FORD Recalls

Feb 02, 2012 – FORD IS RECALLING CERTAIN MODEL YEAR 2011 F-53 AND F-59 STRIPPED CHASSIS VEHICLES MANUFACTURED FROM FEBRUARY 1, 2010 THROUGH JULY 1, 2011 AND CERTAIN MODEL YEAR 2012 F-53 AND F-59 STRIPPED CHASSIS VEHICLES MANUFACTURED FROM MAY 10, 2011 THROUGH OCTOBER 25, 2011. THE ?PRNDL? CABLE MAY BREAK AT THE ATTACHMENT TO THE TRANSMISSION CONTROL SELECTOR ARM ASSEMBLY MOUNTED ON THE STEERING COLUMN. IF THE CABLE BREAKS, THE TRANSMISSION GEAR INDICATOR IN THE ?PRNDL? DISPLAY IN THE INSTRUMENT PANEL WILL REMAIN IN THE FIRST GEAR POSITION REGARDLESS OF THE GEAR SELECTED.

Feb 02, 2012 – TURTLE TOP IS RECALLING CERTAIN MODEL 2008 THROUGH 2011 ODYSSEY, ODYSSEY XL, AND ODYSSEY LT VEHICLES MANUFACTURED FROM FEBRUARY 11, 2008, THROUGH OCTOBER 26, 2011, AND BUILT ON FORD, GENERAL MOTORS, AND FREIGHTLINER CHASSIS, EQUIPPED WITH A CARRIER CORPORATION GEN V EM-1 EVAPORATOR. THE EM-1 EVAPORATORS CONTAIN A FUSE HOLDER IN THE MOTOR ASSEMBLY WHICH DUE TO TIME, TEMPERATURE, AND/OR VIBRATION MAY CAUSE THE FUSE TO LOOSEN IN THE FUSE HOLDER, RESULTING IN HIGH RESISTANCE AND ARCING.

Jan 12, 2012 – FORD IS RECALLING CERTAIN MODEL YEAR 2011 F-650 TRUCKS, MANUFACTURED FROM FEBRUARY 2, 2011, THROUGH FEBRUARY 17, 2011, AND EQUIPPED WITH A MERITOR MFS08 FRONT STEER AXLE. THE BOLTS ATTACHING THE STEERING ARM TO THE STEERING KNUCKLE WERE NOT PROPERLY TIGHTENED. THIS CONDITION CAN RESULT IN THE STEERING ARM LOOSENING OR SEPARATING.

Jan 09, 2012 – FORD IS RECALLING CERTAIN MODEL YEAR 2001-2002 ESCAPE VEHICLES MANUFACTURED FROM OCTOBER 22, 1999, THROUGH JULY 19, 2002, EQUIPPED WITH A BRAKE MASTER CYLINDER RESERVOIR CAP THAT COULD LEAK BRAKE FLUID. IF BRAKE FLUID LEAKS FROM THE CAP, IT COULD COME IN CONTACT WITH THE ANTILOCK BRAKE SYSTEM (ABS) MODULE WIRING HARNESS CONNECTOR.

Jan 09, 2012 – FORD IS RECALLING CERTAIN MODEL YEAR 2004 AND 2005 FORD FREESTAR AND MERCURY MONTEREY VEHICLES. THE TORQUE CONVERTER OUTPUT SHAFT MAY FAIL.

Dec 08, 2011 – FORD IS RECALLING CERTAIN MODEL YEAR 2011 F-150 VEHICLES MANUFACTURED FROM SEPTEMBER 9, 2011, THROUGH SEPTEMBER 22, 2011, AND MODEL YEAR 2012 F-250, F-350, F-450 AND F-550 HEAVY DUTY VEHICLES MANUFACTURED FROM SEPTEMBER 12, 2011, THROUGH SEPTEMBER 22, 2011. THESE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NUMBER 114, ?THEFT PROTECTION.? THE TRANSMISSION CAN BE SHIFTED OUT OF THE PARK POSITION WITHOUT PRESSING THE BRAKE PEDAL DUE TO BRAKE SHIFT INTERLOCK SWITCH PROBLEM.

Dec 07, 2011 – FORD IS RECALLING CERTAIN MODEL YEAR 2010-2011 FORD FUSION AND MERCURY MILAN VEHICLES EQUIPPED WITH 17 INCH STEEL WHEELS AND BUILT FROM APRIL 1, 2009, THROUGH APRIL 30, 2009, AND FROM DECEMBER 1, 2009, THROUGH NOVEMBER 13, 2010. THE WHEEL STUDS MAY FRACTURE, POTENTIALLY CAUSING A WHEEL TO SEPARATE.

Nov 08, 2011 – FORD IS RECALLING CERTAIN REPLACEMENT FUEL TANKS THAT COULD BE INSTALLED INTO MODEL YEAR 2004 THROUGH 2008 E-150, E-250, AND E-350 VANS AND WAGONS. THE AFFECTED FUEL TANKS HAVE AN EXTRA OBDII SENSOR HOLE ON THE TOP OF THE TANK THAT MAY NOT BE PROPERLY SEALED AND MAY LEAK FUEL.

Aug 31, 2011 – ROUSH IS RECALLING CERTAIN AFTERMARKET ROUSH CLEAN TECH LIQUID PROPANE AUTOGAS FUEL SYSTEM KITS USED FOR INSTALLATION ON THE FOLLOWING VEHICLES: MODEL YEAR 2007 AND 2008 FORD E-350 (DUEL REAR WHEEL), MY 2009-2011 FORD E- 150, E-250, AND E-350, AND MY 2009-2011 FORD E-450 CUTAWAYS. THE FUEL RAILS INCLUDED IN THE KITS CONTAIN IMPROPERLY SEATED INJECTOR RETENTION CLIPS. THIS COULD RESULT IN LEAKAGE OF PROPANE AUTOGAS. THE PART NUMBERS OF THE AFFECTED KITS ARE: P07C2-176KIT-AB, P10C2-RCOMMKIT-AB, P10C2-R150KIT-AA, P10C2-R150KIT-AC, P10C2-R350KIT-AC, P11C2-R150KIT-AA, P11C2-R150KIT-AB, P11C2-R350KIT-AA, P11C2-R350KIT-AB, P10-SO-RKIT-BA, PBC2-RKIT158-AB, PBC2-RKIT176-AB, AND PBC2-RKITMB-AC.

Aug 31, 2011 – ROUSH IS RECALLING CERTAIN MODEL YEAR 2009-2011 FORD E-150, E-250, AND E-350 5.4L ENGIN VANS/WAGONS/CUTAWAYS, AND MODEL YEAR 2010-2011 FORD E-450 6.8L ENGINE CUTAWAY VEHICLES ALTERED BY ROUCH TO OPERATE USING THE ROUSH BRANDED CLEANTECH PROPANE AUTOGAS FUEL SYSTEM. THE FUEL RAILS INCLUDED IN THE KITS CONTAIN IMPROPERLY SEATED INJECTOR RETENTION CLIPS. THIS COULD RESULT IN LEAKAGE OF PROPANE AUTOGAS.