TOYOTA TUNDRA Recalls

Feb 03, 2010 – GULF STATES TOYOTA IS RECALLING CERTAIN MODEL YEAR 2005-2010 VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS." THESE VEHICLES WERE SOLD BETWEEN SEPTEMBER 1, 2005 AND JUNE 2, 2008 WITHOUT THE REQUISITE LOAD CARRYING CAPACITY MODIFICATION LABELS.

Feb 03, 2010 – SOUTHEAST TOYOTA IS RECALLING CERTAIN MODEL YEAR 2005-2011 PASSENGER VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS." THESE VEHICLES WERE SOLD WITHOUT THE REQUISITE LOAD CARRYING CAPACITY MODIFICATION LABELS.

Jan 21, 2010 – TOYOTA IS RECALLING CERTAIN MODEL YEAR 2005-2010 AVALON, MODEL YEAR 2007-2010 CAMRY, MODEL YEAR 2009-2010 COROLLA, COROLLA MATRIX, RAV4, MODEL YEAR 2010 HIGHLANDER, MODEL YEAR 2008-2010 SEQUOIA, AND MODEL YEAR 2007-2010 TUNDRA VEHICLES. DUE TO THE MANNER IN WHICH THE FRICTION LEVER INTERACTS WITH THE SLIDING SURFACE OF THE ACCELERATOR PEDAL INSIDE THE PEDAL SENSOR ASSEMBLY, THE SLIDING SURFACE OF THE LEVER MAY BECOME SMOOTH DURING VEHICLE OPERATION. IN THIS CONDITION, IF CONDENSATION OCCURS ON THE SURFACE, AS MAY OCCUR FROM HEATER OPERATION (WITHOUT A/C) WHEN THE PEDAL ASSEMBLY IS COLD, THE FRICTION WHEN THE ACCELERATOR PEDAL IS OPERATED MAY INCREASE, WHICH MAY RESULT IN THE ACCELERATOR PEDAL BECOMING HARDER TO DEPRESS, SLOWER TO RETURN, OR, IN THE WORST CASE, MECHANICALLY STUCK IN A PARTIALLY DEPRESSED POSITION.

Nov 18, 2009 – TOYOTA IS RECALLING MODEL YEAR 2000-2003 TUNDRA VEHICLES ORIGINALLY SOLD IN OR CURRENTLY REGISTERED IN THE FOLLOWING STATES: CONNECTICUT, DELAWARE, ILLINOIS, INDIANA, KENTUCKY, MAINE, MARYLAND, MASSACHUSETTS, MICHIGAN, MINNESOTA, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, VIRGINIA, WEST VIRGINIA, WISCONSIN AND THE DISTRICT OF COLUMBIA. EXCESSIVE CORROSION OF THE REAR CROSS MEMBER MAY CAUSE THE SEPARATION OF THE SPARE TIRE STOWED UNDER THE TRUCK BED WHICH WOULD PRESENT A ROAD HAZARD THAT COULD CAUSE A CRASH. ALSO, CORROSION OF THE REAR CROSS MEMBER COULD AFFECT THE REAR BRAKE LINES AND THE PROPORTIONING VALVE RESULTING IN DIMINISHED BRAKING CAPABILITY.

Oct 05, 2009 – TOYOTA IS RECALLING CERTAIN MODEL YEAR 2004-2010 PASSENGER VEHICLES. THE ACCELERATOR PEDAL CAN GET STUCK IN THE WIDE OPEN POSITION DUE TO ITS BEING TRAPPED BY AN UNSECURED OR INCOMPATIBLE DRIVER'S FLOOR MAT.

Jun 15, 2009 – TOYOTA IS RECALLING 27,080 MODEL YEAR 2005 THROUGH 2010 PASSENGER CARS BUILT FROM SEPTEMBER 1, 2005 TO MAY 4, 2009. THESE VEHICLES WERE NOT EQUIPPED WITH LOAD CARRYING CAPACITY MODIFICATION LABELS WHICH FAILS TO CONFORM WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS."

May 11, 2009 – DOPE, INC. IS RECALLING 42,540 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.

Mar 31, 2008 – SOUTHEAST TOYOTA IS RECALLING ALLOY WHEEL LUG NUTS USED FOR THE 18" DIAMOND FINISH 5-SPOKE ALLOY WHEELS AND 20" PAINTED ALLOY WHEELS WITH 6-DUAL SPOKES SOLD AS AN UPGRADE PACKAGE FOR 2007 TOYOTA TUNDRA MODEL VEHICLES. THE WHEEL NUTS CAN CRACK AND BREAK IF THE WHEELS ARE NOT INSTALLED CAREFULLY OR NOT CAREFULLY TIGHTENED. THIS WHEEL NUT CONDITION COULD OCCUR AT THE TIME OF WHEEL INSTALLATION, TIRE ROTATION, OR SERVICE.

Feb 25, 2008 – SOUTHEAST TOYOTA IS RECALLING 1,555 MY 2007 TUNDRA VEHICLES DUE TO A WHEEL NUT ISSUE. THE RECALLED VEHICLES ARE MY 2007 TUNDRAS EQUIPPED WITH 18" INSTALLED DIAMOND FINISH 5-SPOKE ALLOY WHEELS (OPTION CODE WN1 OR WN4) OR 20" INSTALLED PAINTED ALLOY WHEELS WITH 6 DUAL SPOKES (OPTION CODE WV1 OR WV4). AFFECTED VEHICLES WERE ORIGINALLY SOLD IN FLORIDA, GEORGIA, ALABAMA, NORTH CAROLINA OR SOUTH CAROLINA. WHEN THE VEHICLE WAS PROCESSED AT THE PORT, THE UPGRADED ALLOY WHEELS WERE FASTENED WITH NEW WHEEL NUTS. THE WHEEL NUTS CAN CRACK AND BREAK IF THEY ARE NOT INSTALLED CAREFULLY OR NOT CAREFULLY TIGHTENED. THIS WHEEL NUT CONDITION COULD OCCUR AT THE TIME OF WHEEL INSTALLATION, TIRE ROTATION, OR SERVICE.

Dec 18, 2007 – ON CERTAIN 4-WHEEL DRIVE PICKUP TRUCKS, DUE TO THE IMPROPER HEAT TREATMENT OF THE SLIP YOKES THAT HAD BEEN REWORKED DURING THE MANUFACTURING PROCESS, THE HARDNESS OF THE SLIP YOKE MAY BE INSUFFICIENT.