH DECEMBER 21, 2011. DUE TO A MANUFACTURING ERROR, ENGAGEMENT OF THE TRANSMISSION?S PARKING LOCK MAY NOT OCCUR EVEN IF THE ?P? POSITION HAS BEEN SELECTED AND IS DISPLAYED. Recall Details
Problem: BMW of North America, LLC (BMW) is recalling certain model year 2011 X5 xDrive 35i, xDrive50i, X5 M, X6 xDrive35i, X6 xDrive50i, and X6 M vehicles manufactured April 5, 2010, to November 20, 2010, 2011 X5 xDrive35d diesel vehicles manufactured April 7, 2010, to November 20, 2010, and 2011 X6 Active Hybrid vehicles manufactured April 15, 2010, to November 17, 2010. The affected vehicles have a front driveshaft universal joint that may not seal out water and debris from getting in and damaging the joint, which could lead to its failure. Recall Details
Problem: BMW of North America, LLC, (BMW) is recalling certain 2011-2013 X5 xDrive35i, X5 xDrive50i, X5 M and X5 xDrive35d vehicles, 2011-2014 X6 xDrive35i, X6 xDrive50i and X6M vehicles, and 2011 x6 ActiveHybrid Vehicles. Water and debris may enter the front driveshaft's universal joint, causing excessive wear and possibly resulting in the joint's failure. Recall Details
Problem: CERTAIN PASSENGER VEHICLES MAY HAVE BEEN BUILT WITH AN INCORRECTLY MANUFACTURED AUTOMATIC TRANSMISSION PARKING PAWL GUIDE PLATE. Recall Details
Problem: CERTAIN PASSENGER VEHICLES MAY HAVE BEEN BUILT WITH AN INCORRECTLY MANUFACTURED AUTOMATIC TRANSMISSION PARKING PAWL GUIDE PLATE. Recall Details
Problem: ON CERTAIN SPORT UTILITY VEHICLES, THE BOLTS THAT HOLD THE FRONT DIFFERENTIAL, THE RIGHT OUTPUT SHAFT HOUSING FLANGE AT THE ENGINE, AND THE RIGHT-HAND ENGINE SUPPORT MAY BE INSUFFICIENTLY TIGHTENED. Recall Details
Problem: ON CERTAIN PASSENGER VEHICLES EQUIPPED WITH 8 AND 12 CYLINDER ENGINES, THE DIGITAL ENGINE MANAGEMENT CONTROL (EMC) UNITS WERE NOT PRODUCED ACCORDING TO SPECIFICATIONS. Recall Details
Problem: ON CERTAIN PASSENGER VEHICLES WITH 3.0 L ENGINES AND MANUAL TRANSMISSIONS, IF THE VEHICLE IS IN FIRST GEAR, AND MOVING SLOWLY, WITH THE ACCELERATOR PEDAL HELD IN A CONSTANT POSITION OF LOW ENGINE SPEED AND WITH THE CLUTCH PEDAL HELD IN A PARTIALLY DEPRESSED POSITION, ENGINE SPEED MAY INCREASE. Recall Details
Problem: VEHICLE DESCRIPTION: 4.4I SPORT UTILITY VEHICLES. OVER AN EXTENDED PERIOD OF TIME, ABRASION PARTICLES COULD DEPOSIT ON THE ELECTRICAL CONTACTS WITHIN THE SWITCH, CAUSING A DISRUPTION OF THE ELECTRIC CURRENT THROUGH THE CONTACTS. IF THE DISRUPTION OCCURS WHEN THE VEHICLE IS STATIONARY WITH THE TRANSMISSION IN THE NEUTRAL OR PARK POSITIONS, THE TRANSMISSION WILL SWITCH AUTOMATICALLY INTO THE EMERGENCY PROGRAM, WHICH IS DISPLAYED IN THE INSTRUMENT CLUSTER VIA A WARNING LAMP AND A MESSAGE, "TRANS. FAIL-SAFE PROG." IN THIS CASE, THE VEHICLE CAN BE DRIVEN IN LOWER GEARS ONLY WITH LIMITED ENGINE OUTPUT. Recall Details
Problem: VEHICLE DESCRIPTION: 4.4I SPORT UTILITY VEHICLES. OVER AN EXTENDED PERIOD OF TIME, ABRASION PARTICLES COULD DEPOSIT ON THE ELECTRICAL CONTACTS WITHIN THE SWITCH, CAUSING A DISRUPTION OF THE ELECTRIC CURRENT THROUGH THE CONTACTS. IF THE DISRUPTION OCCURS WHEN THE VEHICLE IS STATIONARY WITH THE TRANSMISSION IN THE NEUTRAL OR PARK POSITIONS, THE TRANSMISSION WILL SWITCH AUTOMATICALLY INTO THE EMERGENCY PROGRAM, WHICH IS DISPLAYED IN THE INSTRUMENT CLUSTER VIA A WARNING LAMP AND A MESSAGE, "TRANS. FAIL-SAFE PROG." IN THIS CASE, THE VEHICLE CAN BE DRIVEN IN LOWER GEARS ONLY WITH LIMITED ENGINE OUTPUT. Recall Details
|