BMW of North America LLC is recalling certain model year 2014 228i Coupe

Mar 31, 2015 — Recall Campaign #15V189000

BMW of North America LLC (BMW) is recalling certain model year 2014 228i Coupe, M235i Coupe, 320i, 320xi, 328i, 328xi, 335i, 335xi, ActiveHybrid 3, 328xi Sports Wagon, 428i Coupe, 428xi Coupe, 435i Coupe, 435xi Coupe, 428i Convertible, 428xi Convertible, 435i Convertible, 328xi Gran Turismo, 335xi Gran Turismo, and 2015 428i Gran Coupe, 428xi Gran Coupe, and 435i Gran Coupe vehicles. Improper nickel plating of components within the fuel pump may result in the fuel pump failing.

The recall was influenced by the manufacturer with about 18,054 units affected.

See recall notice

NHTSA Safety Recall Notice

15V189000

Manufacturer:	BMW of North America, LLC
Recall date:	March 31, 2015
NHTSA Campaign #:	15V189000
Units affected:	18,054

Description:: BMW of North America LLC (BMW) is recalling certain model year 2014 228i Coupe, M235i Coupe, 320i, 320xi, 328i, 328xi, 335i, 335xi, ActiveHybrid 3, 328xi Sports Wagon, 428i Coupe, 428xi Coupe, 435i Coupe, 435xi Coupe, 428i Convertible, 428xi Convertible, 435i Convertible, 328xi Gran Turismo, 335xi Gran Turismo, and 2015 428i Gran Coupe, 428xi Gran Coupe, and 435i Gran Coupe vehicles. Improper nickel plating of components within the fuel pump may result in the fuel pump failing.
Consequeces:: If the fuel pump fails, the vehicle may stall without warning, increasing the risk of a crash.
Corrective action:: BMW will notify owners, and dealers will replace the fuel pump, free of charge. Owners were mailed interim notices on May 28, 2015. The recall began on July 6, 2015. Owners may contact BMW customer service at 1-800-525-7417.
Notes:: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Affects the following:

2014 BMW 228I Complaints
The contact owns a 2014 BMW 228I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. Parts distribution disconnect.;
2014 BMW 320I Complaints
I was driving on a on a busy interstate after work and out of nowhere I get the Temperature warning and start losing power. This is Dangerous! I am submitting this complaint to report a safety-related defect involving the electric water pump on my 2014 BMW 320i. This issue is widely documented among BMW owners, and several 3-Series models from the same production years have been included in recalls or service bulletins for premature water pump failure. However, the 2014 BMW 320i (F30 chassis, N20/N26 engine) is not included, despite experiencing the same failure pattern. In my case, the water pump failed without warning. During the coolant bleeding process, there was no circulation or pump activation, indicating a complete pump malfunction. This is consistent with the known failure mode of BMW’s electric water pumps, which can stop working suddenly and cause rapid engine overheating. Because the pump is electronically controlled, there is often no gradual symptom—only an abrupt loss of coolant flow that can lead to engine damage within minutes. This defect poses a significant safety risk. A sudden water pump failure can cause the vehicle to overheat while driving, potentially resulting in engine shutdown, loss of power, or being stranded in unsafe conditions. I was driving on a 2 hour drive on the country road and all of the sudden I received an engine overheating warning and began experiencing a loss of power. Given that BMW has acknowledged similar failures in other 3-Series models of the same year, it is unclear why the 320i is excluded, despite sharing the same engine family and pump design. I respectfully request that NHTSA review this issue and consider expanding the scope of existing investigations or recalls to include the 2014 BMW 320i. Owners should not be responsible for costly repairs related to a known, widespread defect that affects vehicle safety and reliability.;
2014 BMW 320XI Complaints
PURCHASED 4 COOPER EVOLUTION TOUR ALL SEASON TIRES (225 50 17 94V). DOT U940 1LT 4119 IN NOVEMBER 2019. TIRES DO NOT MAINTAIN AIR PRESSURE. TIRES REQUIRE MORE AIR WITHIN 2-4 DAYS. SIDEWALLS BULGE WHEN FULLY INFLATED CAUSING TIRES TO LOOK UNDER INFLATED BUT LOSE AIR PRESSURE IN A SHORT PERIOD OF TIME. ALSO, ROLLING EFFECT WHEN TURNING CORNERS AT LIGHT TO MODERATE SPEEDS. PLEASE PROVIDE GUIDANCE ON WHAT TO DO TO CORRECT THE FAILURE. MOST RECENT INCIDENT NOTED IN APPROXIMATE INCIDENT DATE RELATED TO LOST OF AIR PRESSURE;
2014 BMW 328I Complaints
The contact owned a 2014 BMW 328I. The contact stated while the vehicle was parked, the vehicle stalled after overheating the previous day. The contact stated that an unknown warning light was illuminated. The vehicle was towed to a dealer, where it was diagnosed that the valvetronic system needed to be replaced; while the vehicle remained at the dealer awaiting repairs, the contact was notified that the vehicle had sustained thermal damage over the weekend, caught fire, and burned completely, leaving only the frame. The vehicle was unoccupied during the fire. A police and fire department report was filed. The manufacturer was notified of the failure. The contact was later notified that the VIN was included in NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM). The failure mileage approximately 100,000.;
2014 BMW 328XI Complaints
The contact owns a 2014 BMW 328XI. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.;