VEHICLE DESCRIPTION: DURING THE TIRE MOUNTING PROCESS ON CERTAIN PASSENGER VEHICLES BUILT WITH STANDARD

Nov 26, 2001 — Recall Campaign #01V352000

VEHICLE DESCRIPTION: DURING THE TIRE MOUNTING PROCESS ON CERTAIN PASSENGER VEHICLES BUILT WITH STANDARD (NON-SPORT) SUSPENSION AND EQUIPPED WITH CONTINENTAL CONTITOURINGCONTACT CH95 ECOPLUS TIRES, SIZE 225/65R16 95H, HAVING DOT CODES 4001, 4101, OR 4201, THE OUTER SIDEWALL SURFACE OF THE TIRES MAY HAVE BEEN CUT BY A SHARP EDGE. OPERATION OF THE VEHICLE OVER A LONG PERIOD OF TIME COULD LEAD TO A REDUCTION OF INFLATION PRESSURE.

The recall was influenced by the manufacturer with about 1,318 units affected.

See recall notice

NHTSA Safety Recall Notice

01V352000

Manufacturer:	BMW of North America, LLC
Recall date:	November 26, 2001
NHTSA Campaign #:	01V352000
Units affected:	1,318

Description:: VEHICLE DESCRIPTION: DURING THE TIRE MOUNTING PROCESS ON CERTAIN PASSENGER VEHICLES BUILT WITH STANDARD (NON-SPORT) SUSPENSION AND EQUIPPED WITH CONTINENTAL CONTITOURINGCONTACT CH95 ECOPLUS TIRES, SIZE 225/65R16 95H, HAVING DOT CODES 4001, 4101, OR 4201, THE OUTER SIDEWALL SURFACE OF THE TIRES MAY HAVE BEEN CUT BY A SHARP EDGE. OPERATION OF THE VEHICLE OVER A LONG PERIOD OF TIME COULD LEAD TO A REDUCTION OF INFLATION PRESSURE.
Consequeces:: CONTINUED DRIVING WITH LOW INFLATION PRESSURE IN THE TIRE COULD ULTIMATELY RESULT IN DAMAGE TO THE TIRE, AFFECT VEHICLE HANDLING AND CONTROL, AND COULD IN SOME CASES RESULT IN A VEHICLE CRASH.
Corrective action:: DEALERS WILL INSPECT ALL FIVE TIRES FOR A POSSIBLE CUT IN THE SIDEWALL, AND IF A CUT IS FOUND, THE TIRE WILL BE REPLACED. OWNER NOTIFICATION BEGAN DECEMBER 10, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BMW AT 1-800-831-1117.
Notes:: ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).

Affects the following:

2002 BMW 525I Complaints
The contact owns a 2002 BMW 525I. The contact received notification of NHTSA Campaign Number: 15V318000 (AIR BAGS); and would like to be removed from the recall distribution list. The local dealer and manufacturer were contacted.;
2002 BMW 525IA Complaints
TL* THE CONTACT OWNED A 2003 (NA) BMW 525IA. WHILE DRIVING 20 MPH, THE CONTACT'S VEHICLE WAS STRUCK ON THE FRONT DRIVER SIDE BY ANOTHER VEHICLE. THE AIR BAGS DEPLOYED. THE DRIVER SUSTAINED FACIAL LACERATIONS THAT REQUIRED MEDICAL ATTENTION. THE FRONT SEAT PASSENGER ALSO SUSTAINED FACIAL LACERATION AND A FRACTURED JAW. THE VEHICLE WAS DESTROYED AND TOWED TO A TOW LOT. A POLICE REPORT WAS FILED. THE MANUFACTURER WAS NOTIFIED. THE FAILURE MILEAGE WAS APPROXIMATELY 183,000.;
2002 BMW 525IA SPORT WAGON Complaints
REVERSE DRUM FOR TRANSMISSION WENT OUT UNEXPECTEDLY AT 89,000 MILES. MANY OTHERS ARE HAVING THIS ISSUE, BUT BMW HAS FAILED TO TAKE RESPONSIBILITY FOR THE DEFECT IN THE PART WHICH BREAKS DUE TO THE METAL PIECE BEING TOO THIN. NO RECALLS EITHER. BMW SHOULD BE FORCED RECALL THIS PART, AS IT COSTS $6,000 TO REPLACE THE TRANSMISSION, AND $3,500 TO HAVE IT REBUILT BECAUSE OF THIS DEFECTIVE PART. *TR;
2002 BMW 530I Complaints
We purchased two identical new Pirelli P Zero P245/35/ZR20 91Y tires and had them professionally installed. The mechanic noticed that after installation one of the tires pulled hard to one side. The vehicle was aligned but the issue persisted, so they moved the tire to the other vehicle side. Now the vehicle pulled to that side, at which point we were told the problem was the tire, either a belt separation or other internal tire manufacturing defect. They suggested we contact the manufacturer and get a warranty replacement tire. We have been trying for weeks to get a replacement tire sent out from Pirelli, but they have been unwilling to work with us.;
2002 BMW 530IA Complaints
TL* TAKATA RECALL. THE CONTACT OWNS A 2002 BMW 530IA. THE CONTACT RECEIVED A RECALL NOTIFICATION FOR NHTSA CAMPAIGN NUMBER: 15V318000 (AIR BAGS); HOWEVER, THE PART NEEDED TO PERFORM THE REPAIR WAS UNAVAILABLE. THE CONTACT STATED THAT THE MANUFACTURER EXCEEDED A REASONABLE AMOUNT OF TIME FOR THE RECALL REPAIR. THE MANUFACTURER WAS NOTIFIED OF THE ISSUE. THE CONTACT HAD NOT EXPERIENCED A FAILURE. VIN TOOL CONFIRMS PARTS NOT AVAILABLE.;