MAZDA MIATA Recalls

Mar 23, 2006 – CERTAIN PRO-A MOTORS CORNER LAMPS, TURN SIGNALS, AND HEADLIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.

Jun 05, 2003 – ON CERTAIN MINI VANS AND PASSENGER VEHICLES, THE SOCKET HOLDER IN THE FOG LIGHTS IS INSTALLED IN THE LAMP CASING USING PRESSURE. DURING OPERATION OF THE FOG LIGHT, THE HEAT FROM THE BULB CAN EXPAND THE SOCKET HOLDER. THE EXPANSION CAN FORCE THE SOCKET HOLDER REARWARD. AFTER REPEATEDLY BEING SUBJECT TO THIS EXPANSION, IF THE FOG LIGHT IS ALSO SUBJECTED TO VIBRATION DURING VEHICLE OPERATION, THE SOCKET HOLDER WITH THE BULB HOLDER AND THE WIRING HARNESS MAY SEPARATE FROM THE FOG LIGHT CASING.

Feb 07, 2000 – VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE NON-RETURN VALVE INSTALLED AT THE LOWER END OF THE FUEL FILLER PIPE CAN STICK DUE TO INSUFFICIENT CLEARANCE BETWEEN THE VALVE CASE AND THE VALVE SHUTTER COMBINED WITH THE MATERIAL PROPERTIES OF THE FUEL HOSE BETWEEN THE FILLER PIPE AND THE FUEL TANK.

Jan 06, 2000 – VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH THE SAS SENSOR UNIT. THESE VEHICLES CAN EXPERIENCE AIR BAG DEPLOYMENTS IN MINOR UNDERCARRIAGE IMPACTS.

Mar 25, 1998 – VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH 1.8 LITER ENGINES. AS A RESULT OF THE LENGTH AND ROUTING OF THE INJECTOR HARNESS, IT CAN CONTACT THE MANIFOLD AT THE EGR PIPE. IF THE HARNESS IS DAMAGED, A SHORT CIRCUIT CAN OCCUR, BLOWING THE FUSE FOR THE FUEL INJECTOR.

Nov 03, 1992 – A HARDTOP HOIST ACCESSORY KIT WAS SOLD TO CUSTOMERS WHO HAVE THE MIATA WITH A HARDTOP. THE PLASTIC BUCKLES USED TO ADJUST STRAP TENSION CAN BREAK AFTER THE HARDTOP HAS BEEN SUSPENDED BY THE HOIST.

May 13, 1991 – A RETURN FLUID LINE OF THE FRONT BRAKE SYSTEM IS MISCONNECTED TO A REAR BRAKE FLUID RETURN. WHEN THE ABS SYSTEM COMES INTO USE, ALL THE FLUID FROM THE FRONT BRAKES GOES TO THE REAR BRAKE SYSTEM. THE FLUID RETURNS TO THE FRONT SYSTEM WHEN THE BRAKE PEDAL IS RELEASED.