CHRYSLER NEW YORKER Recalls

Jul 01, 1988 – FUEL LEAKAGE MAY OCCUR IN LOW AMBIENT TEMPERATURE OPERATION AT CONNECTIONS OF AN ENGINE COMPARTMENT FUEL SUPPLY HOSE TO THE PRESSURE REGULATOR AND TO THE FUEL RAIL.

Apr 08, 1988 – A SERVICE REPLACEMENT DRIVERS SEAT CUSHION (MANUAL SEAT TYPE) MAY CONTAIN WRONG CUSHION WITH A BRACE THAT COULD INTERFERE WITH POWER SEAT ADJUSTER MECHANISM AND CAUSE STRESS ON THE FRAME.

Apr 10, 1986 – BATTERY CAP VENTS MAY BE PARTIALLY OR COMPLETELY BLOCKED WITH PLASTIC FLASHING. CONSEQUENCE OF DEFECT: A BUILD UP OF INTERNAL GAS PRESSURE COULD OCCUR WHICH COULD RESULT IN CASE RUPTURE, PARTICULARLY DURING POST CHARGING. SHOULD A PERSON BE IN THE VICINITY OF THE BATTERY WHEN THE CASE RUPTURES, THEY MAY BE INJURED BY THE RELEASED GASES AND/OR ACID.

Feb 19, 1986 – A RESISTOR IN THE ELECTRONIC PANEL CLUSTER MAY BE SUBJECTED TO AN ELECTRICAL CURRENT OVERLOAD DUE TO FAILURE OF A SWITCHING TRANSISTOR. CONSEQUENCE OF DEFECT: THE OVERHEATED RESISTOR COULD IGNITE AND START AN INSTRUMENT PANEL FIRE.

Jan 01, 1985 – AN ENGINE COMPARTMENT FUEL HOSE ROUTED TO THE FUEL SYSTEM PRESSURE REGULATOR MAY HAVE AN INADEQUATELY TIGHTENED HOSE CLAMP. CONSEQUENCE OF DEFECT: THE FUEL HOSE COULD LEAK AND RESULT IN AN ENGINE COMPARTMENT FIRE.

Jun 06, 1983 – LOCATION OF HYDRAULIC BRAKE TUBE TO BOTH REAR WHEELS CAUSES INTERFERENCE AND CHAFING BETWEEN THE TUBES AND REAR SUSPENSION TRAILING ARM PIVOT BRACKETS.

Sep 22, 1981 – THE AUTOMATIC SPEED CONTROL SWITCH MAY STICK IN THE "RESUME" POSITION RESTRICTING RETURN MOVEMENT. THIS WILL NOT ALLOW THE NORMAL BRAKE PEDAL OPERATION TO DEACTIVATE THE SYSTEM.

May 05, 1981 – ENGINE MAY LOSE POWER OR STALL DUE TO CARBURETOR FLOODING. THIS IS CAUSED BY A POOR ELECTRICAL GROUND ON THE CARBURETOR FUEL BOWL VENT SOLENOID. VEHICLES MAY ALSO HAVE DRIVEABILITY PROBLEMS WHILE THE ENGINE IS WARMING UP IN COLD WEATHER. THESE PROBLEMS INCLUDE ENGINE MISSING, SAGS, AND HESITATION. THIS IS CAUSED BY A STICKING CARBURETOR OXYGEN FEEDBACK SOLENOID.

Jan 05, 1979 – THE INVOLVED VEHICLES MAY HAVE BEEN ASSEMBLED WITH AN OVERSIZED RIGHT FRONT WHEEL BEARING CUP WHICH ALSO PREVENTS THE PLANT LUBRICATING EQUIPMENT FROM CYCLING TO LUBRICATE BOTH THE INNER AND OUTER WHEEL BEARINGS. THE RESULTANT BEARING LOOSENESS AND/OR THE LACK OF LUBRICATION MAY CAUSE BEARING FAILURE AND, POSSIBLY, WHEEL SPINDLE DAMAGE.

Nov 16, 1977 – AN INTERRUPTION OF THE MAIN ELECTRICAL POWER FEED CIRCUIT FROM THE BATTERY AND ALTERNATOR MAY OCCUR DUE TO SEPARATION OF A TERMINAL CONNECTION IN THE WIRING CIRCUIT. THE TERMINAL END OF THE POWER FEED WIRE COMING FROM THE COMPARTMENT MAY SEPARATE FROM ITS MATING TERMINAL ON THE WIRE GOING INTO THE PASSENGER COMPARTMENT AT THE MULTIPLE CIRCUIT CONNECTOR (KNOWN AS THE BULKHEAD CONNECTOR) LOCATED ON THE LEFT (DRIVER"S) SIDE OF THE ENGINE COMPARTMENT FIREWALL.