FREIGHTLINER FL-60 Recalls

May 06, 1999 – VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH HYDRAULIC BRAKES. THE HYDRAULIC BRAKE TUBE TO THE FRONT LEFT BRAKE CAN CONTACT THE BOTTOM FRAME RAIL FLANGE.

Apr 20, 1999 – VEHICLE DESCRIPTION: TRUCKS EQUIPPED WITH A DRIVELINE PARKING BRAKE. THE FASTENERS THAT CONNECT THE END OF TRANSMISSION COMPANION FLANGE TO THE PARK DRUM AND DRIVELINE MAY LOOSEN.

Jan 05, 1998 – VEHICLE DESCRIPTION: TRUCK/TRAILERS. THE CERTIFICATION LABELS INSTALLED ON THESE VEHICLES ARE INCORRECT. THE GROSS AXLE WEIGHT RATING IS TOO HIGH FOR THE TIRES THAT WERE INSTALLED.

Nov 20, 1996 – VEHICLE DESCRIPTION: ALL VEHICLES EQUIPPED WITH EATON DRIVE AXLES AND AXILOK SPINDLE NUTS. THE DRIVE AXLE HOUSINGS CONSIST OF A PLATE STEEL CENTER SECTION AND TWO FORGED SPINDLES, ONE OF WHICH IS WELDED TO EACH END OF THE CENTER SECTION. EACH SPINDLE CONTAINS A KEYWAY SLOT IN WHICH THE LOCKING TAB FOR THE WHEEL BEARING NUT LOCKING MECHANISM IS INSERTED. THE LENGTH OF THE KEYWAY SLOT MAY NOT BE LONG ENOUGH TO ACCOMMODATE THE TAB CAUSING THE TAB TO BE DEFORMED OR DAMAGED DURING INSTALLATION.

May 09, 1995 – THE PARKING BRAKE LEVER MAY NOT TRAVEL FAR ENOUGH OVER CENTER TO ASSURE THAT IT REMAINS IN THE PROPER POSITION ALLOWING THE VEHICLE TO ROLL AWAY WHILE PARKED.

Apr 03, 1995 – AIR SYSTEM BLOCKAGE IN THE AIR DRYER OCCURS DEGRADING THE MOISTURE REMOVING CAPABILITIES OF THE DRYER WHEN THE VEHICLE IS OPERATED IN A COLD ENVIRONMENT AND MOISTURE ACCUMULATES AND FREEZES IN THE AIR DRYER OR IN THE LINE BETWEEN THE DRYER AND THE AIR SYSTEM RESERVOIR. THE AIR DRYER CAN BECOME OVER PRESSURIZED CAUSING THE AIR DRYER CARTRIDGE TO SEPARATE FROM THE MOUNTING BASE.

Feb 06, 1995 – THE BRAKE CHAMBER MOUNTING STUDS CAN LOOSEN OR PULL THROUGH DUE TO FATIGUE IN THE BRAKE CHAMBER HOUSING CAUSED BY FOUNDATION BRAKE CHATTER.

Apr 14, 1992 – A NUMBER OF CABS WERE ASSEMBLED WITH FEWER WELDS THAN SPECIFIED IN THE UPPER B PILLAR NEAR THE ANCHORAGE FOR THE SEAT BELT. WELDING MATERIALS USED ON THE INBOARD ANCHORAGE BRACKET UNDER THE CAB DECK WILL NOT MEET FMVSS NO. 210 LOAD TEST REQUIREMENTS WHEN THREE SEATING POSITIONS ARE PROVIDED.