FORD B SERIES RECALLS - (17 Recalls Found)
Since 1972, FORD has issued a total of 7882 car recalls worldwide. Of those recalls, 17 have been for the FORD B SERIES starting in 1978. This accounts for approximately 13.6% of the 58048 car recalls issued by the NHTSA since 1966. The B SERIES accounts for less than 1.0% of all the FORD recalls issued since 1972. Compared to other car manufacturers, FORD ranks #1 in overall number of recalls issued by a car maker.
Please keep in mind these numbers are for statistical purposes only & do not necessarily reflect the quality of the FORD B SERIES or FORD itself. These figures are based only on the number of recalls issued and NOT the total number of vehicles affected by a particular recall.
Find your FORD B SERIES listed below. Results are sorted year from newest to oldest. Select the desired FORD B SERIES to view the complete recall details.
Information provided by the National Highway Traffic Safety Administration.
| View FORD B SERIES Recalls Below ↓ |
|
1990 Recalls ↓
Problem: INCORRECT SIZE MASTER CYLINDER INSTALLED WILL PROVIDE LESS LINE PRESSURE TO WHEEL CYLINDERS FOR A GIVEN PEDAL PRESSURE. Recall Details - 5/24/1990
1987 Recalls ↓
Problem: DIESEL ENGINE GOVEERNOR LEVER ASSEMBLIES MAY HAVE BEEN IMPROPERLY ASSEMBLED SO THAT ONE OR MORE OF THREE RETAINING PRONGS MAY NOT BE ENGAGED IN THE GOVERNOR LEVER PIVOT SHAFTS. Recall Details - 4/27/1987
1985 Recalls ↓
Problem: THE HYDRAULIC PARKING BRAKE CONTROL VALVE MAY INADVERTENTLY ACTIVATE DUE TO MOMENTARY PRESSURE DISRUPTIONS WITHIN THE SYSTEM AND CAUSE THE PARKING BRAKE TO BE APPLIED, STOPPING OR SLOWING THE TRUCK UNEXPECTEDLY. CONSEQUENCE OF DEFECT: THIS UNEXPECTED STOPPING OR SLOWING OF THE TRUCK MAY INCREASE THE RISK OF A REAR END COLLISION SINCE THE BRAKE (STOP) LIGHTS ARE NOT ACTIVATED. ALSO, ON CERTAIN ROAD CONDITIONS THIS OCCURRENCE MAY RESULT IN LOSS OF VEHICLE CONTROL WHICH WOULD LEAD TO AN ACCIDENT. Recall Details - 12/20/1985
1984 Recalls ↓
Problem: THE HYDRAULIC PARKING BRAKE CONTROL VALVE MAY INADVERTENTLY ACTIVATE DUE TO MOMENTARY PRESSURE DISRUPTIONS WITHIN THE SYSTEM AND CAUSE THE PARKING BRAKE TO BE APPLIED, STOPPING OR SLOWING THE TRUCK UNEXPECTEDLY. CONSEQUENCE OF DEFECT: THIS UNEXPECTED STOPPING OR SLOWING OF THE TRUCK MAY INCREASE THE RISK OF A REAR END COLLISION SINCE THE BRAKE (STOP) LIGHTS ARE NOT ACTIVATED. ALSO, ON CERTAIN ROAD CONDITIONS THIS OCCURRENCE MAY RESULT IN LOSS OF VEHICLE CONTROL WHICH WOULD LEAD TO AN ACCIDENT. Recall Details - 12/20/1985
1982 Recalls ↓
Problem: SOME OF THE INVOLVED VEHICLES MAY HAVE BEEN BUILT WITH LEFT REAR BRAKE ASSEMBLIES THAT WERE INCORRECTLY PRODUCED AND MAY HAVE ONE OR TWO AUTOMATIC BRAKE ADJUSTERS THAT WERE INTENDED FOR RIGHT REAR BRAKE ASSEMBLIES. THE ADJUSTER WORKS BACKWARDS AND INCREASES THE CLEARANCE BETWEEN THE BRAKE LINING AND DRUM, INSTEAD OF MAINTAINING IT. Recall Details - 3/22/1983
1979 Recalls ↓
Problem: CERTAIN AIR BRAKE ANTI-LOCK MODULATORS COULD MALFUNCTION DURING OPERATION OF THE ANTI-LOCK SYSTEM. A NYLON PISTON WITHIN THE MODULATOR AIR VALVE SYSTEM CAN SWELL FROM EXPOSURE TO SYSTEM CONTAMINANTS. CONTINUED EXPOSURE MAY CAUSE THE PISTON TO SWELL TO THE EXTENT THAT INTERFERENCE WITH THE CYLINDER WALL WILL RESULT, CAUSING MOMENTARY STICKING OR A PERMANENT JAM. THIS CAN RESULT IN TEMPORARY OR PERMANENT LOSS OF BRAKING FOR THE AFFECTED AXLE. Recall Details - 3/29/1979
1978 Recalls ↓
Problem: CERTAIN AIR BRAKE ANTI-LOCK MODULATORS COULD MALFUNCTION DURING OPERATION OF THE ANTI-LOCK SYSTEM. A NYLON PISTON WITHIN THE MODULATOR AIR VALVE SYSTEM CAN SWELL FROM EXPOSURE TO SYSTEM CONTAMINANTS. CONTINUED EXPOSURE MAY CAUSE THE PISTON TO SWELL TO THE EXTENT THAT INTERFERENCE WITH THE CYLINDER WALL WILL RESULT, CAUSING MOMENTARY STICKING OR A PERMANENT JAM. THIS CAN RESULT IN TEMPORARY OR PERMANENT LOSS OF BRAKING FOR THE AFFECTED AXLE. Recall Details - 3/29/1979
1977 Recalls ↓
Problem: CERTAIN AIR BRAKE ANTI-LOCK MODULATORS COULD MALFUNCTION DURING OPERATION OF THE ANTI-LOCK SYSTEM. A NYLON PISTON WITHIN THE MODULATOR AIR VALVE SYSTEM CAN SWELL FROM EXPOSURE TO SYSTEM CONTAMINANTS. CONTINUED EXPOSURE MAY CAUSE THE PISTON TO SWELL TO THE EXTENT THAT INTERFERENCE WITH THE CYLINDER WALL WILL RESULT, CAUSING MOMENTARY STICKING OR A PERMANENT JAM. THIS CAN RESULT IN TEMPORARY OR PERMANENT LOSS OF BRAKING FOR THE AFFECTED AXLE. Recall Details - 3/29/1979
Problem: THE ENGINE COOLING FAN BLADES MAY CRACK AND CHIP DUE TO HIGH STRESSES CAUSED BY VIBRATIONS. THE CHIPPED PIECES OF THE BLADE COULD FLY INTO THE UNDERHOOD COMPONENTS. ALSO, THESE PIECES COULD FLY OUT FROM THE VEHICLE IF THE HOOD IS OPEN AND THE ENGINE IS RUNNING. Recall Details - 7/3/1978
1976 Recalls ↓
Problem: THE ENGINE COOLING FAN BLADES MAY CRACK AND CHIP DUE TO HIGH STRESSES CAUSED BY VIBRATIONS. THE CHIPPED PIECES OF THE BLADE COULD FLY INTO THE UNDERHOOD COMPONENTS. ALSO, THESE PIECES COULD FLY OUT FROM THE VEHICLE IF THE HOOD IS OPEN AND THE ENGINE IS RUNNING. Recall Details - 7/3/1978
Problem: CERTAIN AIR BRAKE ANTI-LOCK MODULATORS COULD MALFUNCTION DURING OPERATION OF THE ANTI-LOCK SYSTEM. A NYLON PISTON WITHIN THE MODULATOR AIR VALVE SYSTEM CAN SWELL FROM EXPOSURE TO SYSTEM CONTAMINANTS. CONTINUED EXPOSURE MAY CAUSE THE PISTON TO SWELL TO THE EXTENT THAT INTERFERENCE WITH THE CYLINDER WALL WILL RESULT, CAUSING MOMENTARY STICKING OR A PERMANENT JAM. THIS CAN RESULT IN TEMPORARY OR PERMANENT LOSS OF BRAKING FOR THE AFFECTED AXLE. Recall Details - 3/29/1979
1975 Recalls ↓
Problem: CERTAIN AIR BRAKE ANTI-LOCK MODULATORS COULD MALFUNCTION DURING OPERATION OF THE ANTI-LOCK SYSTEM. A NYLON PISTON WITHIN THE MODULATOR AIR VALVE SYSTEM CAN SWELL FROM EXPOSURE TO SYSTEM CONTAMINANTS. CONTINUED EXPOSURE MAY CAUSE THE PISTON TO SWELL TO THE EXTENT THAT INTERFERENCE WITH THE CYLINDER WALL WILL RESULT, CAUSING MOMENTARY STICKING OR A PERMANENT JAM. THIS CAN RESULT IN TEMPORARY OR PERMANENT LOSS OF BRAKING FOR THE AFFECTED AXLE. Recall Details - 3/29/1979
Problem: THE ENGINE COOLING FAN BLADES MAY CRACK AND CHIP DUE TO HIGH STRESSES CAUSED BY VIBRATIONS. THE CHIPPED PIECES OF THE BLADE COULD FLY INTO THE UNDERHOOD COMPONENTS. ALSO, THESE PIECES COULD FLY OUT FROM THE VEHICLE IF THE HOOD IS OPEN AND THE ENGINE IS RUNNING. Recall Details - 7/3/1978
1974 Recalls ↓
Problem: THE ENGINE COOLING FAN BLADES MAY CRACK AND CHIP DUE TO HIGH STRESSES CAUSED BY VIBRATIONS. THE CHIPPED PIECES OF THE BLADE COULD FLY INTO THE UNDERHOOD COMPONENTS. ALSO, THESE PIECES COULD FLY OUT FROM THE VEHICLE IF THE HOOD IS OPEN AND THE ENGINE IS RUNNING. Recall Details - 7/3/1978
1973 Recalls ↓
Problem: THE ENGINE COOLING FAN BLADES MAY CRACK AND CHIP DUE TO HIGH STRESSES CAUSED BY VIBRATIONS. THE CHIPPED PIECES OF THE BLADE COULD FLY INTO THE UNDERHOOD COMPONENTS. ALSO, THESE PIECES COULD FLY OUT FROM THE VEHICLE IF THE HOOD IS OPEN AND THE ENGINE IS RUNNING. Recall Details - 7/3/1978
1972 Recalls ↓
Problem: THE ENGINE COOLING FAN BLADES MAY CRACK AND CHIP DUE TO HIGH STRESSES CAUSED BY VIBRATIONS. THE CHIPPED PIECES OF THE BLADE COULD FLY INTO THE UNDERHOOD COMPONENTS. ALSO, THESE PIECES COULD FLY OUT FROM THE VEHICLE IF THE HOOD IS OPEN AND THE ENGINE IS RUNNING. Recall Details - 7/3/1978
1971 Recalls ↓
Problem: THE ENGINE COOLING FAN BLADES MAY CRACK AND CHIP DUE TO HIGH STRESSES CAUSED BY VIBRATIONS. THE CHIPPED PIECES OF THE BLADE COULD FLY INTO THE UNDERHOOD COMPONENTS. ALSO, THESE PIECES COULD FLY OUT FROM THE VEHICLE IF THE HOOD IS OPEN AND THE ENGINE IS RUNNING. Recall Details - 7/3/1978
|