Ford Motor Company is recalling certain 2022 Bronco and Ranger vehicles

Jun 24, 2022 — Recall Campaign #22V451000

Ford Motor Company (Ford) is recalling certain 2022 Bronco and Ranger vehicles. The windshield may not have been properly bonded to the vehicle, which could allow it to detach during a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 212, "Windshield Mounting."

The recall was influenced by the manufacturer with about 63,294 units affected.

See recall notice

NHTSA Safety Recall Notice

22V451000

Manufacturer:	Ford Motor Company
Recall date:	June 24, 2022
NHTSA Campaign #:	22V451000
Units affected:	63,294

Description:: Ford Motor Company (Ford) is recalling certain 2022 Bronco and Ranger vehicles. The windshield may not have been properly bonded to the vehicle, which could allow it to detach during a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 212, "Windshield Mounting."
Consequeces:: A windshield that separates from a vehicle during a crash can increase the risk of injury.
Corrective action:: Dealers will remove and reinstall the windshield, free of charge. Owner notification letters were mailed July 18, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22C12.
Notes:: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

Affects the following:

2022 FORD BRONCO Complaints
Clutch pedal went to floor and didn't return. The accumulator on part # MB3Z-7A512-A failed and broke apart causing a complete loss of brake fluid in the clutch hydraulic system rendering the clutch completely inoperable.;
2022 FORD RANGER Complaints
Vehicle was placed into Ford’s Neutral Tow mode according to the owner’s manual before being recreationally towed behind a motorhome. The instrument cluster displayed Ford’s confirmation that Neutral Tow was enabled and the vehicle was ready for four-wheel-down towing. The transmission failure occurred during the second day of towing. After highway travel, the transmission severely overheated, expelled transmission fluid and lost all ability to move in forward or reverse. Diagnostic code P0218, transmission over-temperature, was present. Neutral Tow was no longer enabled when the vehicle was subsequently checked. The Ford dealer states that the vehicle does not retain logs confirming whether Neutral Tow was enabled or remained enabled. Ford’s GSB 22-7086 directs the dealer to inspect for transmission damage associated with the drivetrain being rotated during recreational towing. However, the resulting damage cannot establish whether the owner failed to activate Neutral Tow or whether Ford’s electronically controlled Neutral Tow system confirmed activation and later failed to maintain the required mechanical state. The fact that the vehicle was successfully towed during the first day before failing on the second day raises concern that the transfer case, shift-control system or related electronics may have lost or failed to maintain Neutral Tow after it had been successfully activated. There are other reported incidents involving Ford Ranger, F-150 and Bronco vehicles in which owners state that Neutral Tow was confirmed but the drivetrain subsequently re-engaged, overheated or suffered catastrophic transmission damage during recreational towing. This condition presents a safety risk because Ford’s system may display that the vehicle is ready and safe to tow while potentially failing to keep the drivetrain mechanically isolated. In this incident, extremely hot transmission fluid was expelled onto the vehicle, tow equipment and surrounding roadway, creating a poss;