Mercedes-Benz USA, LLC is recalling certain 2018 Mercedes-Benz E400 Cabrio and E400 4Matic Cabrio

Aug 03, 2018 — Recall Campaign #18V513000

Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2018 Mercedes-Benz E400 Cabrio and E400 4Matic Cabrio vehicles. The child seat anchoring system (ISOFIX) in these vehicles may not have been properly installed. As a result, in the event of a crash, the ISOFIX console may partially detach from the car body.

The recall was influenced by the manufacturer with about 39 units affected.

See recall notice

NHTSA Safety Recall Notice

18V513000

Manufacturer:	Mercedes-Benz USA, LLC
Recall date:	August 03, 2018
NHTSA Campaign #:	18V513000
Units affected:	39

Description:: Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2018 Mercedes-Benz E400 Cabrio and E400 4Matic Cabrio vehicles. The child seat anchoring system (ISOFIX) in these vehicles may not have been properly installed. As a result, in the event of a crash, the ISOFIX console may partially detach from the car body.
Consequeces:: If the ISOFIX console partially detaches in a crash, it can increase the risk of injury for a child in a child seat.
Corrective action:: MBUSA will notify owners, and dealers will inspect the ISOFIX console, and replace it if necessary, free of charge. The recall began September 28, 2018. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2018080015.
Notes:: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Affects the following:

2018 MERCEDES-BENZ E 400

2018 MERCEDES-BENZ E 400 4MATIC Complaints
Component/System: The intake camshaft positioner/adjuster on cylinder bank 2 of the M276 V6 engine has failed, along with associated timing components. The vehicle (2018 Mercedes-Benz E400, VIN [XXX]) remains unrepaired and is available for inspection upon request. Safety Risk: The engine produces a loud metallic rattle on cold starts, indicating loss of proper camshaft timing control. If unaddressed, camshaft timing deviation can progress to timing chain failure, which on interference engines can cause valve-to-piston contact and sudden, severe engine damage or loss of power while driving, posing a risk to vehicle control. Confirmed by Dealer: Yes. Mercedes-Benz of Catonsville (RO# [XXX]) diagnosed the issue and confirmed stored fault code P002177, indicating the intake camshaft position on cylinder bank 2 deviates from its specified value. The dealer's own notes state camshaft adjusters "are prone to failure and commonly damage camshafts when they fail." Manufacturer Notified: I contacted Mercedes-Benz USA directly (Case #[XXX]) to request they address this repair, citing that this camshaft/timing failure is a known, recurring issue on M276-equipped vehicles, supported by Mercedes' own technical service bulletins (TSB LI05.10-P-056435 and TSB LI05.20-P-059966) describing this exact failure pattern. Despite multiple attempts, including a promised callback that was never received and nearly an hour on hold with no resolution, Mercedes-Benz USA has not adequately responded or taken action. Warning Signs: The check engine light illuminated in early August 2026, prompting a dealer visit. The cold-start rattle was identified by the dealer during diagnosis the following day. No prior symptoms were noticed beforehand. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6);