Volkswagen Group of America, Inc. is recalling certain 2023 Golf R A8 and Golf GTI vehicles

Jun 21, 2023 — Recall Campaign #23V437000

Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2023 Golf R A8 and Golf GTI vehicles. The strut mount may be deformed, loosening the bolted connections to the suspension strut mounting.

The recall was influenced by the manufacturer with about 59 units affected.

See recall notice

NHTSA Safety Recall Notice

23V437000

Manufacturer:	Volkswagen Group of America, Inc.
Recall date:	June 21, 2023
NHTSA Campaign #:	23V437000
Units affected:	59

Description:: Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2023 Golf R A8 and Golf GTI vehicles. The strut mount may be deformed, loosening the bolted connections to the suspension strut mounting.
Consequeces:: Loose suspension connections can cause steering instability, increasing the risk of a crash.
Corrective action:: Dealers will inspect and replace the right and/or left suspension strut mountings, as necessary, free of charge. Owner notification letters are expected to be mailed August 18, 2023. Owners may contact Volkswagen's customer service at 1-800-893-5298. Volkswagen's number for this recall is 40T3.
Notes:: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

Affects the following:

2023 VOLKSWAGEN GOLF R Complaints
The vehicle has a feature called "hill hold" that can not be disabled where it holds the brakes when stopped on a hill untill 3 seconds after removing your foot from the brake pedal. This has resulted in many near miss safety hazards because I can not move the vehicle quickly enough to make a safety maneuver in the event of imminent collision from another vehicle when stopped on a hill.;
2023 VOLKSWAGEN GTI Complaints
Acquired this vehicle at 6,800 miles. At about 10k miles the clutch went out and had to be replaced. This should have been the stock clutch system. I was able to examine the old clutch kit. It was determined that the disk was damaged due to overheating, the throw out bearing had cracked in pieces, and the fly wheel had signs of overheating as well. I then replaced it with an aftermarket kit from ECS Tuning. The whole kit was replaced and a OEM throw out bearing was replaced. Turns out the kit didn't work well with my vehicle and burned out at about 2k miles later. Then I replaced the clutch kit once again, this time with OEM SACHS clutch kit [throw out bearing, clutch disk, pressure plate, fly wheel] which I was told this vehicle comes with this kit from the factory. Now, that was at about 18,800 miles, so about 6k miles on this kit, I am starting to notice some signs of defectiveness once again. Could there be an issue that hasn't been addressed with the proper kit or is there a need for a recall....;