Daimler Vans USA, LLC is recalling certain 2016 Mercedes-Benz Sprinter 2500 and 3500 vehicles

Oct 16, 2017 — Recall Campaign #17V650000

Daimler Vans USA, LLC (DVUSA) is recalling certain 2016 Mercedes-Benz Sprinter 2500 and 3500 vehicles. The label on the B-pillar may state a higher maximum vehicle load capacity than the vehicle is designed for. As such, these vehicles fail to comply with the requirements of 49 CFR Part 567, "Certification."

The recall was influenced by the manufacturer with about 2 units affected.

See recall notice

NHTSA Safety Recall Notice

17V650000

Manufacturer:	Daimler Vans USA, LLC
Recall date:	October 16, 2017
NHTSA Campaign #:	17V650000
Units affected:	2

Description:: Daimler Vans USA, LLC (DVUSA) is recalling certain 2016 Mercedes-Benz Sprinter 2500 and 3500 vehicles. The label on the B-pillar may state a higher maximum vehicle load capacity than the vehicle is designed for. As such, these vehicles fail to comply with the requirements of 49 CFR Part 567, "Certification."
Consequeces:: If the load capacity information is incorrect on the label, the vehicle may be overloaded, increasing the risk of a crash.
Corrective action:: DVUSA will notify owners, and dealers will check the label and replace it if necessary, free of charge. The recall began on December 15, 2017. Owners may contact DVUSA customer service at 1-877-762-8267.
Notes:: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Affects the following:

2016 MERCEDES-BENZ SPRINTER 2500 Complaints
The door latch and or roller failed which prevents the door from closing properly. Since the door does not close all the way, there is the risk that it opens while driving. This is a recurring issue I have on this vehicle and triggered a lemon-law buyback.;
2016 MERCEDES-BENZ SPRINTER 3500 Complaints
1. What component or system failed or malfunctioned, and is it available for inspection upon request?** The engine/internal engine components and fuel injection system failed. was stated in video that fuel injector looked fine. cylinder #2, including a burnt valve and damage to the top of the piston. The Mercedes-Benz dealership also stated that it was highly likely that the cylinder #2 potentially by becoming stuck wide open or developing a severely abnormal spray pattern. The failed engine and components may be available for inspection upon request, depending on the current repair status and whether the components have been retained. 2. How was your safety or the safety of others put at risk?** The engine experienced a serious internal failure while the vehicle was being driven. The dealership identified a burnt valve and piston damage in cylinder #2 and stated that a mechanical failure of the cylinder #2 fuel injector was highly likely. A catastrophic engine failure while the vehicle is being operated can result in sudden loss of engine power, creating a potential safety risk to the occupants and other motorists. 3. Has the problem been reproduced or confirmed by a dealer or independent service center? Yes. The problem was confirmed and diagnosed by a Mercedes-Benz dealership. The dealership performed a borescope inspection, compression testing, and smoke testing. The dealership documented a burnt valve in cylinder #2 and damage to the top of the piston. The dealership also stated that it was highly likely that the cylinder #2 injector had failed mechanically, either by becoming stuck wide open or developing a severely abnormal spray pattern. 4. Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? Yes. The vehicle was inspected and diagnosed by a Mercedes-Benz dealership, which confirmed the internal engine damage.;