FCCC XC Recalls

Mar 01, 2016 – Daimler Trucks North America LLC (DTNA) is recalling certain model year 2014-2016 Freightliner Custom Chassis XCP chassis manufactured from April 26, 2013, through January 15, 2015. The power steering fluid temperature may exceed the power steering hose material ratings on some rear engine chassis built with certain 18,000lb and 20,000lb-load capacity front axles used in motor home applications. This can cause the hose to fail, resulting in a sudden loss of power steering fluid and power assist.

Sep 17, 2014 – Daimler Trucks North America LLC (DTNA) is recalling certain model year 2015 Freightliner 108SD, 114SD, and M2 Business Class; Thomas Built Buses HDX; Western Star 4700; and FCCC MBC, MC, MT45, MT55, S2C 106CAB, Sport M2 106, XBR, XBS, XCL,XCM, XCR, and XCS vehicles manufactured May 2, 2014, to July 31, 2014. The Cummins ISB or ISL engines in these vehicles may have been equipped with Fleetguard UFF-XT fuel filters, part number FF63009, whose filter shell may separate from the fuel filter nut plate causing the engine to stall without warning.

Sep 15, 2011 – DAIMLER TRUCKS IS RECALLING CERTAIN MODEL YEAR 2011- 2012 BUSINESS CLASS M2 AND CORONADO TRUCKS MANUFACTURED FROM SEPTEMBER 1, 2010, THROUGH DECEMBER 31, 2010, EQUIPPED WITH A CUMMINS ISX OR ISL DIESEL ENGINE. THE V-BAND CLAMP ASSEMBLY, PART NUMBERS Q187684, Q187685, AND Q187686, USED TO CONNECT THE INLET AND OUTLET CONE SECTIONS TO THE DIESEL OXIDATION CATALYST (DOC)/DIESEL PARTICULATE FILTER (DPF) INCLUDE A T-BOLT WHICH CAN FRACTURE AND FAIL WHEN SUBJECTED TO STRESS OR LOAD. A FRACTURE OR FAILURE OF THE T-BOLT MAY CAUSE THE CLAMP TO LOOSEN AND THE INLET OR OUTLET SECTIONS ATTACHED TO THE DOC/DPF HOUSING TO DISCONNECT.

Dec 17, 2008 – DAIMLER TRUCKS NORTH AMERICA (DTNA) IS RECALLING 24,650 SCHOOL AND NON-SCHOOL BUSES, MOTOR HOME CHASSIS, AND TRUCKS MANUFACTURED FROM MARCH 9, 2004 THROUGH AUGUST 18, 2006, EQUIPPED WITH EPA04 CERTIFIED MBE900 ENGINES, MANUFACTURED BY DETROIT DIESEL BETWEEN MARCH 1, 2004, AND JULY 31, 2006. THE HIGH PRESSURE FUEL LINES AND TRANSFER TUBES MAY FATIGUE AND FRACTURE.

Jun 17, 2008 – DAIMLER TRUCKS IS RECALLING 2,506 MY 2008 XC MOTOR HOME CHASSIS AND THOMAS BUILT HDX SCHOOL AND TRANSIT BUSES EQUIPPED WITH SAF-HOLLAND ADL SERIES REAR SUSPENSIONS. IN SOME INSTANCES THE TRANSVERSE BEAM WAS NOT PROPERLY WELDED WHICH COULD RESULT IN A FAILURE OF THE WELD.

Jan 28, 2008 – ON CERTAIN TRUCKS AND MOTOR HOMES CHASSIS, INCORRECT FASTENERS MAY NOT PROVIDE ADEQUATE CLAMPING FORCE BETWEEN THE BRAKE CALIPER AND BRAKE ANCHOR PLATE POTENTIALLY RESULTING IN REDUCED BRAKE EFFECTIVENESS.

Aug 08, 2007 – CERTAIN MOTOR HOME CHASSIS EQUIPPED WITH ZF MODEL 8018 STEERING GEARS MAY HAVE BEEN ASSEMBLED WITH THE INCORRECT RECIRCULATING BALL SPACER. THIS COULD POTENTIALLY ALLOW THE RECIRCULATING BALLS TO ESCAPE FROM THE RECIRCULATING BALL CIRCUIT RESULTING IN A LOSS OF STEERING.

Jul 20, 2007 – ON CERTAIN MOTOR HOMES BUILT WITH CUMMINS ISL CM850 DIESEL ENGINES, THE CONNECTING ROD CONTAINS A MACHINING DEFECT IN THE WRIST PIN BUSHING OF THE ROD THAT COULD CAUSE A SEIZURE OF THE PISTON PIN.

Jul 16, 2007 – CERTAIN FREIGHTLINER SCHOOL BUS CHASSIS, HEAVY TRUCKS, AND THOMAS BUILT SCHOOL BUSES MANUFACTURED BETWEEN JULY 2002 AND JULY 3, 2007, EQUIPPED WITH BENDIX SR-7 SPRING BRAKE CONTROL VALVES. THE PARKER SCV BRASS 90 DEGREE SINGLE CHECK VALVES (SCV) WHICH ATTACH TO THE SUPPLY PORT OF A BENDIX SR-7 SPRING BRAKE MODULATING VALVE CAN BREAK APART. PIECES OF THE PARKER SCV CAN BECOME LODGED INSIDE THE SR-7 SPRING BRAKE MODULATING VALVE, POTENTIALLY CAUSING EITHER LEAKAGE OUT OF THE SR-7 VALVE OR PREVENTING AIR FROM PROPERLY EXHAUSTING FROM THE SR-7 VALVE. ALSO, DUE TO A MANUFACTURING DEFECT IN THE INTERNAL RUBBER CHECK VALVE INSIDE THE SR-7 SPRING BRAKE MODULATING VALVES, THE VALVES CAN BECOME DEFORMED AND NOT SEAT PROPERLY.

Oct 05, 2005 – CERTAIN 2004 AND 2005 FREIGHTLINER VAN, MOTOR HOME, SHUTTLE BUS, AND SCHOOL BUS CHASSIS MANUFACTURED BETWEEN JANUARY 2004 AND MAY 2005. ERRATIC VOLTAGE SUPPLY TO THE FUEL LIFT PUMP CAUSES PREMATURE WEAR OF THE PUMP. THIS PREMATURE WEAR COULD RESULT IN FUEL LIFT PUMP FAILURE AND IN SOME CASES MAY CAUSE AN ENGINE STALL CONDITION.