TOYOTA CAMRY Recalls

Feb 09, 2010 – TOYOTA IS RECALLING CERTAIN MODEL YEAR 2010 CAMRYS. THE LENGTH OF THE POWER STEERING PRESSURE HOSE ON VEHICLES EQUIPPED WITH THE 4-CYLINDER (2AR-FE) ENGINE MAY BE INSUFFICIENT, SUCH THAT THE GAP BETWEEN THE CRIMP ON THE PRESSURE HOSE AND THE BRAKE TUBE FOR THE LEFT REAR BRAKE MAY BE INSUFFICIENT. UNDER THESE CIRCUMSTANCES THE BRAKE TUBE MAY INTERFERE WITH THE CRIMP AND MAY WEAR AND THEN PERFORATE.

Feb 03, 2010 – GULF STATES TOYOTA IS RECALLING CERTAIN MODEL YEAR 2005-2010 VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS." THESE VEHICLES WERE SOLD BETWEEN SEPTEMBER 1, 2005 AND JUNE 2, 2008 WITHOUT THE REQUISITE LOAD CARRYING CAPACITY MODIFICATION LABELS.

Feb 03, 2010 – SOUTHEAST TOYOTA IS RECALLING CERTAIN MODEL YEAR 2005-2011 PASSENGER VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS." THESE VEHICLES WERE SOLD WITHOUT THE REQUISITE LOAD CARRYING CAPACITY MODIFICATION LABELS.

Jan 21, 2010 – TOYOTA IS RECALLING CERTAIN MODEL YEAR 2005-2010 AVALON, MODEL YEAR 2007-2010 CAMRY, MODEL YEAR 2009-2010 COROLLA, COROLLA MATRIX, RAV4, MODEL YEAR 2010 HIGHLANDER, MODEL YEAR 2008-2010 SEQUOIA, AND MODEL YEAR 2007-2010 TUNDRA VEHICLES. DUE TO THE MANNER IN WHICH THE FRICTION LEVER INTERACTS WITH THE SLIDING SURFACE OF THE ACCELERATOR PEDAL INSIDE THE PEDAL SENSOR ASSEMBLY, THE SLIDING SURFACE OF THE LEVER MAY BECOME SMOOTH DURING VEHICLE OPERATION. IN THIS CONDITION, IF CONDENSATION OCCURS ON THE SURFACE, AS MAY OCCUR FROM HEATER OPERATION (WITHOUT A/C) WHEN THE PEDAL ASSEMBLY IS COLD, THE FRICTION WHEN THE ACCELERATOR PEDAL IS OPERATED MAY INCREASE, WHICH MAY RESULT IN THE ACCELERATOR PEDAL BECOMING HARDER TO DEPRESS, SLOWER TO RETURN, OR, IN THE WORST CASE, MECHANICALLY STUCK IN A PARTIALLY DEPRESSED POSITION.

Oct 05, 2009 – TOYOTA IS RECALLING CERTAIN MODEL YEAR 2004-2010 PASSENGER VEHICLES. THE ACCELERATOR PEDAL CAN GET STUCK IN THE WIDE OPEN POSITION DUE TO ITS BEING TRAPPED BY AN UNSECURED OR INCOMPATIBLE DRIVER'S FLOOR MAT.

May 11, 2009 – DOPE, INC. IS RECALLING 42,540 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.

Aug 11, 2008 – K2 MOTOR IS RECALLING 1,921 AFTERMARKET HEADLAMPS OF VARIOUS MODELS SOLD FOR USE ON THE ABOVE LISTED VEHICLES. THESE HEADLAMPS ARE MISSING THE AMBER SIDE REFLEX REFLECTOR WHICH FAILS TO CONFORM WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT."

Sep 26, 2007 – CERTAIN ALL WEATHER FLOOR MATS (AWFM) SPECIFICALLY SOLD AS AN OPTIONAL ACCESSORY FOR USE ON THE 2007 AND 2008 MODEL YEAR LEXUS ES350 AND TOYOTA CAMRY VEHICLES. THE AWFM INCLUDES TWO GROMMET HOLES AND RETAINING HOOKS (CLIPS) TO SECURE THE MAT TO THE VEHICLE'S CARPET. IF THE AWFM IS NOT SECURED BY ITSELF OR IF IT IS PLACED ON TOP OF AN EXISTING CARPETING FLOOR MAT, THE MAT COULD MOVE FORWARD DURING THE VEHICLE USAGE AND IT MAY INTERFERE WITH THE ACCELERATOR PEDAL.

Dec 21, 2006 – ON CERTAIN VEHICLES EQUIPPED WITH CURTAIN SIDE AIR BAGS (CSA), THE CSA TETHER STRAP LOCATED IN THE FRONT PILLARS MAY HAVE BEEN INCORRECTLY ROUTED DURING THE ASSEMBLY PROCESS.

Jun 29, 2006 – CERTAIN AAI MOTORSPORTS COMBINATION LAMPS SOLD AS REPLACEMENT LAMPS FOR USE ON THE ABOVE LIST PASSENGER VEHICLES. COMBINATION LAMPS NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT."