MACK Recalls

Apr 01, 2011 – MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2008-2012 MRU AND LEU HEAVY TRUCKS MANUFACTURED FROM JANUARY 3, 2007, THROUGH FEBRUARY 3, 2011. THE ELECTRICAL CIRCUITRY IN THESE VEHICLES MAY NOT PROVIDE ADEQUATE OVERCURRENT PROTECTION.

Mar 31, 2011 – MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2008-2011 CHU AND CXU HEAVY TRUCKS MANUFACTURED FROM JANUARY 2008 THROUGH JULY 2010. THERE MAY BE AN INTERFERENCE WITH THE BOLTS USED TO SECURE THE FIFTH WHEEL TO THE FRAME THAT CAN PREVENT THE BOLTS FROM BEING TORQUED TO SPECIFICATION.

Oct 27, 2010 – MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2010 THROUGH 2011 CXU, HEAVY TRUCKS MANUFACTURED FROM AUGUST 12, 2009, THROUGH AUGUST 31, 2010. THE REAR HOLD-DOWN BRACKETS THAT SECURE THE BATTERY BOX LID MAY BE ROTATED TOO FAR FORWARD, WHICH MAY RESTRICT THE BATTERY BOX LID FROM PROPERLY SEATING.

Oct 27, 2010 – MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2011 CHU AND CXU, HEAVY TRUCKS MANUFACTURED FROM JULY 13, 2010, THROUGH AUGUST 13, 2010, WITHOUT REAR MUD FLAP HANGER BRACKETS. THESE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THE REAR CONSPICUITY TREATMENT TYPICALLY FOUND ON THE MUD FLAP HANGER BRACKETS MAY NOT HAVE BEEN INSTALLED IN THE ALTERNATE POSITIONS AS ALLOWED IN THE REGULATION ON VEHICLES MANUFACTURED WITHOUT REAR MUD FLAP HANGER BRACKETS.

Sep 07, 2010 – MACK IS RECALLING CERTAIN MODEL YEAR 2008 THROUGH 2011 GU AND MRU MODEL VEHICLES MANUFACTURED WITH A FRONT TOW GLAD HAND OPTION. THE ACTUATION AND RELEASE TIMING OF THE VEHICLES EXCEEDS THE LIMIT WHICH FAILS TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, "AIR BRAKE SYSTEMS."

Mar 03, 2010 – MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2002 THROUGH 2004 CL, CV, LE, MR, RB, RD, AND MODEL YEAR 2003 THROUGH 2004 DM HEAVY TRUCKS MANUFACTURED FROM FEBRUARY 1, 2002 THROUGH SEPTEMBER 30, 2003, EQUIPPED WITH AXLE BEAMS MANUFACTURED BY BHARAT FORGE. THE AXLE BEAM MAY HAVE TRANSVERSE SHEAR LINES ON THE BOTTOM OF THE AXLE FROM THE TRIMMING PROCESS.

Oct 06, 2009 – MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2008-2010 TRUCKS WHICH FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, "AIR BRAKE SYSTEMS."

Jun 30, 2009 – MACK IS RECALLING 10,300 MODEL YEAR 2004 AND 2005 CL, CV, DM, LE, AND RB AND MODEL YEAR 2004 RD HEAVY TRUCKS MANUFACTURED FROM OCTOBER 1, 2003 THROUGH SEPTEMBER 30, 2004, EQUIPPED WITH AXLE BEAMS MANUFACTURED BY BHARAT FORGE. THE AXLE BEAM MAY HAVE TRANSVERSE SHEAR LINES ON THE BOTTOM OF THE AXLE FROM THE TRIMMING PROCESS.

Jun 01, 2009 – MACK IS RECALLING 338 MODEL YEAR 2009 MRU AND LEU HEAVY DUTY TRUCKS MANUFACTURED FROM AUGUST 20 THROUGH NOVEMBER 26, 2008 EQUIPPED WITH CERTAIN HALDEX QUICK RELEASE VALVES (QRV). THE RUBBER DIAPHRAGM INSIDE THE QRV MAY EXPERIENCE DELAMINATION RESULTING IN SIGNIFICANT LEVELS OF AIR PRESSURE LEAKAGE PAST AND/OR THROUGH THE DIAPHRAGM, OR THE DEVELOPMENT OF A BUBBLE IN THE DIAPHRAGM WHICH MAY TRAP AIR PRESSURE IN THE VALVE AND NOT ALLOW THE SERVICE BRAKES TO RELEASE.

Dec 23, 2008 – MACK IS RECALLING 34,269 MY 1999-2005 CX AND MY 2004-2008 CXN TRUCKS. THE HEADLIGHT SWITCH MAY PREMATURELY FAIL RESULTING IN INOPERATIVE OR INTERMITTENT HEADLIGHTS.