by Jaguar Cars, Ltd.
JAGUAR VANDEN PLAS RECALLS - (11 Recalls Found)
Since 1977, JAGUAR has issued a total of 942 car recalls worldwide. Of those recalls, 11 have been for the JAGUAR VANDEN PLAS starting in 1987. This accounts for approximately 1.6% of the 58048 car recalls issued by the NHTSA since 1966. The VANDEN PLAS accounts for about 1.2% of all the JAGUAR recalls issued since 1977. Compared to other car manufacturers, JAGUAR ranks #16 in overall number of recalls issued by a car maker.
Please keep in mind these numbers are for statistical purposes only & do not necessarily reflect the quality of the JAGUAR VANDEN PLAS or JAGUAR itself. These figures are based only on the number of recalls issued and NOT the total number of vehicles affected by a particular recall.
Find your JAGUAR VANDEN PLAS listed below. Results are sorted year from newest to oldest. Select the desired JAGUAR VANDEN PLAS to view the complete recall details.
Information provided by the National Highway Traffic Safety Administration.
| View JAGUAR VANDEN PLAS Recalls Below ↓ |
|
1992 Recalls ↓
Problem: THE NORMAL LOCKUP FUNCTION OF THE AUTOMATIC (PASSIVE) BELT REEL CAN CAUSE THE BELT MOTOR WINCH ASSEMBLY TO LOCKUP SUCH THAT THE PASSIVE BELT SYSTEM WILL NOT DEPLOY/FUNCTION OR GETS STUCK AT VARIOUS POINTS ALONG THE TRACK CAUSING THE KINKING OR BREAKING OF ITS CABLE OR DETACHMENT OF THE TONGUE. Recall Details - 11/1/1993
1991 Recalls ↓
Problem: THE NORMAL LOCKUP FUNCTION OF THE AUTOMATIC (PASSIVE) BELT REEL CAN CAUSE THE BELT MOTOR WINCH ASSEMBLY TO LOCKUP SUCH THAT THE PASSIVE BELT SYSTEM WILL NOT DEPLOY/FUNCTION OR GETS STUCK AT VARIOUS POINTS ALONG THE TRACK CAUSING THE KINKING OR BREAKING OF ITS CABLE OR DETACHMENT OF THE TONGUE. Recall Details - 11/1/1993
1990 Recalls ↓
Problem: THE NORMAL LOCKUP FUNCTION OF THE AUTOMATIC (PASSIVE) BELT REEL CAN CAUSE THE BELT MOTOR WINCH ASSEMBLY TO LOCKUP SUCH THAT THE PASSIVE BELT SYSTEM WILL NOT DEPLOY/FUNCTION OR GETS STUCK AT VARIOUS POINTS ALONG THE TRACK CAUSING THE KINKING OR BREAKING OF ITS CABLE OR DETACHMENT OF THE TONGUE. Recall Details - 11/1/1993
Problem: HEAD OF REAR CALIPER FIXING BOLT COULD BREAK OFF, LEAVING ONLY BOLT SHANK IN PLACE. Recall Details - 12/26/1989
1989 Recalls ↓
Problem: HIGH PRESSURE FLUID SUPPLY HOSE COULD RUPTURE CAUSING LOSS OF FLUID OF THE BRAKE POWER ASSIST SYSTEM. Recall Details - 2/8/1990
Problem: BRAKE ACCUMULATOR SWITCH WHICH CONTROLS HYDRAULIC FLUID FLOW TO AND FROM THE ENGINE DRIVEN PUMP, COULD LEAK, CAUSING LOSS OF FLUID IN THE POWER BRAKE ASSIST SYSTEM. THIS LEAK IS ALSO IN THE VICINITY OF ELECTRICAL WIRING. Recall Details - 2/8/1990
Problem: THE NORMAL LOCKUP FUNCTION OF THE AUTOMATIC (PASSIVE) BELT REEL CAN CAUSE THE BELT MOTOR WINCH ASSEMBLY TO LOCKUP SUCH THAT THE PASSIVE BELT SYSTEM WILL NOT DEPLOY/FUNCTION OR GETS STUCK AT VARIOUS POINTS ALONG THE TRACK CAUSING THE KINKING OR BREAKING OF ITS CABLE OR DETACHMENT OF THE TONGUE. Recall Details - 11/1/1993
1988 Recalls ↓
Problem: BRAKE ACCUMULATOR SWITCH WHICH CONTROLS HYDRAULIC FLUID FLOW TO AND FROM THE ENGINE DRIVEN PUMP, COULD LEAK, CAUSING LOSS OF FLUID IN THE POWER BRAKE ASSIST SYSTEM. THIS LEAK IS ALSO IN THE VICINITY OF ELECTRICAL WIRING. Recall Details - 2/8/1990
Problem: HIGH PRESSURE FLUID SUPPLY HOSE COULD RUPTURE CAUSING LOSS OF FLUID OF THE BRAKE POWER ASSIST SYSTEM. Recall Details - 2/8/1990
Problem: CRUISE CONTROL MAY FAIL TO DISENGAGE IN A NORMAL MANNER UPON APPLICATION OF THE BRAKES, AND THE REAR BRAKE LAMPS MAY FAIL DUE TO MALFUNCTION OF BRAKE LAMP MICROSWITCH ASSEMBLY. Recall Details - 7/15/1987
Problem: CERTAIN FRONT SUSPENSION LOWER SPRING PAN FIXINGS MAY FAIL DUE TO STRESS CORROSION. Recall Details - 2/12/1988
|