BMW of North America, LLC is recalling certain 2020 X5 sDrive40i

Aug 28, 2019 — Recall Campaign #19V631000

BMW of North America, LLC (BMW) is recalling certain 2020 X5 sDrive40i, X5 xDrive40i, X5 M50i, X7 xDrive40i and X7 M50i vehicles. The steering rack pinion teeth may break under load, resulting in a loss of steering control.

The recall was influenced by the manufacturer with about 12 units affected.

See recall notice

NHTSA Safety Recall Notice

19V631000

Manufacturer:	BMW of North America, LLC
Recall date:	August 28, 2019
NHTSA Campaign #:	19V631000
Units affected:	12

Description:: BMW of North America, LLC (BMW) is recalling certain 2020 X5 sDrive40i, X5 xDrive40i, X5 M50i, X7 xDrive40i and X7 M50i vehicles. The steering rack pinion teeth may break under load, resulting in a loss of steering control.
Consequeces:: A loss of steering control increases risk of a crash.
Corrective action:: BMW will notify owners, and dealers will replace the steering rack, free of charge. The recall began August 21, 2019. Owners may contact BMW customer service at 1-800-525-7417.
Notes:: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Affects the following:

2020 BMW X5 Complaints
I am reporting a safety concern involving BMW vehicles with the B58TU engine, model years 2019-2021. These engines use a variable-displacement oil pump with an internal thermoplastic adjusting ring that regulates oil pressure. Field failures are being reported in which this component fractures, causing sudden loss or instability of oil pressure. Owners and independent shops report catastrophic engine damage within minutes, with little or no advance warning. A sudden loss of motive power at highway speed, or an engine seizure in traffic, creates a crash risk. I have not experienced a failure. I am reporting because: 1. My vehicle falls within the affected production range. 2. Owners cannot determine whether their vehicle has the original thermoplastic pump or the later metal revision. BMW issued the revised part without changing the part number, and VIN-based parts lookups reportedly return the updated component even when the original is still installed. This deprives owners of any means of assessing their own risk. 3. BMW quietly revised the design to all-metal, indicating the manufacturer identified a durability problem, yet no recall or customer notification has been issued in the United States. 4. Out-of-warranty repair requires removal of the front subframe and eight or more hours of labor. Owners report quotes near $6,000. 5. In South Korea, the Ministry of Land, Infrastructure and Transport opened a formal investigation into this same defect in XXX. BMW Korea then confirmed it is performing this repair free of charge regardless of warranty status. A foreign regulator has already found this serious enough to investigate. I request that NHTSA investigate the B58TU oil pump, determine the failure rate, and evaluate whether a safety recall is warranted. At minimum, owners should be given a reliable method of identifying which pump revision is installed in their vehicle.;
2020 BMW X7 Complaints
We came from [XXX] to [XXX] at night. It was rainy in [XXX]. We parked the vehicle in the front of the garage door of the house and went to sleep. Around 8:00-9:00AM two police cars from [XXX] PD came to our house. The officer said that the vehicle calls to BMW or 911 as an emergency and they forwarder that call to FPD. The officers checked the vehicle and they figured that the vehicle did the emergency call when was parked. Now, the emergency call system is not working, because of the bad factory sealant in the top of the roof and the water leaks exactly to the Telecomunication module (TCM). INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6);